Report Headings are not displaying after moving request to production
Dear all
A request has been moved to production server for a new report from quality to production server.
First we moved the request from development to quality.
In quality server , the new report is executing successfully, but coming to production,
after moving the request successfully, the headings of the fields are not coming (displaying the database table fields).
I am not understanding why it is happening.
Can anyone suggest me, what to do for executing the report with specified headings for the columns
Thanks & Regards
Maheshwar Rao. G
Dear SIr
I imported again with new request, it came ..but why itz happened in last time.
Thanks & regards
Maheshwar Rao. G
Similar Messages
-
New created values are not displaying after upload
Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AMHi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards -
On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?
OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well. -
Mails are not displayed after migration to new iMac
Hello!
Today I migrated the contents of my old office iMac (G4, MacOS 10.4.11) to my new one (new 20'', MacOS 10.5) via FireWire.
Unfortunately my mails are not displayed on my new Mac:
I can see all my mailboxes on the left side, but the window, that should show the mails themselves is empty. I already took a look into the /library/mail folder and all my mails seem to be there.
They are just not displayed.
I use mail on that Mac with only one POP account.
What could cause this behaviour?
Thank you very much in advance!
ThomasI figured out niw, how to solve the problem:
After the migration go to the Userdirectory-> Library -> Mail and delete the files:
MessageRules.plist
MessageRules.plist.backup
MessageSorting.plist
MessageSorting.plist.backup
Then Mail works properly.
(The only thing ist, that all filer rules are gone.) -
SAP Webdispatcher :Images are not displayed after using the URL filtering
Hello,
I have installed the SAP webdispatcher 7.3 on Linux redhat 5.4 in front of the Portal 7.3.
I wanted to restrict the access just for the IRJ prefix so for this i used the parameter wdisp/permission_table = PermFile
with Permfile as follows:
#Denial of the useradmin URL from the WebDispatcher
P /irj*
P /irj/*
The filtering is working well except that for IRJ the images are not displayed so i was using so i added the following line to disply the images to the logon page
icm/HTTP/auth_
P /logon_ui_resources/*
P /logon_ui_resources*
but i still have the same issue for the irj page where no icons are displayed and i can do nothing.
The same issue also happened when using the icm/HTTP/auth_xx
Do you have an idea how to deal with this issue?
Thanks in advance;
HassanHello,
After checking the HTTP code of the irj page on IE, i foud the needed URL to permit so i modified the permision table and it works fine for the moement
P /irj*
P /irj/*
P /logon_ui_resources/*
P /logon_ui_resources*
P /AFPServlet/*
P /AFPServlet*
P /com.sap*
P /com.sap/*
P /webdynpro/resources*
P /webdynpro/resources/*
Thanks for you help,
Hassan -
OA_MEDIA images are not displayed after importing VO
My requirement is to add a custom check box to MES Operator page. In the process I extended CO, VO successfully and the check box functionality is working fine. But we found out that some images (coming from $OA_MEDIA) are not displayed. There are two image columns in the page. Images in one column are displayed while images in other aren't. Also what I have observed is, missing images are displayed until I run the VO import on server.
Any help would be appreciated.
Thanks.Can anyone please help me with this issue?
-
"Request for Reporting available " is not displayed after loading the data.
Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyeeHi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy. -
In content query webpart columns are not displaying after clicking on edit webpart.
Hi,
I created a content query webpart. I added one custom item style in ItemStyle.xsl. This template having some date operations. Some date comparisons. The issue is, template containing some variables but after selecting my template it is not showing the variable
names to enter the list column. What will be the issue? Below is the code..
<xsl:template name="BirthdayList" match="Row[@Style='BirthdayList']" mode="itemstyle">
<xsl:variable name="SafeImageUrl">
<xsl:call-template name="OuterTemplate.GetSafeStaticUrl">
<xsl:with-param name="UrlColumnName" select="'ImageUrl'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="DisplayTitle">
<xsl:call-template name="OuterTemplate.GetTitle">
<xsl:with-param name="Title" select="@Title"/>
<xsl:with-param name="UrlColumnName" select="'LinkUrl'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="EmployeeDesignation">
<xsl:value-of select="@EmployeeDesignation" />
</xsl:variable>
<xsl:variable name="Birthday">
<xsl:value-of select="@Birthday" />
</xsl:variable>
<xsl:variable name="dateTimeBirthday" select="ddwrt:FormatDate(string($Birthday), 1033, 3)" />
<xsl:variable name="dateOfBirthday" select="substring-before(substring-after($dateTimeBirthday, ', '), ', ')"
/>
<xsl:variable name="monthOfBirthday" select="substring-before($dateOfBirthday, ' ')" />
<xsl:variable name="yearOfBirthday" select="substring-after(substring-after($dateTimeBirthday, ', '), ',
')" />
<xsl:variable name="TodaysDateOfBirthday">
<xsl:value-of select="ddwrt:FormatDate(string(ddwrt:Today()), 1033,3)"/>
</xsl:variable>
<xsl:variable name="TodaysDateOfBirthdayyy" select="substring-before(substring-after($TodaysDateOfBirthday, ',
'), ', ')" />
<xsl:variable name="TodaysmonthOfBirthday" select="substring-before($TodaysDateOfBirthdayyy, ' ')" />
<xsl:variable name="TodaysyearOfBirthday" select="substring-after(substring-after($TodaysDateOfBirthday,
', '), ', ')" />
<xsl:if test="($dateOfBirthday)=($TodaysDateOfBirthdayyy)">
<xsl:if test="($monthOfBirthday)=($TodaysmonthOfBirthday)">
<div>
<div>
</div>
</div>
<table width="100%">
<tr width="100%">
<td width="80%">
<table>
<tr>
<td><b><xsl:value-of select="$DisplayTitle"/></b></td>
</tr>
<tr>
<td> <xsl:value-of select="$EmployeeDesignation"/>
</td>
</tr>
</table>
</td>
<td width="20%">
<table>
<tr>
<td valign="top">
<img width="60" height="60" src="{$SafeImageUrl}" alt="{@ImageUrlAltText}" title="{@ImageUrlAltText}" />
</td>
</tr>
</table>
</td>
</tr>
</table>
</xsl:if>
</xsl:if>
</xsl:template>Hi,
Based on your example above, which columns / variables are not appearing when editing the CQWP that you want to bind managed properties / list columns to?
