[REPORT][How to run a report in background?]

Hi there!
I'm with a problem here. How do I make a report run background always, without the interaction of the user to select this type of execution?
Thanks in advance.

Hi
U can create a new report to run it in background mode:
- Open the job
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            JOBNAME          = VA_JOBNAME
       IMPORTING
            JOBCOUNT         = VN_JOBCOUNT
       EXCEPTIONS
            CANT_CREATE_JOB = 1
            INVALID_JOB_DATA = 2
            JOBNAME_MISSING = 3
            OTHERS           = 4.
- Run the report
    SUBMIT <REPORT>   USER SY-UNAME
                      VIA JOB VA_JOBNAME NUMBER VN_JOBCOUNT
                      WITH ....... = .......
                      WITH ....... = ........ AND RETURN.
- Close the job
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            JOBCOUNT             = VN_JOBCOUNT
            JOBNAME              = VA_JOBNAME
            STRTIMMED            = 'X' " start immediatly
       EXCEPTIONS
            CANT_START_IMMEDIATE = 1
            INVALID_STARTDATE    = 2
            JOBNAME_MISSING      = 3
            JOB_CLOSE_FAILED     = 4
            JOB_NOSTEPS          = 5
            JOB_NOTEX            = 6
            LOCK_FAILED          = 7
            OTHERS               = 8.
Or you create a periodic job by SM36
Max

Similar Messages

How to Run a Report automatically in Background for every night

Hi,
How to run a report program in Background automatically for every nigh.
Thanks
Ramesh

Hi Ramesh,
You can use SM36 and use the "Job Wizard" to define a background job in simple step by step procedure
Or
Goto SM37 and specify a job name.
Next specify the ABAP Program Name of the report you want to execute under Job Step.
Then click on "Extended Job Selection" and goto the Period Tab.
There select "Only Periodic Jobs" and then specify the frequency of execution based on Months, Weeks, Days, Hours or Minutes.
Hope this helps,
Regards,
Madhur
Message was edited by: Madhur Chopra

How to run a report in back ground

how to run a report in background with out using job open, submit , close is there any other function module to run report in background.

Hi,
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
L_RELEASE(1) TYPE c.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = 'ZTEMP2'
IMPORTING
JOBCOUNT = P_JOBCNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH DESTINATION = 'HPMISPRT'
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X' AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = P_JOBCNT
JOBNAME = 'ZTEMP2'
STRTIMMED = 'X'
PRDMINS = 15
IMPORTING
JOB_WAS_RELEASED = L_RELEASE
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope the above helps you.
<b>Reward points</b>
REGARDS

How to run a report from oracle 10g form in .csv format

dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..

i have already tried.
but the report show in htm or html format. that file will not save into csv. please help.

How to run a report in form 10g

How to run a report in form 10g;

RUN_REPORT_OBJECT - check the on line help and there is a great paper on otn.oracle.com/products/forms and click on 9i papers (it will be relevant for 10g as well)>
Regards
Grant Ronald
Forms Product Management

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

How to run a report in SAP

hi sap gurus
can anybody tell me about how to run a report in sap (ABAP). what is the TCode for that one.while i am trying to post asset master it is asking to start a report first and then post. kindly reply me soon
thanx in advance

Hi,
- normal ABAP reports are executed by a TCode or SE38
- reports relating to assets are located at SPRO-Info Systems-Accounting-Fixed Assets
Rgds.

How to run the report RM07CUFA?

How to run the report RM07CUFA?

Go to SE38 and enter RM07CUFA and click execute.
in the next screen enter details for
Movement Type
Special Stock Indicator
Company Code
G/L Account
and execute.
If you have any inconsistency with fields that will be shown with red colour..

How to run OBIEE Reports in Multi-Org Environment?

How to run OBIEE Reports in Multi-Org Environment of EBS.

hi Rainer,
My Forms and Reports Server is in Same System only. Actually i am giving this path
http://vagee.ail/reports/rwservlet?
server=rep_vagee_oracle10g_apps_server&report=D:\FP2
\dealer_reports\oc_dealer.rep&userid=fp2/fp2erp@info
&destype=cache&desformat=pdf&ODSNO=OC0809/00110&branch=DLR002
In My AS System Running Successfully. But Client systems Page cannot be display message is displaying.
but generally i m able to access the reports server using this path
http://vagee.ail/reports/rwservlet?
then Reports server page is displaying but
when i specify that report server name
http://vagee.ail/reports/rwservlet?server=rep_vagee_oracle10g_apps_server
page cannot be displayed.
what will be the problem. please help me. thank you.
Regards,
Kalyan.

