Report Header problem when exporting as Editable RTF

Hey i was advised to post my query to this forum. My query is this Thread My report Header shows underneath my Page Header in Crystal reports 2008 can someone help me please?

hi Demeleo,
i was going through old forum posts and saw this one...did this get resolved?
Hey
I created reports in Visual Studio 2008 with crystal reports basic, i then upgraded to Crystal reports 2008 so i could be able to export them as EditableRTF. My first problem was i could not open my reports in VS 2008 anymore, but i do open them in The CR 2008 IDE. My problem now is when i export my reports my report header appears underneath my page header and my page number stays one. I noticed this happens when i export a report as EditableRTF.How can i Export my report to be editable without having this problems?
using cr 2008 v1 (for cr server) i was not able to reproduce this issue when exporting to RTF.
when exporting to Word, Editable, i can see this issue. mostly because the word export has the cr page header info going into the word page header.
as the word export is essentially an RTF export anyway, i would recommend getting the latest patches / service pack for your cr and the RTF export should be what you're looking for.
jamie

Similar Messages

Character disappearing in export to editable rtf

When exporting a report to "Microsoft Word (97-2003) - Editable (*.rtf)" from the Crystal Viewer in my .net 4.5 project, any time a field contains just an 'I' it gets left out. When I view it in Word, it appears that [tab]I[tab] is merged into a single tab during the export. Any other export type, it seems to work fine, but the frames make editing the exported report a real pain. If I don't want frames, I don't get to keep the letter I. Anyone have any ideas what this is happening, or how I might get around it.
If you look at the attached image, my problem is on line 33, with a blue box highlighting the actual issue.

That fixed it. Thanks. Kind of feel dumb as that's the kind of solution I would have suggested to someone else, but didn't think of it myself.

Hyperlink problem when exporting to PDF

We are using Crystal Reports XI R2 and having a problem when exporting a report to PDF that contains a Hyperlink to "A File". The hyperlink works correctly when previewed inside Crystal but when it is exported to a PDF the text does not appear to show any hyperlink at all. Am I missing something or is this a bug?

Hi Brian
Please visit the following URLs that talk about the issue.
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014557&sliceId=&dialogID=25464253&stateId=1%200%2025430948
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014405&sliceId=&dialogID=25464259&stateId=1%200%2025430949
You can also download the CR XI R2 Service Pack 4 by using the following URL and check for the results.
- https://websmp208.sap-ag.de/bosap-supportsw
- Then choose Crystal Reports from 'Software Products' dropdownlist,XI Release 2 from 'Product Version' dropdownlist and service packs from 'Software Types' dropdownlist.

Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis B

Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

Problem when exporting Universe to Enterprise

Hi All,
I am facing problem when exporting universe to enterprise. I am getting the following error.
"You do not have the right to add objects to the folder /webi universes" .
1) I tried logging with admin account still getting the same error.
2) I tried adding my user id to admin group but still has the same problem.
I did not make any new changes to security. Do not know what might be the reason. Any ideas would be greatly appreciated.
Environment: BOXI 3.1, windows server 2003.
Thanks and Regards
Sudharsan.

Hi Prasanna,
1) I checked the rights on universes for Administartors and Everyone for webi universes folder :
Universe Security:
      a) Administartors: Private
      b) Everyone has public.
User Securtiy:
      a) Administrator : has full access
      b) Everyone : No access
2) I tried adding my user id to admin group and exported it, but no luck. I also brought a new user into the system (thinking that i might have some restrictions some where) and added him to admin group and tried with his user id too but still has same problem.
Thanks
Sudharsan.

XI Page Header conditional suppression not exporting to editable RTF

I have a report that I don't want the page header to print on the first page (using the report header instead). It works great exporting to everything except editable RTF.
If i have a suppression condition on the page header, it doesn't print on any of the pages on the rtf. If I have no suppression, it prints on each page (including the first). Is this 'by design'? Is there a work around? Is it slated for a future enhancement? Bug Fix? I can't find any information on this situation. I'm assuming it's similar to the 'Page # of #' problem.
The customer insists on an editable RTF... as they want to edit it before sending it out to their customers!
If anyone has any ideas, knowledge, workarounds... I'd love to hear about it! Thanks!
Belinda

Here is a workaround that I just tried and it works:
1. Create a "FakeGroup" formula:
WhileReadingRecords;
2. Insert Croup by "FakeGroup" formula
3. Move it to the top grouping level
4. Go to Options in Group Expert and click Repeat Group Header On Each Page
5. Go to Section Expert and conditionally suppress Group Header 1 (onfirstrecord)
6. Move all content of your Page Header to Group Header1
7. Suppress Page Header

Format problem when export to RTF

Hi,
Iam creating a RTF template, when export to pdf everything working fine. However, when i export to RTF(word) alot of document properties got lost such as :
font size default to 12 when it's blank line; page number are not re-start for multi sections; table properties not holding, header, footer and edge margin are not holding, etc...... Is there any way to fix these. I tried to create a word macro to fix some of the format problems, but the macro have to run manually instead of initialized form a text field option on exit. Any idea on how to fix or work around would be appreciated.
Thanks,
Tam

im2famous4u wrote:
Do you know if and when Pages will provide support for tables in rtf format? (My school requires that I send all assignments rtf format.)
As Yvan points out, no one here can write what they know about it, and the vast majority of us know nothing about it.
You cannot take any decision based on the assumption that Pages will one day support tables in RTFs, because it may never happen. If you need both RTF and tables, the only option is another tool (like NeoOffice, TextEdit, MS Office and so on).

