Report in standard costs between RM , labour & OH
Dear Experts,
Need a report that lists all of our plants parts and breaks the part's standard cost down between raw material and labor/overhead costs.
Report that breaks down the the standard cost between raw material and labor/overhead costs
Thanks,
Bhaskar.
Dear Baskar,
Execute Report S_P99_41000111 for a material and plant combination ,cost component view 1and after executing click on
change layout(Control+F8) and select the fields,Machine Costs,Labour Cost,Overhead cost,Purchase material usage(raw
material's cost).
You can get the splitup costs in T Code CK13N,after entering the material,plant,costing variant press Enter and then press F5.
Regards
Mangalraj.S
Similar Messages
-
Analysis report for standard cost in CK33N
Hi,
Analysis report for standard cost
Using variant Z003 in CK11N.
Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
In CK33 you compare the 2011 cost for the product with the proposed cost for the next year. For some parts it works and for others it splits the lines, though the calculation is still correct.
Regards,
T.Harish KumarHi Revital,
I believe the last option is correct.
Thanks,
Gordon -
Difference in Price per unit and Standard cost between COPA and PCA
Hi
I did a comparison between COPA and PCA for January. For few products,there is a difference in the Standard cost and PPU between the two reports(product wise). What might possibly be the reason for the difference. And how to analyze the root cause of this difference.
Thanks
JaswanthHi
By PPU - Do you mean PUP i.e. Per Unit Price of Material Ledger??
If yes, then you are not comparing apple to apple.. Std cost is bound to be diff than actual cost
br, Ajay M -
hi all,
just wanted the transaction code for standard report for standard cost of material. ur answers are appreciated
thanks
sanjeevHi,
As far as I believe you can use MBEW table for getting these detials of standard price for a particular material.
For cost estimate CK13 N which is obviously for stanad cost.
Rg,
Vipul -
Report to list Standard cost by component
Hi,
Is there a report or transaction that I can run to list all current material standard costs (by plant) and broken down by the components (material,labour, processing, etc)
Thanks,
JogradTry - S_P99_41000111
-
Standard Cost Estimate Report Comparing Current vs Previous Year
Hi Everyone,
Is there a standard SAP report that would provide materials with previous and current year standard cost estimates as found within the Costing 2 view of the material master?
Thanks,
PeteHi,
You need to look into periodic reports. Here is the best one to provide the copmarision between two period -
S_ALR_87099932.
Go into the report & select the costing runs taken in two diffrent periods. You will get all the required results of prices for two periods/costing runs.
Regards,
Amol -
Standard Report for Materials Cost Component Structure - PO Condition Type
Dear experts,
We are using below cost component structure (CCS) for materials:
- Direct materials
- import duty
- import handling
In which, all those above CCS are achieved through below condition type in Purchasing Info Record. When doing the standard cost estimate through costing run, we have successfully grouped all those condition types into their respective CCS. The problem is, while executing the standard report of "result of costing run" (S_ALR_87099930), the sytem groups all those three CCS into CCS "Direct materials" only.
I have tried different standard layouts, but still got no way to show all those CCS separately in the standard report.
Please kindly suggest what approach should i take
Thank you very much
BR, Erwin
@edit
Solved.
Edited by: Erwin Hartono on Nov 16, 2011 9:16 AMHi
Check cost elements assigned to structure. For this go to transaction code OKTZ and select your CCS and double click on Assignment Cost Component-Cost element interval.
Srinivas -
Standard SAP Cost Report which captures costs incurred for replacementgoods
Hi Friends,
We want to track the costs related to the Replacement of goods sold free of charge and under warranty shipped to our customers. We are currently using the field "Usage" on the item level of the sales order.The item category created within the Sales Order is either ZST0 or ZMO0.
Unfortunately, I can't find any report in which the field "Usage" would be presented along the costs related to the item. The report I'm looking for would be used to evaluate, on a given period of time (ex. Fiscal Year or a month), the total costs associated to the replacement units by sales order item.
1) An existing report (which I have not found) exists, please let me know which one
2) There is another way to track such costs within SAP.
Please let me know if there is a standard report which tracks costs related to replacement goods.Hi,
I got the required from MBEWH table.
Thanks
Aravind -
Report showing labor and machine time based on standard cost estimate
Hi Friends,
Ours is an Manufacturing organisation & we have a requirement of report showing machine and labor time as per part wise & cost center wise. We need to run the report before saving standard cost estimate [CK11N] in order to see the part wise or cost center wise discrepancies in machine and labor time. If any one could help in creating such report in SAP it will be of great help.
Regards,
VarshaHi Varsha,
you can jump from CK11N to a own report by
Menu Function 'Costs -> User Exit Display'
Cost Report 1 / 2 / 3
The own report can be implemented via (SMOD) enhancement SAPLXCKA
The report will be handed over the currently displayed in the program interface.
some example coding is provided for the exit.
compare SAP Note No. 71146
best regards, Udo -
Standard Cost Analysis Report (MCI3)
Hi,
On SAP standard Cost Analsys report, i have been unable to dig out the reason of not populating values in following few columns.
