Report including: GIT report = (not related to stock transfers)

Dear Gurus
We need a report which includes the following information by plant / material
PO Quantity / delivry date / GR quantity / GIT QTY / estimated arrival date / open Qty
I have reviewed all reports under PO -> List display, and none of them gives me the GIT quantity.
We use inbound deliveries to record the incoming shipments, so I reviewed anything for inbound deliveries.
VL06I gives me only a list of inbound deliveries created in the system, but wil not give me whether this inbound deliveyr has been alredy goods receipted.
I canno use button "For goods receipt" as this transaction allows the mass goods issue posting which we cannot grant to those users.
Anything out there what I have missed? (We are on version ECC6)
Many thanks for your help. Really appriciated
Brigitte

Hi,
You can try transaction AUT10 report which gives the field change done in particular transaction, with user id.
If your quer does not resolve through this report then you need to you just CDHDR table with object clas as EINK*(i am unbale to reconize the whole name of object class) enter the date. You will get the PO which are changed. Then you can pick the change document number and user id from this table enter in the CDPOS table where you will get field change details means whether the PO release indicator were changed or some other fields are changed. Fetch the relevant data and show in your report.
Thanks
Shashi

Similar Messages

The reporting point backflush is not possible for make-to-stock repetitive

Hi All,
we are using the assembly backflush in the MTS REM process. we are need to do the reporting point backflush
if we tick against the RP backflush. what will be the effect in the process while confirmation.
i read the sap library . it say like
The reporting point backflush is not possible for make-to-stock repetitive manufacturing.
is it correct.
Thanks
VRaj

Hi mangal,
i did all the setting as you said. but when click on the reporting point.
system thru error
Error reading reporting point information
Message no. RM111
Diagnosis
The repetitive manufacturing profile is set for the reporting point procedure. However, either no reporting points exist for the material or they are incorrect. Two common reasons for this are:
The repetitive manufacturing profile has been changed in the current session.
You have not defined any milestone operations in the routing.
When creating the product cost collector, no reporting points were created.
Procedure
Two alternative solutions are possible:
Assign a repetitive manufacturing profile with no reporting point procedure to the material in the material master record.
Recreate the reporting points by recosting the product cost collector. To do this, the following prerequisites must be met:
In the material master record, in the production version, you must enter a routing under either detailed planning (first priority) or under rate-based planning (second priority).
Milestone operations must exist in this routing. The system ususally automatically creates the reporting points from these milestones when creating a product cost collector or when creating a production version.
how to create the REPORTING POINT

Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. 

What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

Reports included in the page keep looping without retrieving any results

We are facing an issue related to the behaviour of Siebel Analytics when more than 1 answer are included in a dashboard page. When a report is generated, the other reports included in the page keep looping without retrieving any results, but if I manually click on 'cancel' link, the reports successfully appear with consistent data. This behaviour is not stable since sometimes the page works fine, sometimes not, but it's not clear what it depends on. Can anybody please let me know if this behaviour is a known bug.

Hi Deb,
Could you please explain me in more detail?
The problem is we are able to see the old reports that we were already moved into Q environment. The newly moved 5 reports are giving this error message.
Please help
Thanks
Sri

INVENTORY REPORT for customer but not consignment company owned

HI Everyone,
I am working on creating an inventory report and sending it out to a customer.
We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
The above process is a scenario that still needs to be worked on...
THe customer should be able to look at only his stock and not any other stock....
Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
If there i a better way through which this can eb done please suggest me... thank you..
Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
Thanks & regards
AHP.

Stock report with the field... last stock changed at certain date?

Is there any standard report with the date of the last change of the stock value and quantity?
Points granted
BR
Saso

Hi people,
I want to know why MBEWH have not any material stock information for period when doesn´t exist any inventory movement for some materials, for example I have a case in 12.2006 period the material A have stock quantity 100 and value 1000 and the next period 01.2007 no stock movements were done for this reason the MBEWH had to had the same values stock 100 and value 1000 in 01.2007 period, but in MBEWH is missing, there is not any information for material A in this period.
Anybody knows about this problem?
Thanks.
Lili.