Crystal Reports Formatting issues when exporting to Word Editable document

Version: CR XI, I am editing a document exported from CR to Word Editable
When exporting to a Word Editable (.rtf) document the formatting changes. For example: lines that were drawn in the report do not come across, there is a tab in front of each line and a carriage return at the end of each line and spacing and justification formatting are not the same. Is there a way to export to Word Editable and keep the formatting integrity? This report was developed by a third party but I can edit it if needed.

Pages 5 is, as an early reviewer put it, "an unmitigated disaster." Not only does it lack some 100 feautres that are present in Pages 09 (4.3), it is also VERY buggy, A quick look through these discussions will reveal a painful litany of data corruption, files that cannot be opened, lost data, and other anomalies. Links do not export reliably to PDFs, and, as you've discovered, export to .docx format is unreliable. Sadly, the best advice is to trash Pages 5.1 and use Pages 4.3 or — yes, it's come to that — Word instead.

The problem with the correct diagnosis sensitive when exporting PDF to RTF

Welcome.
I came across the following error when converting PDF files to RTF program "Adobe Acrobat XI Pro" - it happens that some files (unfortunately, they form the majority of those who support it) some letters for some reason are not properly converted - for example, instead of getting a word in capital letters word in which the first letter is small and the other large. This is just one of many examples - "POLICE" -> "pOLICE", etc.
Can someone already encountered a similar problem?Is interesting to add that when I open this PDF in the "Adobe Reader" and choose "save as" -> "text" - the letters are incorrect.
I apologize in advance for any spelling mistakes - the text is translated automatically :-)
PDF:
RTF:

Unfortunately, this was afraid ... I understand that there is no way to get around this? I do not have any influence on how the PDF files are created - just get there already, and I bring them into a fully editable (RTF).

Problem when exporting the report to PDF viwer a 45,000-page report

I am using Visual Studio 2013 with the report vivew.
I have a report that works correctly, however when generating a 45000 pages he is giving memory error when exporting to PDF, any tips?

Check this SAP Note: 1089388 Incorrect value in exported PDF when Concat function is used
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=1089388]

Cross Tab Formatting Problem when exported to excel

Hi There,
I got a problem with cross tab when exported to excel, Call_id field is occupying 4 cells. Below is the structure
AssignedGroup-Call_Id-Total
A--1001-
A--1011-
Total-----2-
B--1021-
B--1031-
Total-----2-
C--1041-
Total-----1-
can anyone help? How to restrict call_id to fit in single cell?
Thanks,
Jyothi
Edited by: Jyothi Yepuri on Sep 16, 2009 7:50 AM

Yeah.. crystal has giving some issues while exporting reports without SPs, especialy previous versions.
So Better to install latest SP or patches for CR 10.0. I think SP 6 is the updated one for CR10.0.
For More info Go through this link,
http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR10
Regards,
Salah

Reports output delayed when exported to Excel using OLE2

Hi All,
Platform - Oracle Application Server 10g Release 2 10.1.2.3 on Windows 32 bit.
The report output is getting generated in a minute when exported to PDF i.e destype=cache & desformat=pdf. When we generate the output to excel is considerably delayed. It is taking time and internal server error is occuring.
1) Report developed with simple query
2) Used RPT2XLS procedure which uses OLE2 builtin to export report output into excel.
3) Called RPT2XLS.run procedure in After-Report trigger of the report.
4) We have relased all memory objects in the RPT2XLS package after exporting data and there is no EXCEL.exe running once the file is generated.
System parameters used in the URL.
. destype=file
desformat=pdf
CONTAINSOLE=yes (Required for exporting OLE2 objects into Excel in report)
desname=path & name of the file.
I have gone through the tuning documents for reports server and increased minengine, maxengine and initengine parameters of the reports engine and also changed maxconnect and IdleTimeout parameters in reports server configuration file.
What might be the reason for delaying in the output of the reports when exported to Excel. Can the guys with special knowledge on this area help us in getting out of this issue.
Thanks in advance.

hey all,
Thanks everyone for the reply.
I am using the foloowing field cat:
l_col_pos = l_col_pos + 1.
    wa_fieldcat-col_pos = l_col_pos.
    wa_fieldcat-outputlen = 32.
     wa_fieldcat-fieldname = 'SOLLWERT'.
     wa_fieldcat-inttype   = 'P'.
*    wa_fieldcat-tabname = 'i_final'.
    wa_fieldcat-seltext_l = text-t11.         "Target Value
    APPEND wa_fieldcat TO i_fieldcat.
    CLEAR wa_fieldcat.
I have use this also in the field cat but stil i get space in the excel header.
wa_fieldcat-REF_FIELDNAME = 'SOLLWERT'.
*    wa_fieldcat-REF_TABNAME = 'QAMV'.
Also the space comes with the descrip[tion in the cell of excel.
its like [space Target Value] and i dont need this Space.
I have also used wa_layout-colwidth_optimize = 'X'. but it doesnt wrk.
Please suggest

Transition problems when exporting to flash

I built a DVD menu with transitions to the different submenus and when I exported the project to flash the transitions were in the wrong aspect ratio and at a lower quality. Is there a way to make it look more seamless?
Thanks,
Matt

You may have encountered a problem that does not have a solution. I’m afraid you’ll have to use other software to generate large JPEG files.
See this technote:
http://go.adobe.com/kb/ts_tn_18893_en-us
------- quote ------
Large files are giving out of memory errors when trying to export the files from FreeHand MX. For example, when exporting a file as JPEG with the settings of Resolution: 300 DPI, Anti aliasing: 2, Include Alpha: selected and Quality: 100% the program will generate an error: "Not enough memory to complete command."
Solution
No workaround has been found for this issue. It has been reported to the engineering team._

Report Header problem when exporting as Editable RTF

Similar Messages

Maybe you are looking for