Report in the back ground

Can anyone explain me how we have to run a report in the background step by step???

Hi,
U can run a job in background as below:
1)Press F8 enter selection screen vallues if applicable, then press F9 instead of F8.
2)It will give a pop-up in that u schedule job immediately and save it. Now the job will be running in background.
3)To view the job, goto SM36 then press job selection this will lead to SM37. So u can directly goto SM37 too.
Mark the Schedule Check box in order to view the scheduled jobs also.
4) Press Execute. This will display the status of the job, either finished, Cancelled.
For finished job just check that and press Spool button to view the output.
5)If u want to debug then choose the job and in the command prompt type JDBG and press enter. Now u can debug.
Hope this helps.
reward points.

Similar Messages

  • How to suppress the back-ground execution of a query in design mode

    hi guys,
    there is a bahaviour of the system, that I'd like to change. So, when we
    1. start EXCEL
    2. go to the designer mode to create a report
    3. first drop an InfoProvider (e query) into a cell,
    4. second - pull e.g a filter element into another cell, still being in the design mode.
    Just in this moment, the query itself has been already started in the back groud, aiming to fill the cache, I guess.
    Does anyone know how to suppress the back-ground execution? I'd like to control, when to start the reports execution.
    Thanks in advance.
    Neven

    Hello,
    There is no way to do that if you are creating thru BEx Analyzer.
    Instead use the BEx Analyzer, try to create using directly BEx Query Designer.
    In that way, the query will not be executed, until you want to...
    Thank you
    Edward John

  • Running a report in the back groud using a another report

    i have a parent program and a child program.
    now the child program is run using the parent program in which i must have the out put of the child program either in the back ground and in the foregroud. i'm using  <b>submit</b>(in the parent program) to run the child program in the back ground.
    But here my issue is i have same selection screen in the child program and in the parent program. And two more extra radio buttons(in the parent program) to select and to run the (child) report either in the <u>back ground or in the fore ground</u>. How do i approch at this problem.

    Hi,
    Use code similar to this one:
    SUBMIT Z_REL
    via SELECTION-SCREEN
    USING SELECTION-SET <VARIANT1>
    USING SELECTION-SETS OF PROGRAM 'Z_CAL'
    and return.
    Here <Variant1> is variant created for report 'Z_CAL'.
    See the below help for more info:
    ... USING SELECTION-SETS OF PROGRAM prog
    Effect
    Uses variants of the program prog when executing the program rep.
    Note
    Important
    The programs prog and rep must have the same SELECT-OPTIONS and PARAMETERs. Otherwise, variants of the program prog may be destroyed.
    Note
    When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari. On the other hand, all variant-related actions on the selection screen of rep (Get, Save as variant, Display, Delete) refer to the variants of prog.
    Example
    SUBMIT REPORT01
    VIA SELECTION-SCREEN
    USING SELECTION-SET 'VARIANT1'
    USING SELECTION-SETS OF PROGRAM 'REPORT00'
    AND RETURN.
    Effect
    Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00.
    Thanks

  • Error while activating ODS is not caught in the back ground job..

    Hi All,
    We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
    My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
    Thanks for reading.
    Umamaheswar kumar

    Hi Uma,
    A few hints for running and schedule and monitoring process chains:
    - always schedule the process chain in tcode RSPC
    - check the log in RSPC for error messages, or
    - check BW monitor for the ODS concerned (tcode RSMO, tab Details)
    if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
    either in RSPC - log or RSMO.
    hope it helps.
    Regards,
    Lilly

  • How do I turn off programs running in the back ground on my iPad

    How do I turn off apps running in the back ground with the new update

    How to Close Apps
    Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
    From Here  >  http://support.apple.com/kb/HT4211

  • With the newest update; when cliking on a picture to view in a larger size, the back ground of the pictures are in black; not white like the previous version

    how can I get the back ground to be white again; with out "downgrading"

    It is a new feature in Firefox 11+ versions to display a single image centered with an almost black background.
    It is added by this stylesheet:
    * resource://gre/res/TopLevelImageDocument.css
    You can look at this extension to set your preferred background color and remove the centering.
    * Old Default Image Style: https://addons.mozilla.org/firefox/addon/old-default-image-style/
    See also these forum threads for other solutions (e.g. userContent.css):
    *[[/questions/923127]]
    *[[/questions/923431]]