Report in Payment Wizard - Non Included Transaction Report

Hi Guys,
Within the Payment Wizard is a report called " Non Included Transaction Report", later in the wizard also referred to as "Error Log Report (System)".
I would like to recreate this report so that I can add some additional fields on the Purchase Invoice side only, to make the report more helpful.
I believe the tables I require are PWZ5 and OPOR, however when I run my query I get 96,000 plus entries returned which is not correct for just one month !
This is the query I have:
SELECT distinct T0.[InvID], T0.[CardCode], T0.[CardName], T1.[DocDate], T1.[DocDueDate], T1.[Ref2] AS [Supplier Invoice No], T0.[Amount], T0.[ErrDisc] FROM PWZ5 T0 , OPOR T1 WHERE T1.[DocDueDate] >=[%0] AND T1.[DocDueDate] <=[%1]
Am I on the right tracks or have I missed the mark by a country mile - could someone please point me in the right direction or has anyone else recreated this ?

Hi,
Try this:
SELECT distinct T0.InvID, T0.CardCode, T0.CardName, T1.DocDate, T1.DocDueDate, T1.Ref2 AS 'Supplier Invoice No', T0.Amount, T0.ErrDisc FROM dbo.PWZ5 T0
INNER JOIN dbo.OPCH T1 ON T0.InvID=T1.DocEntry
WHERE T1.DocDueDate >=[%0] AND T1.DocDueDate <=[%1]
Thanks,
Gordon

Csv-export with dynamic filename or include a report footer?

Hi All,
I have a question regarding the exported csv file contains a variable value as part of the file name.
I read the following thread and example from Denes here:
http://htmldb.oracle.com/pls/otn/f?p=31517:39:2021865942697087
How to generate Excel file name
I created a test page per instruction and I could successfully duplicate the effort and verified the csv file contains the variable value if I click on 'export to CSV' from the link.
However, the application I am working on is slightly different. Basically in page 1, there is a 'download' button which branches to the page 2. And in page 2, in Layout and Pagination section, the value for the Report Template is set to Export CSV. In REport Export session, I set enable CSV output to Yes and file name is: &P20_REPORT_DATE..csv. Of course, I also have a hidden item &P20_REPORT_DATE whose value gets set in page process before header. Note: in this case, the user never really see the search results on screen when they click on the 'download' button which is different from the above example.
When I run the application, the file name simply doesn't show up correctly, instead it is &P20_REPORT_DATE.csv. It appears that the value of the P20_REPORT_DATE is never set.
Also, is there any way I could include a report header or footer to indicate when the report is generated?
Your help is greatly appreciated.
Thanks,

Hi all,
I'm using Application Express 3.1.1.00.09.
What I want to do is include the current date in the report filename. I created an item on Page 0 called P0_CURR_DATE, which is the value of "select current_date from dual". So, the filename I attempted to create is Vendor_&P0_CURR_DATE._report (notice the & and the . are included).
When I click the report csv report link, the popup window shows file name as Vendor__report.csv (that's two underscore characters with no characters in-between).
I think that I have figured out my problem. I originally created the item on Page 0, as "Display as Text (does not save state)". So, after I change the item to "Display as Text (saves state)", the csv report filename becomes Vendor_28-JUL-08_report.csv .
I guess that's the pitfalls of being a newbie!
Thanks to all who offered help and suggestions.
Bryan
Message was edited by:
BryanG

Reg:how to include a report in another report.

Hi,
Can anyone please tell me how to call a report from another report.
My requirement is for example please see the below requirement :
In report1 I write the logic.
Zreport1.
select kunnr name1 from kna1 into table itab.
loop at itab.
write: / itab-kunnr,itab-name.
endloop.
In report 2 i write the declaration.
Zreport2.
Tables:kna1.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
Now I want to include or call the report1 in report2 .Can anyone please tell me how it can be done??

