Report in payroll retro - urgent please
Hi Guys
In our this pay period i.e 6th period , some people retroed back to 1st pay period. Is there any way to create a report of employees to see who retroed back to 1st pay period in 6th pay period. WT reporter or payroll reconciliation does not help in this.
Does any one know? Please let me know
Tahnks
W.
Thanks Arun for your time. We can not do that because that date field in IT0003 has been changed for employees through another program for a different reason.
Just wondering is there is any way to get to the table ( do not know which table) where the details on payroll result clusters are stored. On the screen of Display Payroll Result, we have info like Payment date, For-Period, In-Period. Not sure if thisinfo is stored somewhere in Table. So is there a way to get this info? Any Idea?
Thanks
W.
Similar Messages
-
Percentage Rows in Report painter .. Urgent Please
Hi All,
I have rows where I need to calculate percentages, Can you please advise how to calculate.
Loong Hin Pang - I have seen you answering one related query. Can you please help me out.
Points for sure...
Regards,
Kiran.Thank you.
See I have the below Rows
Total Revenue
Cost2
Cost3
Direct Cost
Gross = Total revenue - Direct Cost
Gross % = (Gross/Total revenue ) * 100
I have Columns as with basic Key figures and Formulas
Year(basic key Figure)
Year+1(basic key Figure)
Total = Year + (Year+1)
Its giving me correct values in case of Basic Key figures and not in the formula case.
It giving error when there is formula both in Row and Column.
In the above case last row and last colum. Only Column formula is getting implemented.
Here for example I have mentioned 4 rows and 4 columns.. But I have 15 Rows and 30 columns .. out of which 15 rows and columns have formulas...
% Rows are problem.. which gives me errors... I tried using Special cells, but I am not 100% sure how to use them.
I would be very thankful if you can help me out.. Please -
How to hide Report's Parameter Form Urgent Please
Hello to All!
How we can hide Reports Parameter Form when we are calling a report from our form by using RUN_PRODUCT built in.<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Amir Sajjad ([email protected]):
Hello to All!
How we can hide Reports Parameter Form when we are calling a report from our form by using RUN_PRODUCT built in.<HR></BLOCKQUOTE>
Hi Amir!
You must add to your paramlist the following parameter:
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Bye -
REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP
Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
FerozThe way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun -
OTN TEAM Please respond-matrix reports row limitation(very urgent)
Hi ,
using with matrix reports for delimited reports what's the maxmimum row limitation for text and excel?
thanks in advance.
please advice asap.
thx in advance.See response in OTN TEAM Please respond-matrix reports row limitation(very urgent)
-
Filter in Bex Reports - Very Urgent, Please help!
Hi,
I have a report based on CRM transaction which has both header row and item row, the report also has filters like status and product, the status is the header level and product is at the item level, in which case the header row would not have the product details and item row would not have the Status Details. the records would be something like shown below
Transaction Number Status Product
1111111 Open
1111111 Product1
In which case the filter applied on status and product would not return the expected result for ex if filter "Status = Open" is specified then we would just get only the header row and if Filter "Product = Product1" is specified we would just get the detail row, if both the filters are applied we would not get any rows.
Is there any way to get both the header and item row if filters are specified, how such cases are implemented in Bex reports.
Thanks
Akila.RAkila,
please state your query result properly...
Transaction Number Status Product
1111111 Open
1111111 Product1
would look like
Transaction Number | Status | Product
11111111 | Open | #
11111111 | # | Product 1
22222222 | Closed | #
22222222 | # | Product 2
The issue being that you want say... Open transactions then the the result should be
Transaction Number | Status | Product
11111111 | Open | #
11111111 | # | Product 1
whereas you are getting
Transaction Number | Status | Product
11111111 | Open | #
and similarly for Product column as well....
Options :
1. It could be possible that your model is wrong -
2. Have the filter include # as well.... include # into the filter by default - ask the users to do the same
Arun
Hope it helps... -
Hi All,Please send me abap-hr material .Its urgent please.
Hi All,Please send me abap-hr material .Its urgent please.
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/sapfunc/index.htm
http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
http://www.sap-img.com/hr021.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sap-img.com/human/finding-the-list-of-hr-module-tables.htm
additional info......