How can run the report SAP_INFOCUBE_DESIGN?

hI gURUS
To know about the DIM Table size
How can run the report SAP_INFOCUBE_DESIGN?
Thanks
Cheers
Durai

Function (se37):
RSDEW_INFOCUBE_DESIGNS
Try to see/run this function in order
to get statistic about one InfoCube
How to determine the size of DIM?
From this Function u can determine
how many rows in DIM u have.
After this u can determine size of DIM table:
ROWS * (How many Bytes are in one row) = Size of table.
In order to determine how many Bytes are in one row,
u can see transaction se11 -> Database table -> Tabkle name of DIM -> Display -> Fields -> just add the length*Bytes for all fields in this table.
BR

How to run a job in background programatically after 10 sec

Hi Forum,
Can anyone tell me How to run a job in background programatically after 10 sec..
Thanks in advance

Hi,
Here is the example code
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
* Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum    " You need to give the Date for execution the Job
            sdlstrttm        = sy-uzeit    " You need to give the Time for execution the Job
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
* Insert process into job
SUBMIT zreport and return
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
* Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.
Regards
Sudheer

How to run form in the background from command line

please can anybody tell me to
how to run form in the background from command line
vishal

Ummm....Oracle Forms is a foreground runtime kind of thing. What you want is a database procedure (or an OS utility - it depends on what sort of processing you want to do in the background).
Cheers, APC

How to run a scene in background in javafx

How to run a scene in background in javafx?

Can you explain better your objective?
Because all your scenes vars will be loaded when your app run. The scene is a visual artifact and running it in background could not be usual
Regards

How to run GR55 reports in background for cost center hierarchies

1. I have been asked by our users to create batch jobs to run in the background for some GR55 reports, that can then be sent directly to cost center managers via email.
I have figured out the process to do this as long as the cost center manager only needs to see a single cost center at a time. However, if they are in charge of multiple cost centers, we also want to send them a summarized report using the hierarchy we have set up. I can't seem to make this work, as the job only seem to recognize the last cost center in the group and the report is for that cost center.
Example. cost centers 100, 200 and 300 belong to hierarchy abc. If I run the job just for cost center 100 it is fine. But if I have a variant to run hierarchy abc, or even if I use the range 100 to 300, all I get is a report for cost center 300.
We cannot use BW because we only have revenue in BW. I am being asked to make this work from standard R/3 within the GR55 realm of reporting.
2. In addition, the report selection criteria includes two separate plan/forecast versions. They need to update these each month prior to running the reports and sending them out. I looked at the variables associated with the versions and tried to set them up with default values that I hoped would update automatically so that they don't have to manually change 50 or so variants each month. But I don't see any dynamic variables that I can use to have the system make that change without going into each variant individually.
3. There is another piece to this equation as well. There is another report they want sent out in batch, but it is several pages wide in SAP and several pages long. So when you run it in batch and either spool it or get it sent as an email, it is very ugly in the formatting due to all the page splits horizontally and vertically. If anyone knows how to get the report to stay together like it would if you had excel integration turned on, it would be very helpful. I have tried running it with that integration turned on, but the jobs are set up with user batch_mgr and not my id, so it isn't working well. The batch_mgr id is just a system id, not a dialog id. We also don't want the jobs set up with a regular user id because if people leave, then the jobs all need to be changed.

Kim,
I may have options for issues 1 and 2. In case of 3, what I can tell you is I understand the concern, but this is what typically happens in some standard CO reports that are not ALV compatible, I don't think there is not much there to do unless you add some custom code for the output.
In regards to point 1, yes, I have noticed that this happens in some standard and custom reporting, not sure what is going on. I came up with a work around that made the trick for my client in a similar scenario; which is editing the cost center groups. For instance, instead of having the group set as a range from 100 to 300, the groups are have listed the cost centers, 100, 200 and 300. Obviously, the disadvantage of this option is that it would require a bit of more cost center group maintenance.
In regards to point 2, I understand from your note that your users already have set up selection variants for the report. One option for you is to get the help from a developer to create a custom period variable and tiny program that runs in batch every month that would update that variable accordingly. Once that's done, you may have to update at least once, the selection variant attributes to change the period to a selection variable, so everytime from that point of time forward that the variable gets updated, it will be ready with the right value for every selection variant that uses it.
Hope this helps.
GG

How to run AR report ALR_87012167 in background

Hi,
I want to run a background job to print report ALR_8712167 to paper. This report is different than
what I have seen usually in that you just choose 'Program -> execute in background'. This is a
report tree in which the report data is populated by a background job (which is setup by tran FDIB).
Has anyone needed and succeeded in doing something like this?
Thanks,
Debbie

Post Author: V361
CA Forum: General
I have CR XI Randy, if I understand the question, you should be able to add a command to your report, go to database expert, and add a datasource, select command, you can put your SQL in there. Then replace your existing database connection with the command.

[REPORT][How to run a report in background?]

Similar Messages

Maybe you are looking for