Hi,
write the submit statement as SUBMIT ZREPORT1 AND RETURN in ZREPORT2 program..
If you dont execute the ZREPORT1 independently then its better you write that in a ZINCLUDE... and
include that in your second program where ever necessary..
for that check this...
+ZINCLUDE+
select kunnr name1 from kna1 into table itab.
loop at itab.
write: / itab-kunnr,itab-name.
endloop.
*ZINCLUDE ends here...
*Use the above ZINCLUDE as below...
Report Zreport2.
Tables:kna1.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
INCLUDE ZINCLUDE. " this will do the task mentioned in the include above...
I would rather suggest to go for the second method that is _ Specifying ZINCLUDE_ coz for the first one.. you need to
have data declarations and which is not necessary for just a simple select query.. if you are processing
any further in the first program then go for the first method_( SUBMIT STATEMENT)_ by declaring the necessary variables..
This would solve your issue...
Good luck
Narin
Edited by: Narin Nandivada on Sep 9, 2008 4:37 PM

Hyperion Financial Reporting-Print Service is not Starting-11.1.2.1

Hi,
We are using Hyperion 11.1.2.1 and when i look at my Hyperion Financial Reporting-Print service it shows me at stopping and when i right click to stop/start it the options are greyed out.
I have completely stopped all the hyperion services and started them again and now the HFR Print service is showing me as Starting.
Kindly help me what should i do to resolve this issue.
You can see the screen shot at my blog.
http://hyperion-consulting.blogspot.in/2012/08/hi-we-are-using-hyperion-11.html
Regards,
AS
Edited by: Don'tKnow999 on Aug 30, 2012 9:52 PM

Hi John,
Thanks a lot for your reply. I saw the log file however i am not able to understand where the issue lies. Can you kindly hlep me out. Below is the FRPrintLogging.log
[2012-08-31T02:42:54.565-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T02:42:54.565-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vQRewCSs85njp2iZ1GG5mQ000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:12:21.914-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Oracle Workspace
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] Copyright&#169 2000, 2011 Oracle and / or its affiliates.
[2012-08-31T03:12:22.198-04:00] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.printserver.StandalonePrintServerLauncher] [SRC_METHOD: <init>] All Rights Reserved.
[2012-08-31T03:13:46.993-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:249)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:80)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:122)
     at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
     at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.011-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
[2012-08-31T03:13:47.025-04:00] [EPMFR] [WARNING] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000J_vXVlrCSs85njp2iZ1GG6FM000000,0] [SRC_CLASS: com.hyperion.reporting.config.FRConfig] [SRC_METHOD: getFRConfig] [[
java.lang.NullPointerException
     at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
     at com.hyperion.reporting.config.FRConfig.getString(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.initSocketFactory(Unknown Source)
     at com.hyperion.reporting.util.HRPortAllocator.<clinit>(Unknown Source)
     at com.hyperion.reporting.util.FRRemoteObject.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.PrintServer.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.<init>(Unknown Source)
     at com.hyperion.reporting.printserver.StandalonePrintServerLauncher.main(Unknown Source)
]]

ORBO - Daily sales report includes Order Init Transaction?

Hi All,
Can you please any one guide me in ORBO application,the daily sales report includes the Order init transaction details?
Appreciate your help.
Hari.

Oracle Retail application doesn't consider Sale of Item which has not been moved out from the store and in other words all the orders , layaway ,special orders Initiated considers will not be accounted as sale amount despite of retailer has received amount in advance( Item inventory get reserved for those transaction ) .Transaction amount of those transaction will be added in sale of the particular day when those transaction will get completed i.e. Item inventory ( SOH) get down .
I hope i have answered your question. Please let me know if further information required
Thanks
Himanshu Lohani
[email protected]

URL to run a report file that is not located in $ORACLE_HOME/reports dir

All,
I know very little about configuring reports on the web.
We have had a 10g App Server running for several years. All of our reports files so far have been located in the Middle Tier's $ORACLE_HOME/reports directory.
We now have a need to create sub-directories under the reports directory and run reports out of those sub-directories.
After poking around the documentation, I'm not seeing how to do this.
For example:
$ORACLE_HOME/reports (has some legacy reports files in it)
$ORACLE_HOME/reports/EI22 (new directory where we want to put EI22 related reports)
$ORACLE_HOME/reports/EI23 (new directory where we want to put EI32 related reports.....etc)
Normally, to run my reports in the $OH/reports directory, I use an URL like the following:
http://hostname.domainname/reports/rwservlet?report=reportfilename.rdf&userid=uname/pwd@dbname&desformat=html&destype=cache
How would I run a report file that now resides in the EI22 or EI23 directory?
Thanks in advance for your assistance.

