Report in MM for PO & PR with date

HI,
Can you tell me any report in MM where we can get PO and PR with their creation date..
Thansk,
Dharmveer

hi,
you can say document date as creation date..
You can get it differently but not combined anywhere...
this might be because one is internal doc(PR) and other is external doc(PO)...
You can do one thing...Create your own SQVI query joining table EBAN, EKKO etc...
Regards
Priyanka.P

Similar Messages

  • Implement check for File Names with data into TRG table

    hi,
    I am trying to load the Multiple files names & Autonumber to oracle table T1 which is further loaded the auto-number with data to target table TRG. My problem is when the same name file comes again due to size then load it again. & also don't insert Target (TRG) table rows with same data while insert the only those records/rows which are not in Target Table(TRG) .. Is this standard approach. becoz in this way I thing loading Performance speed will b down??
    Any other or best recommended approach???/
    Thanks
    Regards,
    AMSIII
    Edited by: AMSI on Dec 11, 2012 9:54 PM

    Hey Jason,
    Create a validation of type exists. in expression 1 put:
    SELECT 1
    FROM DUAL
    WHERE UPPER(:P9_FILE) LIKE '%TEST.HTML';
    {code}
    change P9_FILE to your file browse item name and change '%TEST.HTML' to '%YOUR_FILE_NAME'
    Hope this helps,
    Tyson                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Report and ready for input Query, with similar shadings are confusing

    Some customers mix report and planning queries in their templates.
    usually the shades for PLAN Queries are
    o white - ready vor input
    o blue- display data (e.g. LY, calc KPI)
    In a Query with NO INPUT ready Cells the query has a zebra shading, blue and white, row by row.
    That is confusion for users if they believe every Number on a white background can be changed.
    Is it possible to change the shading for reporting queries to blue only?
    Best Regards,
    Georg

    Hi.
    You can cancel zebra by setting off for ALTERNATE_STYLES in properties if analysis item in WAD, BUT it sets all cells as WHITE and not blue.
    I dont know how it will be usefull, but you may try ...
    Regards.

  • ABAP reports or BSPs for publishing R/3 data to Enterprise Portal

    Dear Friends,
      We have got scenario where we need develop a product.As part of that we have got some data in SAP R/3 that need to be published through Enterprise Portal.
    Before me there are the below options.
    1.To write ABAP reports and publish with the help of ITS.
    2.To go for BSPs.(understood WAS should be > 6.10 )
    3.To write some BAPIs and build the interface using portal as middleware.
    Pl. suggest me which one would be best option considering If the reports contain some graphs also.
    Your suggestions are greatly appreciated.
    Thanks in advance
    Mrutyunjay

    Thanks Gopi for your inputs,
    But I heard graphs in ABAP are very resource intensive.
    I would request to through some light on presenting the data graphically through EP if the data is collected through BAPIs from SAP R/3.
    Thanks in advance.
    regards
    Mrutyunjay

  • Problem creating cache group for a table with data type varchar2(1800 CHAR)

    Hi,
    I am using TimesTen 7.0 with Oracle 10.2.0.4 server. While creating Cache Group for one of my table I'm getting the following error.
    5121: Non-standard type mapping for column TICKET.DESCRIPTION, cache operations are restricted
    5168: Restricted cache groups are deprecated
    5126: A system managed cache group cannot contain non-standard column type mapping
    The command failed.
    One of my filed type in oracle table is Varchar2(1800 CHAR). If I change the filed size to <=1000 it (E.g. Varchar2(1000 CHAR)) then the Create Cache command works fine.
    MyDatabase Character Set is UTF8.
    Is it possible to solve without changing the filed size in the Oracle Table?
    Request your help on this.
    Thanks,
    Sunil

    Hi Chris.
    The TimesTen server and the Oracle Client is installed on a 32-bit system.
    1. ttVersion
    TimesTen Release 7.0.5.0.0 (32 bit Linux/x86) (timesten122:17000) 2008-04-04T00:09:04Z
    Instance admin: root
    Instance home directory: /appl/TimesTen/timesten122
    Daemon home directory: /var/TimesTen/timesten122
    Access control enabled.
    2. Oracle DB details
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    CORE 10.2.0.3.0 Production
    TNS for Linux: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Oracle Client - Oracle Client 10.2.0.4 running in a 32 bit Linux/x86
    3. ODBC Details
    Driver=/appl/TimesTen/timesten122/lib/libtten.so
    DataStore=/var/TimesTen/data
    PermSize=1700
    TempSize=244
    PassThrough=2
    UID=testuser
    OracleId=oraclenetservice
    OraclePwd=testpwd
    DatabaseCharacterSet=UTF8
    Thanks,
    Sunil

  • Export for Apple TV with Date?

