Report in Unix

I am with problems when passing a report developed in windows for the Unix. It loses all the text font configuration modifying the lay-out of the report. Somebody already had this problem?

Hi,
This is very likely to happen if you develop on windows and deploy in unix, but don't make sure that all the fonts that are used in your report are available in unix. As a result, wrong fonts get picked up wile generating report output, and you see mis-alignment.
Pl take a look at Publishing Reports 10g, Chapter 4 (Manage fonts), Chapter 5 (Printing) and Chapter 6 (PDF), before generating output on UNIX:
http://otn.oracle.com/documentation/reports.html
Navneet.

Similar Messages

  • How to Start Oracle Report in Unix?

    hi
    Does anyone know how to start oracle report in unix? I was
    told to try this (r60desm) but that did not work. We are on 11i
    and 6i. Please help
    alpha

    I don't have Forms/Reports 6i for UNIX. Have you tried typing "r60" and typing tab twice?

  • Calling a report from unix shell script

    Hi,
    I had to call a report from unix shell script.
    May i know the procedure to accomplish this
    Thanks in Advance
    A.Gopal

    First you should not include the whole path to your report in the call ...
    Use like this:
    /ora/u01/oracle/v101/as2/bin/rwrun.sh report=an_stati destype=file desname=/ora/u01/oracle/v101/as2/test.pdf desformat=pdf
    In $ORACLE_HOME/bin/reports.sh:
    1) Verify that you have updated the REPORTS_PATH variable to include your folder where you have the report in question
    REPORTS_PATH=/ora/u20/app/qits/env1/run:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo: ....
    2) Verify that the REPORTS_TMP variable is pointing to a valid location and that the oracle user has access to write on it.
    After that, post the content of the tracefile located at $ORACLE_HOME/reports/logs/{in-process report server name folder}/rwserver.trc
    If no file is present then it means that you need to enable trace in your reports's conf file.... go to the $ORACLE_HOME/reports/conf folder and and locate the .conf file that correspond to your in-process reports server name (as specified in the rwservelet.properties file)... open/edit the file to enable trace logs ..
    i.e.
    Change the following line:
    <!--trace traceOpts="trace_all"/-->
    to <trace traceOpts="trace_all"/>
    Bounce the reports server and try to run the report again, this time the .trc file should be generated, post the content so that we can take a look.

  • Can't open a report in unix

    Hi,
    when i open a report in unix by using rwbld60 , it is saying that you are using older version of report builder you might have lose the functionality,
    if i still click on continue the report is automatically closing off.
    so what is solution to get that report open and need to do some changes it is an urgent.
    please help me.

    Hi,
    rwbld60 is for Oracle Report 6i. The report you are trying to open was developed using a newer version of Report Builder though. Simply look for rwbuilder in ORACLE_HOME/bin/ instead of rwbld60 or install the newer version of Oracle Report Builder if you don't have it yet. Note, that you may have several Oracle Homes in your development environment so check them all or do a search for rwbuilder in your system. You have to use the same version of Developer Suite that was used for creating your report.
    Regards,
    Julius Z

  • Getting error while posting reports on Unix Process Scheduler Server

    Hello ,
    I am getting the below error while posting reports on Unix Process Scheduler Server .
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
    PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    Please advise ,thank you.

    user5838027 wrote:
    Node name :PS_HTTP
    URL: http://ddas1020.dev.com:16000/psreports/hrdmo
    URI:SchedulerTransfer/hr90dmo
    URI Port: 16000
    Please let me know if any other info is needed.
    Thanks.
    typo...
    URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
    Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
    Did you also tried to give the web login/password ?
    Nicolas.

  • Running Oracle Reports in unix, output in pdf file

    Hi all,
    Anybody currently running Oracle Reports in unix platform and the output is generated in pdf format & display in browser?
    Can you please advise on what are all the environment variables that I have to set in order to get the report runs?
    Besides, what are the specific printer setting that I have to set? as well as priviledge on directory if necessary.
    My reports are created in PC with RDF format. When run in unix, can the RDF still be used or it has been to recompile? If recompile, how is this done?
    I always get the following error but do not what is the cause:
    REP-0110: Unable to open file 'myreport.rdf'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'myreport.rdf'.
    Please advise.
    Hope to receive your reply asap.
    Great thanks in advance.

    What command did you type in to run your report in Unix? Did you give the full path of your rdf file. I guess that the system may not be find your rdf file correctly.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by guest2000:
    Hi all,
    Anybody currently running Oracle Reports in unix platform and the output is generated in pdf format & display in browser?
    Can you please advise on what are all the environment variables that I have to set in order to get the report runs?
    Besides, what are the specific printer setting that I have to set? as well as priviledge on directory if necessary.
    My reports are created in PC with RDF format. When run in unix, can the RDF still be used or it has been to recompile? If recompile, how is this done?
    I always get the following error but do not what is the cause:
    REP-0110: Unable to open file 'myreport.rdf'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'myreport.rdf'.
    Please advise.
    Hope to receive your reply asap.
    Great thanks in advance.<HR></BLOCKQUOTE>
    null

  • Reports frm unix

    hello all!
    Where can I find the "unix-batch-report-generator"?
    I don't know how to call it, I'm talking about the utility that will allow me to generate reports under unix.
    by the way I'm on Oracle Dev 6i and 9i database.
    I'd like to know (can't find on web) if there's any incompatibility regarding reports and AIX OS.
    thanks in advance.

