Report help required

hai all,
i had a requirement where i have to place reports in one report.
is it possible to do it
if so what r the prerequistes
thanks in advance
Rgds,
Ravindra.

Hi Ravindra,
Place the cursor where you want to insert the query and then do the Insert!
Yes. Workbook has properties. After query is added, just right click on any part of the query and select 'Properties'. Note that these properties are specific to BEX.
Regards,
Sree

Similar Messages

Shopping cart analysis report - help required.

Hi Frendz,
i have a following requirement:
to analyze the time taken by Purchasing department to process the shoppin carts from the time it is received by procurement team to time it is approved or rejected.
Fileds we are considering are:
Shopping Cart,
Route,
Requisitioner,
Material Group,
Document Type
Please let me know which datasource suits this requirement with all the above mentioned fields.
Thanks in advance.
Sasi

Hi ,
It seems like Sales data.
Please check if E1_VBKV_1, E1_VBKV_2 data source are useful.
Hope it helps.
Regards,
Tulasi

Master (Multi Records) Detail Report (Help Required)

We need Help for Master Detail Report that returns information for all departments and their employees. e.g.
Page-1
master Record: Accounts Depts Detail
Detail Record: Accounts Empoyees Detail
Page-2
Master: Department-2 Detail
Detail: Department-2 Employees Detail
We are using Apex3.1
Best Regards
Jazib

Hi,
Changing the Detail part of the page to show all employees in all departments for a city wouldn't be too difficult. The main issue, I think, would be the page structure as, presumably would need to create new departments somewhere and, perhaps, add employees directly into that department?
For example, if you have a DEPT/EMP master/detail pair of pages, when you click on a department on the report page, the top of the form page would show the department you have selected rather than the city for that department. You could change this to show the city instead, but where would you create new departments?
Assuming that you can work through that, I should be able to explain how to have a detail form that handles multiple departments.
Andy

Want to change standard iw72 report. help require.

IW72 - sap standard report. to dispaly service order details
I want to display SalesOrder no. in IW72.
Please give me the link between sale order and service order.

hi,
i got d link. now this thread is closed.

Web reporting help required

hai BW gurus,
   can some body tell how to go about deactivating the exort to CSV file and export to MS excell in the tool bar of the web applications.
    thanks in advance.
Rgds,
Ravindra.

Hi,
this depends which default template you are using
BW 3.0 (0QUERY_TEMPLATE):
Please follow instructions in
http://help.sap.com/saphelp_bw33/helpdata/en/45/685b3ebd564644e10000000a114084/frameset.htm
Create a copy of 0QUERY_TEMPLATE and use the functionality upload and download from server. Do not edit directly in WAD.
In the document find the "Display Export Excel" Comment and "Display Export CSV" Comment, and delete or comment those td tags.
Then make your template the new default template.
In BW 3.5 with 0ADHOC the procedure is quite the same, but you have to copy 2 templates 0ADHOC and 0ADHOC_TABLE.
In 0ADHOC_TABLE find also the same Comments and delete or comment the following area. Save the template under a new name.
In 0ADHOC search for 0ADHOC_TABLE. Should be somehow look like
    <param name="TEMPLATE_ID" value="0ADHOC_TABLE"/>
         ITEM:            GR1Toolbar
and change 0ADHOC_TABLE to your template name.
Save this template to a new name and set it as default template (see link above).
Heike

"Oracle SQL Developer Data Modeler reporting repository required"

Hi all,
Trying to make use of Data Modeler Reports from within SQL Dev EA 2.1, but every time I try to connect to a DB I get the following message "Oracle SQL Developer Data Modeler reporting repository required."
Any idea how to go about sorting this out?
Thanks

Hi i have the Oracle SQL Developer Data Modeler version 2.0.0 installed.
When i try to export one diagram to the reporting schema, i get the following error : "Error occurred while exporting to Reporting Schema.See the log file for details".
The log file has no errors.
The repository owner is DBA.
The connection is ok.
Can you help me?
Thanks in advance
Paolo.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Summary Report help

Although my summary report indicates the total responses received for comments, it does not show the actual comments. I used a forms central template, perfect for what I need, however I really need the comments to be visable in the report. help please.

Can you please send me screenshot with the problem ([email protected]) so i can understand the problem better.
Currently the Summary Report tab only show fields added in the Design tab, so if you've added comments field directly in the Response tab you would not be able to display in the Report tab.
But you should be to see all comments in the View Response tab.
Thanks
Roman

(Invoice aging report = Cash Requirement Report)

hi,
The total balance for cash requirement report for specific supplier not match with the balance for Invoice aging Report also for specific supplier
The expected behavior:
It must to match the balance between the two reports
(Invoice aging report = Cash Requirement Report)
But this not happen when I compare the balances between the report’s
Kindly , Advise .
Thanks

Hello.
The Invoice Aging Report shows unpaid invoices, which may be not due yet. Use the Cash Requirement Report to forecast your immediate cash needs for invoice payments.
Octavio

Report in required currency - positions that are reported in TPM12

Hi,
User is looking for a report that will convert balances in original currency to a currency specified by the user based on the u201CMu201D rate for the u201Cas ofu201D (key date) date of the report. Basically they are referring to TPM12/TMR1 and would like to see the positions converted to whichever currency they would like to. I am looking to execute some of the standard transactions that report positions, like, TIS1 (Overview positions), S_ALN_01001154 - Simulated Valuation, etc., but couldn't find the output converted in the currency given in Display currency / Evaluation Currency in the input screen.
Experts, can you through some light on this and tell if there is any such report?
Let me know if you need any further info.
Kumar

Hi Prasad,
Thanks for your prompt reply. First of all, we are looking at if there is any standard transaction that will give the report as required. The client is not interested to use SAP query as there are some authorization problems to transactions SQ01, SQ02, etc. None of the user have access to these transactions.
If standard report is not meeting the requirement we may need to for customer development. But before doing that I am trying to find out if it is possible in any of the existing standard reports.
thanks,
Kumar

Report help required

Similar Messages

Maybe you are looking for