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield -
Approvers are not displaying after Saving the SC and re opening SRM 7.0 PCW
Hi All,
We have implemented PCW SRM7.0 SC workflow, where we have implemented to ES - /SAPSRM/BD_WF_PROCESS & /SAPSRM/BD_WF_AGENTS ....
When we are saving any SC and re opening it further then it is not determining any approvers. when I debugged then found that Agents badi implementations are not getting triggered n Due to it no agents are showing up..
Can any one suggest any inputs on this.
Thanks
DevrajHello Nevaeen;
Thank you for the comments. The problem was a erratic logic in a Z level of approval.
Here is what I done:
My requirement was to validate the total value of each line item of the SC and trigger a second step of approval if it exceeded a predefined amount. As you mentioned, the standard BRF's only consider total value of the SC and not the value per line item. I copied the Badi implementation of RR_MANAGER_OF_MANAGER as well since we needed the approver to be the manager of the previous approver level and in the method GET_AREA_TO ITEM_MAP I worked up the logic we needed. For the first level of approver additionally of the mentioned method i had to re-write the method get_responsible_approvers of a Z class ZCL_WF_AREA_MANAGER (Copy of /SAPSRM/CL_WF_AREA_MANAGER) to get the approver information of the ECC system and in the method GET_AREA_TO ITEM_MAP i split the area of responsibility according to the account assignment ( so it was 1 badi implementation for each level of approval).
Kind regards
Cristian R. -
Toolbar icons are not displaying, After upgraded to Acrobat 9.4
Hi All,
We have developed one tool using Acrobat javascript and C++ plugin. It is very well working in Acrobat 9. But after my acrobat is upgraded to 9.4 version. some icons in the toolbar is found missing. I am unable to find the reason behind dissappearing of icons in toolbar. please provide a solution for this problem, The problem continues in Acrobat 7 too , when try to install my tool into it. Is their any specific coding standards or syntactic constructs to be followed for specific versions. Please help me in this regard.I found the solution, We need to change
some coding style by giving conditions for particular version , foe example we should make changes in color initialisation. Insteatof color.red , use [RGB,1,0,0] and many......... -
Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?
Hi,
I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
METHODS:
display IMPORTING l_table TYPE string
l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
DATA: gr_table TYPE REF TO cl_salv_table.
DATA: gr_columns TYPE REF TO cl_salv_columns_table,
gr_column TYPE REF TO cl_salv_column_table,
ls_fcat TYPE slis_fieldcat_alv.
DATA: gr_display TYPE REF TO cl_salv_display_settings.
DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
l_field TYPE string.
FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
<ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
ASSIGN (l_table) TO <fs_table>.
ASSIGN (l_fcat) TO <ft_fcat>.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = <fs_table> ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
Add basic default functionality in the ALV report
Functions
l_o_functions = gr_table->get_functions( ).
l_o_functions->set_all( abap_true ).
gr_columns = gr_table->get_columns( ).
gr_columns->set_headers_visible( abap_true ).
Display the list
gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
get_storecodes USING p_stfile
CHANGING it_t001w,
fetching mard data
read_mard_data,
preparing fieldcatalog for Final Data
create_filedcat USING it_t001w
it_site
CHANGING it_fieldcat,
preparing structure & internal table for Final Data
create_final_table_structure USING it_fieldcat,
prepare output data
prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
display_data USING l_table
l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = lt_raw
i_filename = p_p_stfile
TABLES
i_tab_converted_data = p_it_t001w[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
l_index = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = <fs_t001w>-werks
IMPORTING
output = <fs_t001w>-werks.
MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
append site to ranges
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = <fs_t001w>-werks.
APPEND rs_site TO rt_site.
CONTINUE.
ENDIF.
ENDLOOP.
SORT p_it_t001w BY werks.
SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
p_it_site LIKE it_site[]
CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
'MTBEZ' 'CHAR' '25' ,
'MATKL' 'CHAR' '6' ,
'WGBEZ' 'CHAR' '20' ,
'MATNR' 'CHAR' '18' ,
'MAKTX' 'CHAR' '30' ,
l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
'Divsion Description',
'MC Code',
'MC Description',
'Article',
'Article Description',
l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
<fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
CLEAR : l_fieldname, rs_site.
l_fieldname = <fs_site>-werks.
prepare fieldcatalog
PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
create header for excel
PERFORM create_excel_header USING l_fieldname .
CONTINUE.
ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
p_datatype TYPE datatype_d
p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
l_werks LIKE g_werks,
l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
l_index = sy-tabix.
IF l_matnr IS INITIAL.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSEIF l_matnr <> <fs_mard>-matnr.
APPEND <fs_final> TO <ft_final>.
CLEAR l_matnr.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSE.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
ENDIF.
IF l_index = g_lines.
APPEND <fs_final> TO <ft_final>.
ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
<fs_t023t> LIKE LINE OF it_t023t,
<fs_t134t> LIKE LINE OF it_t134t,
<fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-mtart.
ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-matkl.
READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_makt>-maktx.
ENDIF.
READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t023t>-wgbez.
ENDIF.
READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t134t>-mtbez.
ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
text
FORM display_data USING p_l_table
p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
l_fcat = p_l_fcat ).
ENDFORM. " display_dataI don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
call method set_colname
EXPORTING iv_tab = alv_tab
iv_colid = 'xxxx' "fieldname from the table
iv_stxt = text-t54
iv_mtxt = text-t55
iv_ltxt = text-t55.
METHOD set_colname .
data:
alv_cols type REF TO cl_salv_columns_table,
alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
IF iv_stxt <> ''.
CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
ENDIF.
IF iv_mtxt <> ''.
CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
ENDIF.
IF iv_ltxt <> ''.
CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
ENDIF.
CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname -
Windows 8.1 modern shortcut icons are not displayed in taskbar after domain join
Hello,
Like the title says: modern (metro) shortcut icons in taskbar are not displayed after domain join. There's just blank space where the icon should be for Store, OneDrive etc. Shortcuts work for classic and 3rd part applications.
Shortcut icons work properly if I log in with local account. The applications work properly whether the icons are displayed or not for every user (local and domain).Hi,
Since this issue only happened for domain account, I suggest you check whether there're some GPOs\logon scripts applied to the domain accounts which controls the taskbar icons.
Have you tried to unpin the modern taskbar icons and re-pin the icons to the taskbar? What is the result?
Yolanda Zhu
TechNet Community Support -
COOIS- Report Grid Value not displaying
Hi Experts,
In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category are showing null values.
initial screen,
Report
but production order contains grid values.
any one guide me to resolve it.
Regards,
Thangam.P
Message was edited by: Thangam PerumalHi ,
my requirement is need to show the grid value and stock category of AFS production order based on item details. i think that alv reports is working based on view. it is possible to add custom view for that report? . if possible mean to any one guide me to fix the problem.
Regards,
Thangam.P -
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Enabled UDF's are not displaying in XL Report Composer.
Hi,
I Enabled User Defined Fields (UDF) under manage user defined fields. But itu2019s displaying only Light dimensionu2018s fields. But Dimension attributeu2019s fields are not displaying in XL Report composer. How we can display Dimension attribute fields in XL Report.
Regds,
Sampath Kumar.Hi,Danie Posthumus
First of all we are not able to see my User define filed in report composer except for light dimensions type. Only we are getting Light Dimension Data Item type only we are not getting Dimension Attribute Data item type.
Regds,
Sampath Kumar Devunuri.
Maybe you are looking for
-
Append Extra Slash for Application Request through OHS
Hello All, I am writing to request your help on the following blocking issue : In my attempt to configure End-End SSL between Browser->OHS Plugin->SSL Weblogic Managed Server , Weblogic is giving me an incorrect response while constructing the absolu
-
IPhoto Doesn't Print Full Image
Odd problem here. I'm having trouble printing my images at 100%. For some reason that I haven't been able to troubleshoot, when I try to print an image from iPhoto, I lose a half inch or more of the photo around the edges. This happens whether I choo
-
T60-2623-D​6U Screen reddish for a few seconds when activated
In the last couple of weeks, I've noticed that my LCD is noticably reddish when first activated, returning to normal hue within 15 seconds or so. Based on my research I assume that either the lamp or the inverter is about to go. What I would like t
-
How to write data at the end of doc in reverse order?[CS6-jsx]
I need to move all my spec texts entries at et end of doc. To keep correct reference in all found entries i have to process in reverse order for (i = mFound.length-1; i>=0; i--){ ...etc but can't to think up, how to place entries in write order at th
-
SIEM integration, Automation possibilities in DirectAccess
For DirectAccess in Windows Server 2012 R2. 1. Can DirectAccess trace logs and other event logs be integrated with third-party SIEM tools? If yes, which third-party tools are supported? Please explain how integration is done? 2. Does DirectAccess su