    I have over 70 home movies dating back to 1952 in the latest version of Final Cut Studio that I want to export to Apple TV and I need the title and date (year) to be displayed. I cannot get the date to show up in Apple TV reliably.
    I export from Final Cut Studio using Share and then Send to Compressor where I use a custom Apple TV setting which just exports in SD without any audio. The resulting m4v file is imported into iTunes and viewable with Apple TV. On Apple TV the title shows up for each movie but no date (release date?) is listed. Since these movies date back to 1952 I want to have the date displayed (I don't want to include it in the title text).
    I have set the year in iTunes, can't find out how to set the date in Compressor, set the date with MetaX, Lostify, etc., but the date never shows up on Apple TV.
    I have searched these forums and the internet but have not found a solution that works. Can anybody offer any suggestion on how to reliably set the date?

    Hey Jeff, I realized that you've marked this thread Answered but, in case it matters, the issue with retagging files already imported into iTunes is a known issue (For whatever reason, the iTunes Library Database file doesn't update the metadata when a file is retagged externally.)
    What many of us (iTunes nerds) do is delete the file from our iTunes library, retag externally, then Add to Library in iTunes.
    That's the most foolproof way, though sometimes after retagging externally (and not having removed beforehand) a simple Get Info in iTunes does the trick. But that fails a lot for me personally.

  • N8 Mail for Exchange – problems with date separato...

    key points are highlighted by bold text
    Hi,
    I'm using my Nokia N8-00 for one month now and everything works fine except three issues I discovered using Mail for Exchange. Two weeks ago I contacted our domain/mail hoster to set up a MS Exchange account for me.
    Setting up the account on my N8-00 worked as expected, but after a detailed look I found some problems concerning the date separator (normally set in the settings of the clock-application) and the synchronizing of anniversaries.
    To be sure the sources of the problems are not produced by the server I set up the Mail for Exchange (newest available version of Mail for Exchange via Ovi-Store – 3.00(50)) account on my N82. Comparisons to my N82 are mentioned below.
    My first problem with Mail for Exchange on my N8 is that the date separator is switched from . (point) to – (minus) automatically. I'm pretty sure this issue depends on the N8’s Mail for Exchange, cause it only happens in the peak-time (off-peak is set to sync manually). The strange thing is that I cannot trace back this occurrence – it just happens randomly in the peak-period.
    On my N82 this problem doesn’t occur. Additionally the support employee at my mail hoster told me he is using an E-Series (Mail for Exchange 2.07) device without having this issue.
    Is there a workaround or a fix coming for this issue? Is there anybody else having this issue?
    Now coming to the second issue I sustain using Mail for Exchange on the N8-00. Some of my contacts that are synced to my device get the wrong date of birth displayed in the device. Upon contacts where this problem occurs the date of birth is displayed one day earlier than set in Outlook.
    I found out that this issue only happens to contacts born prior to 198* (* between 1 to 4 – sorry not sure about the exact date). One example is the date 02.10.1978, which is displayed as 01.10.1978 in my phone. Even if I set up a new test-contact with this date of birth it is displayed wrong in my phone!
    But it doesn’t happen to all birthdates prior to 198*. And also on this issue I’m not sure where it’s coming from.
    This problem doesn’t happen on my N82 and the E-Series device mentioned above.
    Last but not least the third issue which in a way is similar to the one above but doesn’t happen in the contacts application. Birthdays which are automatically entered as all-day-series in the calendar by Outlook aren’t synced to the device as birthday events (as Ovi-Suite does). Sometimes they aren’t even all-day events – they have a starting time at midnight and an end time at midnight the next day.
    If I change those events to real all-day-birthday-events in the calendar app of my N8-00 they are synced back to my Outlook one day prior to their real date – sounds familiar, huh?
    To be sure these issues are not produced by me in any curious way I made sure that every birthday-event in Outlook is an automatically entered event. Additionally I checked the time zones and the date-separator of Exchange via Outlook Web Access and on my phone – they are both set to GMT +1 and the date is set to dd.mm.yyyy.
    What makes me angry is that those issues don’t happen to my older device.
    Please help me to fix these problems!
    Greetings
    Lars

    I am having ongoing problems with Hotmail and my N8's Mail for Exchange. I have all the latest firmware updates from Nokia, that as I understand it was supposed to fix the problem, it hasn't. I've even done a hard reset on the phone, which lost a ton of stuff that my service provider had installed
    Hotmail via MfE works for a couple of days then stops connecting and refuses to update mail or calendar entries, I then delete the account and recreate it and it all works again for a couple of days. I know this isn't a problem with Hotmail as my Nokia 5800 works perfectly with its MfE.
    This is spoiling what is otherwise a good phone as it's a main feature for me as I use the calendar in Hotmail to organise my meetings etc.