- Int. wage costs
- Int. Mat. Costs
- Ext. Wage Costs
- Extenal Mat Costs
- Services Costs
Can anybody guide me in populating these values.
Regards
Shahhi
if you have posted any material against the order ,then the cost will be reflected in int.material cost ,which is also same for other parameters
also check whether you info structure is switched on OMOS
regards
thyagarajan -
Standard cost element reports are not available
Hi everyone,
I noticed that there are no standard cost element reports available in our SAP application. Is this because they are not imported or is this caused by another problem ?
Help would be greatly appreciated and points will be rewarded
Kind regards
Message was edited by:
Björn Demol
Message was edited by:
Björn Demolcan you tell me how did u resolve this issue
Regards
Bilal -
Difference between Report Template "Standard (PPR)" and "Standard"?
What is the difference between Report Template "Standard (PPR)" and Report Template "Standard"? What does PPR mean and what makes it different? Why would you use PPR rather than just standard?
Thanks,
LindaHello,
PPR (Partial Page Refresh) is just a term used to describe some AJAX pagination and sorting functionality, it's just a holdover from before the term AJAX existed.
You can just change the template and on your report to enable that functionality. In 3.0 it will just be on off switch in your pagination options.
Carl
Message was edited by:
Carl Backstrom -
Relation between Preliminary and Standard Cost Estomate
Hi,
I would like to know how preliminary cost estimate using product cost collector and standard cost estimate are related to each other.
I am not quite clear how both are used for a given plant in repetitive mfg scenario?
Regards,
YogeshHi,
Thanks for the reply,
My question do not need so many details for its answer.
I would just like to know if standard cost estimate will still be required even if we are using repetitive manufacturing or it gets handled through product cost collector.
I would like to know if there is any overlap between the two from process point of view.
Regards,
Yogesh -
Custom SAP report used to display an average standard cost per material.
Hi All,
I need to implement a report with the following functionality,
This is a custom SAP report used to display an average standard cost per material. Standard cost data is stored in SAP at the Material/Plant level. This report will gather the individual Standard Costs at each applicable plant (restricted by selection screen input and additional logic specified in more detail in the u201CReport Fieldsu201D section) for applicable Materials (restricted by selection screen input; if not specified all materials should be returned) and calculate an average standard cost for each material. The corresponding Currency and Base Unit of Measure will also be displayed.
Additionally the relevant u201CCommodity Code/Import Codeu201D information should be displayed for each material returned. This attribute is also stored at the Material/Plant level. To determine the value of this field for each relevant material, the report logic must retrieve the values stored for each plant. If all values are the same, the value can be output to the report. If not all values are equal, a message u201CNot Consistentu201D should be output. It should be noted that if all values are u201Cnull,u201D a null value should be returned in the report.
Can any one provide me with sample code for the same??
Thanks Debrup.Hello,
Also refer this [ THREAD|Re: error in Fleet management customising] and [link|Error when recording measurements in IFCU]
Regards
Nav
Edited by: Desire_Naveen on Nov 4, 2009 12:35 PM -
Report for Net Sales amount ,Other Allowances, standard Costs
Hi,
is there any SAP standard report to generate report as We need to run a report to see by Material and/or Product line the Net sales amount and units for a given time period. By net sale I mean Gross sales net return, net other allowances
also we need to have standard costs in the report.
Please let me know if you know of any report in SAP which can give me these values.
Thanks,
Arthydo you manage profitability analysis?
in case, yes, you can have report with net turnover and standard cost.
1. about net turnover you need to map sales order condition for net tunrnover to value COPA value fileds.
2. about standard cost you need to activate COPA valuation.
it is only a short suggestion, but you can find much information on this topics in the forum
Paolo
Maybe you are looking for
-
How can I scan and send a copy to my email
How can I scan and send a copy to my email
-
When I open my Colour Picker, the middle block (which normally shows the colour in a gradient of shades) is just a solid colour depending on which H, S, B, R, G, B I have selected. How do I revert it back to normal?
-
Livecycle 8.0 multiple signatures problems
Hi, When I add 2 digital signatures to same pdf document and sign them, the first signature reports "The revision of the document that was covered by this signature has not been altered; however there have been subsequent changes to the document". Th
-
Solutions for hard to see HDD LED
I was looking for some easier ways to see the hard drive activity since HP has moved the HDD LED to the left or right side of the newer laptops. I really hate not being able to always see what the hard drive is doing since the change in placement of
-
Cannot move inside the Fonts window using arrow keys?
I'm pretty sure there was a way to move around in the Fonts menu using the arrow keys. The selected Collection, Family or Typeface would turn from grey (not able to navigate) to the blue (able to navigate). Does this ring a bell to anyone else?