Report info about a specific machine

Hi,
Does somebody have a report that gives all information in SCCM about a specific machine between a timespan (like between November 1st and November 21st)?
We would like as much as possible info about a specific workstation that's available in the SCCM SQL database, for forensic reasons (i.e. software installed, last user logged in, etc).
The specific workstation has been reinstalled, so checking the workstation itself is not possible anymore.
Thanks!

I’m absolutely sure, If the PC exists within CM07 then they data will be exposed via resource explorer.
http://www.enhansoft.com/
Hi Garth,
What if the OS reinstalled machine got the SCCM Client installed now. Will it still show the old history details? or Will it show the current inventory details alone?
~ Räjeésh M | Blog:
ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

Similar Messages

Info about a specific host server

I have been asked to take over a website and am trying to get
info
about the host system.
I know who the host is, but they have no website for info and
do not
answer my email. In the past, I could use dnsstuff.com to
find out
what kind of box it was, what OS was being run, etc., but
dnsstuff has
converted to a payment service.
What tool can I use to discover this?

Yes, I understand that. What I am trying to say is the
following, and
try it for yourself you will see:
The link that was recommended to me to discover server info
of a host
was netcraft.com.
That link works ONLY if the host has a website present on
their
domain... it gathers info when the web pages are served up.
the host fastdnsservers.com does NOT have a website. As a
result, I
cannot discover info about them, their options, features,
etc.
However, as seen by this link:
http://www.webhosting.info/webhosts/reports/total_domains/FASTDNSSERVERS.COM
they -are- hosting. They will not answer email.
So the original question (modified) remains: how do I
discover
information about what servers, etc. a hosting service is
using? Can
this be done without relying on tools that depend upon
gathering
information from a web page?
On Wed, 21 Mar 2007 22:06:01 +0000 (UTC), Joe Makowiec
<[email protected]> wrote:
>On 21 Mar 2007 in macromedia.dreamweaver, Canned Heat
wrote:
>
>> Thanks to you and Joe for the info, but I probably
have a bigger
>> problem here. The host is fastdnsservers.com.
Apparently they do not
>> have a web site even tho they are currently hosting
6,000+ accounts.
>> With no website, apparently the netcraft link does
not work.
>
>It really doesn't matter whether the hosting provider has
their own
>website. They could be running it on Omega3000 servers on
Mars. What
>matters is what the hosting plan provides. A single
hosting provider
>could have accounts on Windows, Mac, three varieties of
Linux, Sun and
>Cobalt servers.
>
>> So how do I find info about the servers / OS of a
host that offers
>> nothing but a domain name?
>
>Huh?

Read info about files in specific folder into internal table

Hi Experts
I need to have last modified date and filename information read into an internal table. I need to read in the information of all files in a specific (UNIX) folder (I do not know the name of the single files).
I really hope someone can help.
Thanks a lot
Kind regards,
Torben