Download the ABAP e-book for HR in the below link under the section 'Free ABAP eBook Download'
http://www.sap-img.com
Also have a look at the following links-
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://planetsap.com/index.htm
http://www.atomhr.com/library_full.htm
http://www.sap-basis-abap.com/saphr.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.sapfriends.com/sapstuff.html
http://www.atomhr.com/know_preview/Reading_Payroll_Results_with_ABAP.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Payroll
http://www.sap-press.com/product.cfm?account=&product=H967
http://www.sapdevelopment.co.uk/hr/payres_abap.htm
http://www.sapdevelopment.co.uk/hr/payres_tcode.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification -
Custom report on payroll and time evaluation results
Hello Experts,
My client would like to have a custom report on payroll and time evaluation results , can you please provide me with 2 options of achieving them.
Thanks,
RegiHi,
The time clusters are found using reports RPCLST*(B2, B1, PC etc) via SE38. You can find the time clusters under the time menu in the menu tree.
PCL1 - Database for HR work area
PCL2 - Accounting Results (time, travel expense and payroll);
The database table PCL2 contains the following data areas:
B2 time accounting results
CD cluster directory of the CD manager
PS generated schemas
PT texts for generated schemas
RX payroll accounting results/international
Rn payroll accounting results/country-specific ( n = HR country indicator )
ZL personal work schedule
Tto retrieve payroll results accesse SAP transaction PC_PAYRESULT for all countries.
Finally u can get the results for time PT_CLSTB2 , for Payroll PC_PAYRESULT. With this t.codes u can get the require results for ur custom report.
Regards,
Devi. -
0P_FYEAR issue - Urgent - Please help
Hi,
We are developing six new BCS queries. We have already have about 30 reports.
1. We are using the Fiscal Year variable (0FISCYEAR) - 0P_FYEAR in most of the queries. In the new reports, particularly in one query, the previous year is not working with -1 offset value. but, the same variable is working in other new reports for previous year. Please help how to rectify the issue.
2. I have started trying many options in QA environment and found that there was a option to choose CONSTANT SELECTION in the 0FISCYEAR. So, I tried to select the Constant selection and found that the PREVIOUS YEAR IS WORKING for the query, for which earlier it was not working. Now, my another issue is that previous year is not working for all other queries which we have used the 0P_FYEAR as variable.
Since I have tried this in QA, all the reports in QA are not working for previuos year. Please advise urgently to correct the same.
Thanks & Regards,Hi ,
Have you used Fiscal Yaer variant in your query?
When you use these variables you should restrict querieswith correct fiscal yaer Variant.
Jaya -
very urgent please.
some one make account on skype which is not belong to me , and put my mobile number and many people call me pleassse help me and till me how to hide my mobile number from this account which is not mine please help its avery urgent realy it disturb me
name on skype is vvvvvvvvvvvv525n this for person idont know and cheat using my mobile number
and you can check by calling me on the nubmer which not belong to account ownerlike what I mentioned above, you need to report this to the appropriate department. this is a user-to-user forum only, and users here (including the admins and mods) have very limited to users' account. they can't assist you regarding that case.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com -
Payroll (retro active payroll driver )
Hi experts,
How to get the previous payroll results from retro active payroll driver program.Please me let me know how to get the data from function module.
Thanks,
snikitha.You can use these functions to derive the retro results
CD_READ_PREVIOUS
CD_READ_PREVIOUS_ORIGINAL
CD_RETROCALC_PERIOD
Refer to documentation for further info.
Regards
Marcin -
FRM-10044 URGENT PLEASE PLEASE!!
FRM-10044 Can not create a file URGENT PLEASE!! Apr 16, 2003 12:19 PM
Reply
I installed Oracle 8i and Forms 6i in a pentium 4 changing the symcjit.dll -> symcjit.old.
Now I want to use the same scripts and Forms that I have saved using my old machine but I can't save new forms or update the old ones.
FRM 10044 Can not create the file
I can run the scripts in SQL.
Please Help me it is urgent.
I have installed and uninstalled the Data Base many times and I have read previous posts.