    rwconverter.exe

  • How to install 10g Forms and reports in Unix

    Hi All,
    How to install 10g Forms and reports in Unix, do we need to install 10g AS then desktop forms and reports, Any metalink documents for reference .
    Thanks

    Is it really so hard for you to find the installation guide?
    http://download.oracle.com/docs/cd/B25016_08//doc/dl/core/B16012_04/toc.htm
    For the Developer Suite you don't need the App Server. You need the App Server for production.
    Edited by: InoL on Jul 19, 2010 1:22 PM

  • Run SQR Reports in Unix

    Hi!
    Is there any way to run SQR Reports in Unix. We have solution to run the SQL programs but not SQR programs. I mean do we need to install any software for this etc...Please Help!
    Thanks

    We use SQR reports for our applications.
    To execute the scripts.
    We build the executable first using the following command:
    sqr 'SQR FILE NAME' -rs oracleuname/pwd.
    This builds .SQT FILE.
    Then we use the following command:
    sqr 'SQT FILE NAME' -rt oracleuname/pwd paramaters if any.
    You need the SQR Software installed.
    Hope this helps you.
    null

  • SQR Reports in UNIX

    Hi!
    Is there any way to run SQR Reports in Unix. We have solution to run the SQL programs but not SQR programs. I mean do we need to install any software for this etc...Please Help!
    Thanks

    We use SQR reports for our applications.
    To execute the scripts.
    We build the executable first using the following command:
    sqr 'SQR FILE NAME' -rs oracleuname/pwd.
    This builds .SQT FILE.
    Then we use the following command:
    sqr 'SQT FILE NAME' -rt oracleuname/pwd paramaters if any.
    You need the SQR Software installed.
    Hope this helps you.
    null

  • Running Discover Report In Unix

    Hi All,
    In my requirement I need to run a discover report in UNIX environment with parameters
    Could you please give me the unix command for this.
    Thanks in advance...
    Regards
    Y.Brahmaiah

    hi brahmaiah,
    follow this Re: How to run Discoverer 10g report from unix command line
    hope answered.promptly award points.
    Cheers,
    KK

  • Schedule reports in unix

    Hi,
    I would like to schedule reports in unix. I m using Report 6i.
    Can anyone kindly state the steps and commands, in order to achieve that ? and also, to know the filename of the final output.
    Thanks in advance.
    Regards,
    Joreen

    1) Start reports server
    2) You can schedule reports using "schedule" command line option of rwcli60.
    example
    rwcli60 <other cmd lines> schedule="every_first_fri_of_month_from_15:53_Oct_23,_1999_retry_3_after_1_hour" server=server_name
    to know the filename of the final output<<This is controlled by user . You need to give the filename in "desname" cmd line
    rwcli60 ...... desname=F:\test.pdf server=server_name
    All docs for all versions are here. You can get 6i doc from here and read for more details
    http://otn.oracle.com/documentation/reports.html
    Thanks
    Ratheesh

  • How do i compile report from unix?

    Hi,
    I have one package which i call in After Form trigger. Whie compiling that Trigger, report gets closed. so now i want to compile that report though unix.
    so if anybody have idea how to compile report though UNIX then it is great help for me.
    Thanx in advance.

    You can also use the command line args.......
    <$ORAHOME>/bin/rwcon60 userid=<$user>/<$pass>@<$db> batch=yes source=<$myreport.rdf> stype=rdffile dtype=repfile overwrite=yes
    Thanks

  • Run report from Unix prompt

    Hi,
    for audit reasons we need to run a report again. Therefore a changed the where-clause of the report. Since the report needs to run on our production system and the prodcution-version of the report can not be changed, I need to run the report from the unix prompt. Can anyone tell me how to run an Oracle reports 2.5 from the uni prompt. We are using Oracle Applications and therefor still on reports 2.5....
    I tried to run the report from the client, but since the report fetches alot of data, my harddrive with 1.7GB of free space ran out of resources. Therefore I can only run the report on the production system (a little bit more resources...).
    Thanks in advance, Roel.

    Hi Roel,
    Go to $ORACLE_HOME/bin directory. You can see the reports executables r25runm - Runtime, r25clim - Client.
    You can run your report like this:
    r25runm report=myreport.rdf userid=scott/tiger@mydb destype=file desformat=pdf desname=myreport.pdf
    (or)
    r25clim report=myreport.rdf userid=scott/tiger@mydb destype=file desformat=pdf desname=myreport.pdf server=myserver
    Please, Change the desformat and destype as per your requirement.
    -Siva B

  • How to run Discoverer 10g report from unix command line

    Hello Experts,
    I am aware that discoverer report can run through command line using "dis51usr.exe /connect username/passward@connection_string /opendb "DISCOVERER.<<report name>> /export xls"".
    Can we run discoverer 10g report (stored in database) from server location / unix command line? Is there any command?
    Please assist. Thank you.

    Hi Tamir,
    Can you please mention from where we have to execute/run these commands? After setting enviornmental variable, are these commands run from any location or we have to go to particular server location and then execute (ex. from directory BI or else).
    Thank you.

Maybe you are looking for