  • Calender Sync for Iphone 3G with data from 2 seperate pc's

    Current situation:
    1 IPhone 3G where personal calender and personal contacts are synced via Itunes to my personal PC at home.
    Phone is working on my personal SIM card and is only for personal use...
    'Dream'-situation:
    As I now have 2 phones (1 personal Iphone and 1 Work mobile (nokia) this is what I want to do (but struggeling to get it to work...)
         1. I would switch the SIM cards and use the 'work' SIM card in my iphone (as my work would pay for the phone calls) and I can close the SIM account that i'm paying for - you know, crisis
         2. I would then like to add my 'work' calender from my 'work' pc via Itunes
         3. Then I would also like to add my 'work' contacts
    Now for my questions:
    I know for the calender you can have 2 'calenders'  - but can you also have 2 Contact-groups (similar to the calender accounts?
    Can I then sync the same Iphone with Itunes on my work pc (and only syncing the 'work' calender and/or contacts)?
    Can I then still sync the same iphone with Itunes on, my Home pc (and only sync the 'personal' calender and/or contacts?
    So in both situation, I would connect the Iphone via cable to the PC's (work or personal); but only want to synchronize specific calenders and/or contacts.
    Can I do this with the same apple ID
    And who can help me to set this up - as first trials, just erase everything 'personal' when syncing on the work pc...
    Thanks

    iTunes is not seeing device when connected. It simply freezes (Not Responding) for minutes then fails to see device.
    I have previously uninstalled and re-installed latest from Apple 10.2.2. The only way I got that to work was uninstall AMDS and install version 10.0.1 this worked beautifully for ONE Night only. I am now with 10.2.2 that takes 2-4 minutes to start (non responding half of that time the first half just not shown by task manager) and cannot see device. I tried starting iTunes with devices plugged in and same issues. Windows (Vista 32) does see iPhone.

  • Minimizing Downtime for OS patching with Data Guard

    Hi there,
    I'm trying to come up with a solution for a situation that will occur often, and I'm not entirely sure how to go about it. We don't have DG installed, but we will be implementing it very soon.
    We will have a primary and standby DB (both 11gR2 Enterprise Edition) setup with an observer for automatic server-side failover.
    Our team needs to perform operating system patches on both primary & standby systems every few months, but the 2 systems will not be patched at the same time. So they will patch one system on one day, then patch the other system on another day.
    When it comes time to patch the systems we would like to minimize the outage... In fact, I would like to have a situation where clients would be connected to the primary DB, while the standby is being patched, and then perform a switchover and then do it again on the other system - all without too much of an outage for the client (i.e. only the delay during the switchover)
    Would the following approach be valid for this type of scenario?
    1. stop application of redo to standby
    2. shut the standby database down
    3. team performs Operating System patching, etc.
    4. bring the standby system back up
    5. restart redo apply to standby - let it catch up to primary
    6. perform a switchover from primary to standby
    7. then we repeat steps 1-6, but on the new standby (i.e. the old primary DB)
    Is this approach valid? Or is it incorrect/impossible?
    If not, how do any of you handle scheduled outages for OS-level patching?