Thank you a lot.Hi,
"Cannot Create File" means forms failed to create/save the file. Check the following
* Do you have full access to the drive?
* Did you mark either the form or its directory as read only?
Regards,
Momen.
Hi Helena,
How are you? We are into Arabic development environment. I am trying to migrate from 6i (CS) to 9i (web). Everything went fine but when I run the report, the browser is displaying junk characters.
Did you experience this problem?
If you have any suggestions you can mail me on [email protected]
Regards,
Momen. -
BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR....
BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR.
The spa-3102 has the following two bugs.
When the unit sends a hook-flash to the fxo port it:
a) does not send the hook flash to the fxo port for PSTN Hook Flash Len: Instead it uses a very short pulse of about 100ms or 1/10 of a second. It should honor the PSTN Hook Flash Len configurable parameter of .2 – 1.5 seconds.
b) Does not change the line voltage from –7 (off-hook) to –48(on-hook) during a flash-hook to the fxo port. Instead it varies the voltage only by about 2.5 volts.
This was reported as early as June 07 to linksys support. It is reported they agreed and would fix in the next firmware release. There is info that firmware 5.2 being released and is this fix in 5.2 and how can I get it.Although the problem is still not solved, at least I now know WHY the problem is happening... and Apple's Firmware Update is NOT to blame!
Through a series of coincidences, I was actually lucky enough to get in touch with the engineers in Apple's Airport firmware division, and they were helping me to nail down this problem.
Turns out that Apple takes great PRIDE in the fact that they are one of the VERY FEW manufacturers who make routers that behave properly in this regards: they SPECIFICALLY test for their Airport Extreme routers to allow you to connect to servers behind the NAT by way of the public WAN IP address of the NAT box. This is the way that apparently the NAT/DHCP specification is SUPPOSED TO WORK! You're SUPPOSED to be able to connect this way, if you so desire.
So what was causing the problem on my network, then?
Something I hadn't thought about... the Vonage Linksys RTP300 router that we're using for our Vonage VoIP service. Turns out that this router does NOT support clients behind the NAT connecting to servers behind the NAT by way of the public WAN IP address.
Linksys is to blame, not Apple!
And apparently, this feature may have actually been working in an earlier
firmware update, but apparently, Vonage AUTOMATICALLY pushes firmware
updates to RTP300's, apparently without user notification:
<http://www.vonage.com/help.php?article=1066&category=90&nav=5>
And a forum thread on vonage-forums.com seems to indicate that the 1.00.60 firmware in the RTP300 started getting pushed to customer units on or before 1/26/06, making it less than a month after Apple shipped the 5.7 firmware update for AirPort Extreme Base Stations:
<http://www.vonage-forum.com/ftopic10915.html>. So if the problem cropped up then, it's possible that I accidentally attributed it to Apple when really the RTP300 got a firmware update around then too which may have broken this feature (assuming it was working before then).
Power Mac G4 QuickSilver Dual 800 MHz Mac OS X (10.4.4) -
urgent please: I have a new iphone 4S and while sync with itunes, it was not done using the data of my old iphone but with a new virgin iphone. how can I retrieve and sync with my old datas? through icloud? or have I lost everything? please help
to be more precise
I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
thank you very much -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Maybe you are looking for
-
I recently downloaded an album (a gift) from Amazon, one option of which is to download directly to my iTunes library (which is what I did). I also purchased a song from the iTunes store shortly after this. In both cases, the music shows up on my i
-
My operating system is windows vista. I update my Adobe plugins to be current. What else should I do?
-
Man power estimation for BW project
Hi, I am looking for standard document for manpower estimation of BW project. If any body has please send it [email protected] thanks Bala
-
My Podcast hoster is gone...so how do I update my podcast?
Greetings. My podcast was hosted thru rizz.net or blipmedia. I haven't updated in a while, but now it appears that rizz.net is gone. So: how can I add a new podcast to my "oeuvre" without starting an entirely new podcast and submitting to itunes for
-
Cancelling Account/Service
Hello all, How do I know that my account has been cancelled? I just got off the phone with a customer service rep and she told me my phone would be cancelled on 11/02.