Hi Guys
Thanks a lot for you input.
I managed to get my program to works as follows:
REPORT ZDELETE_ARCHIVING_FILES.
*Step 1: Get the list of files in the directory into internal table :
DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
      DPATH    LIKE EPSF-EPSDIRNAM,
      MDATE    LIKE SY-DATUM,
      MTIME    LIKE SY-UZEIT.
DATA: BEGIN OF FATTR OCCURS 0,
          FILE_NAME LIKE EPSF-EPSFILNAM,
          FILE_SIZE LIKE EPSF-EPSFILSIZ,
          FILE_OWNER LIKE EPSF-EPSFILOWN,
          FILE_MODE LIKE EPSF-EPSFILMOD,
          FILE_TYPE LIKE EPSF-EPSFILTYP,
          FILE_MTIME(12),
      END OF FATTR.
DATA: P_PATH(50) TYPE C.
CONCATENATE '/ARCHIVE/' sy-sysid '/archive' INTO P_PATH.
*        WRITE: / P_PATH.
DPATH = P_PATH.
*Get files in folder - read into internal table DLIST
*if filenames are longer than 40 characters
*then use FM SUBST_GET_FILE_LIST.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
     EXPORTING
          DIR_NAME               = DPATH
     TABLES
          DIR_LIST               = DLIST
     EXCEPTIONS
          INVALID_EPS_SUBDIR     = 1
          SAPGPARAM_FAILED       = 2
          BUILD_DIRECTORY_FAILED = 3
          NO_AUTHORIZATION       = 4
          READ_DIRECTORY_FAILED = 5
          TOO_MANY_READ_ERRORS   = 6
          EMPTY_DIRECTORY_LIST   = 7
          OTHERS                 = 8.
IF SY-SUBRC EQ 0.
*Step 2: Read the file attributes into an internal table
*Read info about the files (attributes) into the internal table FATTR
*as we need info about the last time it was changed (MTIME)
LOOP AT DLIST.
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              FILE_NAME              = DLIST-NAME
              DIR_NAME               = DPATH
         IMPORTING
              FILE_SIZE              = FATTR-FILE_SIZE
              FILE_OWNER             = FATTR-FILE_OWNER
              FILE_MODE              = FATTR-FILE_MODE
              FILE_TYPE              = FATTR-FILE_TYPE
              FILE_MTIME             = FATTR-FILE_MTIME
         EXCEPTIONS
              READ_DIRECTORY_FAILED = 1
              READ_ATTRIBUTES_FAILED = 2
              OTHERS                 = 3.
    IF SY-SUBRC EQ 0.
      FATTR-FILE_NAME = DLIST-NAME.
      APPEND FATTR.
    ENDIF.
ENDLOOP.
SORT FATTR BY FILE_NAME.
DATA: time(10), date LIKE sy-datum.
DATA: months TYPE i.
DATA: e_file TYPE string.
LOOP AT FATTR.
CLEAR: time, months, e_file.
    IF FATTR-FILE_NAME(10) = 'archive_BW'.
*Convert the unix time into readable time
      PERFORM p6_to_date_time_tz(rstr0400) USING FATTR-FILE_MTIME
                                                 time
                                                 date.
*Calculate the number of months between date (MTIME) and current day
*ex 31.03.2009 - 01.04.2009 = 1 month
*ex 01.02.2009 - 01.04.2009 = 2 month
    CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
      EXPORTING
        i_datum_von = date
        i_datum_bis = sy-datum
      IMPORTING
        e_monate = months.
        CONCATENATE DPATH '/' FATTR-FILE_NAME INTO e_file.
*        WRITE: / FATTR-FILE_NAME,
*                 FATTR-FILE_SIZE,
*                 date,
*                 time,
*                 sy-datum,
*                 months,
*                 e_file.
*Step 3: Delete files where months > 1
      IF months > 1.
        OPEN dataset e_file for output in text mode encoding default.
        DELETE dataset e_file.
        CLOSE dataset e_file.
      ENDIF. "months > 1
    ENDIF.
ENDLOOP.
ENDIF.

Need info about RH Server 6 and reports

I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.

Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John

Oracle 10.1.2 reports create info about alljobs

Hello!
I need to create something like mail info when some reports jobs hang.. sow i think i will need to find way to check reports server for current jobs from command line someone knows that tool? Get info about current jobs from commnad line not from web?
Regards - Marcin

on unix-like systems - rwrqv.sh oracle_home/bin - Oracle OAS 10.1.2
on unix-like systems - rwrqv60.sh oracle_home/bin < Oracle OAS 10.1.2
but on windows... hmmm can`t find maybe somone?

Info about report to rebuild MVER table

Dear guru ,
Can you give me info about report ZMVERBRP that rebuild historical consumptions ?
Oss note 804011 describe that I can use note 791728.
But this note doesnu2019t exist.
Can you help me ?
Thanks

The implementation is free of charge from SAP's perspective as you apply the note. Please make sure that you actually read the code and adapt to your needs if needed.
The note exists but only as a pilot release and and customers will be added only if they really want the reports. SAP does not officially support it. I know it from first hand, I'm the one who releases it to the customers
Cheers,
Attila

Brief report of about 2 months for the sqls run under a specific user ?

Hi,
Is there a way i can get the brief report of about 2 months for the sqls run under a specific user in Oracle 11g.
thanks in advance

913410 wrote:
Yes,
auditing is enabled
SQL> show parameter audit;
NAME                                 TYPE        VALUE
audit_file_dest                      string      /u01/app/oracle/admin/PRCMTDB/
adump
audit_sys_operations                 boolean     FALSE
audit_syslog_level                   string
audit_trail                          string      DBthen how to get the informationabove is necessary, but not SUFFICIENT
default Oracle behavior is that NO specific actions are audited.
You would have had to manually enable AUDIT for all SQL statement by single user

I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for thi

Hi,
I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly . I would like to prepare or get trained well before taking the exam as I see it costs around $500.
Thanks in advance for your help in this regard!
Sincerely,
J

Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
Please use some summarized title for your query.

Dv7-1451nr - I need more specific info about this note, cant find anywhere!

Whats the memory speed, whats the motherboard supported bus? Whats the motherboard?
Why there isnt many info about this note around there? Is it new? Terrible? Better options?