  • Genetare the back ground jobs of the program from the SM36 tcode

    Hi All,
        Consider the following points:
    -- My main program will schedule the jobs using the CALL TRANSACTION method
    -- Now i want to create a Variant for the Main program and generate the back ground job using the SM36 Tcode
    -- Finally it has all the jobs of the main program
    -- Program is working fine from the Frontend only.....
    Please provide solution for the same.
    Thanks in Advance.
    Regards,
    Ramana

    Sravya,
    On SM36 when you schedule jobs, you will see options like AFTER EVENT and AFTER JOB. You can use these to schedule you jobs accordingly. Else you can also think of making each of these jobs as a steps in one single job if your requirement allows you to do the same.
    In case of using events, you should make sure to raise the event using available FMs.
    thanks,
    Vikram.M

  • During playing music all my photos , my contact, my messages appears in the back ground. What can I do.

    During airplaying music, automatically start in the back ground, my contacts, photos messages etc. What can I do?

    Are you selecting Airplay Mirror and it's showing the phone screen?

  • Pop-Up in the back ground

    Hi All,
            I have a program in which I am using a FM to give pop-up.
            The program is cheduling in back ground.
             I am getting an error at this function module saying that
             Input is not provided.
    So Can we use this type of pop-up FM in the back ground scheduling programs or not?
    If anyone has faced same problem please help me out.
    Regards
    Abhilash.

    Hi,
    i think u wont be able to use such programs in backgrnd..
    coz one a pop-up occurs there is some user interaction like save, cancel etc..without that acknowledgement program wont move further.
    Regards,
    Amit

  • How can i put out the back ground music???

    how can I set off the back ground music??

    I'm afraid your question is not clear. If you don't want music playing, close iTunes.  If the music is on a web site that you are visiting, mute your sound -  System Preferences>Sound>mute.

  • Changing the back ground screen in Apex

    Hi guys  how do you change the back ground in an application from the normal white back ground to sort of incorporate some sort of wall paper to make it look better 

    In general this will depend on your theme.  But this CSS would work:
    body {background-color: #E3E3F0;}
    It changes the body tag, which is the whole page to a specific RGB color.
    Thanks
    -Jorge

  • What is the back ground job when we run an Attribute Change run ?

    Dear One´s,
    What is the back ground job when we run an Attribute Change run ?
    Thanks in advance,
    Raj

    Hi Raj,
    1. If the attribute change run is triggered through process chain the job name is 'BI_PROCESS_ATTRIBCHAN'
    2. If the change run is triggered from RSA1> tools?Appl Heirarchy/Attribute changerun then the job name starts with BI_STRU*
    3. If you trigger the program RSDDS_AGGREGATES_MAINTAIN from SE38 then the job name will be RSDDS_AGGREGATES_MAINTAIN
    Hope this helps...

  • Schedule the Back ground Job with Fiscal Year Vaient????

    Hello Guru's,
    Please let me know the process of "Schedule the Back ground Job with Fiscal Year Vaient" in APO DP?
    Great thanks for your help.
    Regards,
    Sree

    Hi Venkat,
    As i told i am maintaining the periods as 5-4-4, So i want schedule the job as first after the 5th week, then after the 4 th week, then after the 4th week and again after the 5th week ...... like that....
    can we schedule the job in back ground as per this periodically???
    Thanks for the response.
    Regards,
    Sree!!
    Edited by: sree gunti on Nov 26, 2008 3:30 PM

  • MRP - scheduled at the back ground???

    hii
    Can somebody explain me how to set MRP to be scheduled at the back ground.
    I have to create New MRP controller and do the MRP scedule at background for the same.
    Step by steps activities for this and if any ABAPer help we have to get , mention that also.
    Thanks

    hii kumar
    Thanks for ur response.
    But i have gone through, still i need some clarification.
    Whethere in satandard SAP system there no possibilities to do MRP scheduling at Back ground at MRP controller level.
    What i m asking , i have one company code , 4 plants , i have only one MRP controller.
    Using that controller i have to do the MRP setting at background (Automatic).
    Note: One  MRP controller is used for every material type , hence we have only one MRP controller.
    For abouve requirement ,suggest how to proceed furthere .
    Thanks

  • MRP scheduling at the back ground??

    hii
    Can somebody explain me how to set MRP to be scheduled at the back ground.
    Step by steps activities for this  and if any ABAPer help we have to get , mention that also.
    Thanks

    Hi,
    Plz refer this thread
    [mrp;
    Regards
    Madhu

Maybe you are looking for