As far as I know there is only one SourceDir property, you can assign multiple folders to it ... then at runtime you do not specify anything else in the URL, the reports server will look into each directory in the SourceDir (in order) for the report that you're trying to execute...
If you have multiple versions of the same report located in the same server, then that's tricky because at runtime the reports server will execute the one from the directory where it finds it first.
I personally prefer setting the REPORTS_PATH and having multiple ENVID sections that way in the URL I directly specify the ENVID which where the report is to be executed from...
Here at work we used it for multiple applications with totally independent folders, so each application uses its own ENVID to invoke the reports.
If you do not care/want this type of structure then use the SourceDir property that Andreas has mentioned and you do not need to add anything to your URL.

Include a report in another report - URGENT!

Hi all
I generated 5 reports with Oracle Reports 9i and now I want to manage it as I wish in order to generate a single file (one single big report) as an output.
Can I include one or more reports (.rdf, .rep, .....) inside another report (a wrapper report) ?
This wrapper report has the business logic in order to show one or more little reports inside it.
Note that the output of my business process is one single file.
I hope you can help me!
Thank in advance
Regards

See my reply in:
Nested Report

Reports in Favorite Reports did not run when open

In SCOM 2012, I have run a few reports with the report template in the default SCOM management pack and saved them in the Favorite Report. When I open the saved reports at the Favorite Report again, they suppose to be run automatically. However, when I open
the report, it stopped at the parameters page and I need to click the run button explicitly. Does any one know why it is so and how can I make it run automatically when I open the reports which I have saved in the Favorite Report.
Thanks a lot for any advice.

Thanks a lot for your comment.
First of all, there is no error at all and no message in the event log that related to this issue. The report saved in Favorite Reports did able to run successfully without any error just only I need to click the run button manually. Suppose it should run
automatically, right?
Second, there actually two MS (say MS01 and MS02) and both of them point to the same SSRS. Say for example, the report saved in the Favorite Reports at the Operation console on MS01 will not run automatically when open it. The behavior is the same when using
the Operation console on MS02 to open that particular report saved on MS01.
However, when I save a report in the Favorite Reports at the Operation console on MS02, it will run automatically when I reopen it. Then I use the Operation console on MS01 to reopen this report, it will run automatically as expected.
In short, report saved in MS01 got problem no matter where you open it. Report saved in MS02 got no problem no matter where you open it. It is very weird and I don't know what setting in SCOM 2012 would affect this behavior. In a big head right now...

TF255186: The following SQL Server Reporting Services Instance could not be found

Hi,
I'm trying to install TFS 2013 on a remote SQL RS instance.
Using the TFS 2103 U4 installation
SQL 2012 RS, name instance, Server: SQLProdA, Instance Name COMRS
When I enabled tracing using debugView I see the following output:
[4160] [Error @11:07:10.978] Exception Message: TF255186: The following SQL Server Reporting Services Instance could not be found: COMRS. The server name is: SQLProdA. (type TfsAdminException)
Any ideas what the issue is?
Thanks,
reuvy

Hi Charles,
Thanks for the help. I already saw those links, and am already trying with the format. As I wrote above:
Server: SQLProdA, Instance Name COMRS
So I wrote in the box "SQLProdA\COMRS" (without quotes of course) and I still keep getting that error.
I don't know if it matters, but although this is indeed a named instance, nonetheless, the path to the report server uses the default url (ie.
http://servername/reports) as opposed to the name instance version (ie.
http://servername_instance/reports) as mentioned by your link and this post:
https://msdn.microsoft.com/en-us/library/bb552341.aspx
But, I checked with Fiddler on the server and didn't see it trying to even access the link so I don't think it is related. I saw with Process Monitor that it is indeed trying to access via the network resources on SQLProdA, so I know it's trying.
I have noticed something in the past, and wondered if this could be the issue, that for example if I have Management Studio 2014 installed, I cannot connect to a Reporting Services instance which is 2012. Only when Management Studio 2012 is installed
and being used can I connect. I wondered if this possibly could be related, that maybe the API or something else which the installer is using is missing some component to connect to the RS instance.
Just in case, I already installed both the SQL 2012 and 2014 Client Tools Connectivity (although I first installed 2014, and then 2012).
Do you think this could be the issue? If not, do you possibly have any other leads?
Thanks,
Reuvy

Report including: GIT report = (not related to stock transfers)

Similar Messages

Maybe you are looking for