    Hello;
    This looks valid. Just a few months ago our Primary server room needed work and I did the same thing as you came up with. One small change is check they are in sync before step 1.
    One thing to watch is after you do a switchover make sure you can send a few logs and have them apply before you do the shutdown.
    Will check my notes but your plan looks the same as mine. Completely valid. I would do it again and again. I like to think of it as one database, but in different roles.
    In fact I moved a standby database to a different server using similar steps :
    1. On the primary database defer the standby destination.
    2. On the current standby cancel recovery and shutdown the database.
    3. Create database directories on the new server.
    4. Edit the tnsnames.ora file on the current primary and fix dest location
    5. Add tnsnames.ora and listener.ora to the new server.
    6. Move password and spfile files to the new server.
    7. Tnsping both servers
    8. Use scp to move the database to the new server.
    9. Restart recovery and check
    A little more complex but it worked the first time.
    Also had a power outage (planned) in the Standby server room just this last weekend, did "DEFER" on all the Primary's and then an "ENABLE" after the power came back. DG caught up in no time.
    Best Regards
    mseberg
    Later
    I checked my "post-morten" on this and I had two issues :
    1. One of the standby's did not have ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE; set and the Oracle forms application barked. ( Its was set on the Primary )
    2. Two of the databases gave "LOG SWITCH GAP" when I did : ( when I was about to switch back )
    select switchover_status from v$database;The logs returned this error : ( when I moved them and tried to regisiter )
    ORA-16089 archive log has already been registeredData Guard corrected itself after I forced a few log switches
    SQL>ALTER SYSTEM SWITCH LOGFILE;Two or three and then it all worked.
    The alert log had this :
    Clearing online redo logfile 1 complete
    Conclusion
    Issuing the ALTER SYSTEM SWITCH LOGFILE was needed for the "clearing" process on two of the three databases.
    This problem might be avoided by waiting after a switchover until several logs can be forced to the new standby. Otherwise before starting the switchover perform several log switches on the current primary.
    Edited by: mseberg on Jan 18, 2012 7:54 PM
    Edited by: mseberg on Jan 18, 2012 7:58 PM

  • How do I report a problem for purchases made with store credit. They do not appear in my purchase history.

    iTunes service *****.

    Click "Support" at the top of this page and then click the link under "Contact Us"

  • Formula for report to run with data of only current day

    I need a report that whenever refreshed it run with data for only the current day. It is for knowing how many checks were performed from the start of the current day to the time the report runs. Iu2019ve tried to use the select expert but I guess I need to use a formula in it.
    Thanks,
    Andreia

    Andreia,
    I think you've posted this into the wrong forum!
    -Anil

  • Is it possible for users to enter data on PDF forms?

    I would like to use Crystal Reports to generate a PDF form with data from database; I am experienced with that.
    Here's the question -- Many of the fields will be populated from my database, but I would like to leave some fields blank for the user to edit manually. (I do not expect these edits to update the database.) Is there a field or object I can insert to allow for these manual edits?
    I have seen this feature at my own benefits website. I can click on the PDF and enter some values in blank fields. It gives me a warning that the changes will only be shown when I print, not when I save.
    I have been unable to create this feature using Visual Studio 2005. Do I have to upgrade to 2008? Or do I have to upgrade my Crystal Report package in Visual Studio? Or is this feature not possible in Visual Studio?
    Any thoughts are most welcome.
    Edited by: John  Miedema on Sep 3, 2008 9:07 PM

    There are 3rd-party tools (see comprehensive list at http://www.kenhamady.com/bookmarks.html) that provide extra pdf functionality on top of the pdf export from Crystal. 
    In the case of my Visual CUT software, you can use hidden formulas inside your Crystal report to generate form fields (pre-populated as well as empty) as part of the pdf export process.
    hth,
    ido

  • PDF Creation with data from SAP system

    Hi All,
    I need to generate a PDF file using Adobe Document Service. The content of the PDF can be from any datasource (Oracle/ BW/ R3 ),  So I require Webdynpro code for pdf creation with data from any of the system

    Hi Deepak,
                     Before starting the code just like that,make sure u have configured all services in Visual Administrator.
    U can refer this:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/95/5a08cd0e274a0bae559622d6670722/frameset.htm">Configuration Guide</a>
    regards
    Sumit

  • HR -- adding year with date and month

    Hi all,
    Can any one let me know what is the logic for adding Year with date and month in HR.
    ex: 01.10.2008   from this date it should be 2 years.
    thnks
    joshi.

    Hi
    u can add days to the date directly ....
    if u have the date V_DATE of type sy-datum u can add directly number of days to get disired date ..
    v_date1 =  v_date + 365 .
    hope it helps ..........

  • Report Builder Wizard and Parameter Creation with values from other data source e.g. data set or views for non-IT users or Business Analysts

    Hi,
    "Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
    You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
    on TechNet. 
    I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
    Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
    I have SQL Server 2012 STD and Report Builder 3.0  and want to train non-technical users to create reports as per their need without asking to IT department.
    Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
    So how they can configure parameters based on Other data sets?
    Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
    a set of defined reports?
    I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
    So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know. 
    Many thanks and Kind Regards,
    For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323

    Hi Asam,
    If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
    query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
    http://msdn.microsoft.com/en-us/library/dd220464.aspx
    As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
    http://technet.microsoft.com/en-us/library/hh965699.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for