This system should be using using M780G Chipset and supports dual channel DDR2 800MHz...
If you want advance info on the system spec...try cpuz... http://www.cpuid.com/softwares/cpu-z.html
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Need deeper info about RPC paradigm

Having scoured the Web for info about RPC, I find the same few discussions repeated widely, but certain things left unexplored. I therefore have particular questions that remain unanswered.
1) RPC server behavior appears predicated around "connect-call-disconnect, connect-call-disconnect, ..." behavior on the part of the RPC client; that is, a connect-and-disconnect around every remote procedure call. I, on the other hand, need my clients to implement "connect-wait-call-wait-call-wait-call-...-disconnect" behavior; that is, to connect, REMAIN connected for an extended period of time across multiple procedure calls, and disconnect only when the client is ready to terminate all use of the server. It appears that svc_run() supports this, but I want to avoid surprises; is there any restriction on this usage of svc_run()? Can this paradigm be supported by appropriate use of the RPC library routines available for replacing svc_run() with my own code?
2) The only "documentation" I have been able to find about how to write actual RPC programs dates back to 1992 and does not come from Sun. Virtually all of the routines appearing in its example programs are designated "obsolete" or "for backward compatibility" in their manpages on Solaris 8. Can you recommend/point to an instructional text that describes RPC programming as it would be done with "today's" interface?
3) Probably the largest single obstacle to my organization's possible use of RPC in "real," critical applications, is RPC's continuing C-specificity. We write all our applications in C++, and mostly object-oriented C++ at that -- whereas RPC appears not to have advanced beyond the "C with global variables" architecture (with one possible exception, following). Code generated by RPCGEN (without the -C switch, I admit; I haven't gotten that far in my trial-and-error experiments, yet) requires extensive hand-editing in order to compile C++ code that uses it, or link successfully with compiled C++ code. This obstacle is severe enough to potentially render RPC an unacceptable solution for us.
The possible exception I mentioned is that I found a webpage that discussed something called 'rpcc,' which appeared to be an object-oriented, C++ implementation of RPC. The page said this was available "on Sun machines," but I don't find it on MY Sun machines. Other searches do not turn up other references. Such a thing would be a godsend if it existed, and it would seem not to be so difficult for Sun's professional developers to create. So does it exist? If so, how can I get my hands on it?
4) Different sources contradict each other as to the "semantics" of an RPC procedure call. Sun's ONC manual says flat-out that Sun RPC provides only "at least once" semantics -- but then, the manual takes the approach that one is using RPC in a "transport-independent" manner. Other references discuss the issue at greater length (hint, hint) and imply that any RPC implementation can provide "exactly once" semantics, providing that one specifically force it to use "a reliable transport such as TCP." It is not clear how much to infer, or disregard, in Sun's simple statement. I need to know FOR SURE whether Sun RPC can be made, forced, tricked, etc. into providing "exactly once" semantics. If so, is "use of TCP" sufficient? Or are other tricks needed? Please outline the necessary steps that might be needed in addition to using TCP.
5) (Related to 4. Sun documentation contains language to the effect that Sun RPC provides "at least once" semantics because providing "exactly once" semantics "would be too difficult." However, a graduate student (at Syracuse U if I recall correctly) posts a research paper in which he describes an RPC facility, developed from scratch, that provides "exactly once" semantics. Apparently it's not THAT difficult, after all. The fact that it's "too difficult" for Sun does not exactly flatter the company. They may want to revisit this, and provide yet another RPC interface (in C++ while they're at it). I won't even charge a finder's fee. ;-) )
Thanks in advance,
Chris

I agree fully.
None of the example code applies to todays
"real-world" applications. Im trying to implement
multithreaded RPC on Solaris using rpcgen's -N
"NewStyle", -A "Auto multithreaded" and -C "ANSI C"
options but none of the examples anywhere show how to
do this. Is their a better technology that everyone
is using now that does a similar thing?I have an example that might help. It's a multi-threaded
NIS server that's been running in production for several
years. There are a few tricks in the source that might help.
You can download the source with anonymous FTP at
ftp.cc.umanitoba.ca. Look in the `src' directory for
midas.tar.Z.

Export info about all images

How can I export the following info about all images in an InDesign document:
Page image is on
Image name
Image full path
Image location on page (x, y)
I would like to export this data to a txt or csv file with data for each image on a separate line.

Assuming that the report you get when you File > Package an ID file is insufficient, this is a job for scripting.
It's about a 6 line script:
2 lines to open a file, 2 lines to loop over all images, 1 line each to print each piece of information, 1 line to close the file.
I'm pretty sure some have been done before, so search around. If that fails, post in the scripting forum.
Be specific about which x/y you want, though (a corner?), and also how it should handle facing pages and spread coordinates.

HT5085 Gathering Info About your iTunes Library - Keep getting Network error

I bought iTunes Match yesterday, and so far have not been able to use it.
It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
"We could not complete your iTunes request. The network connection was reset.
Make sure your network connection is active and try again"
Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
I've copied the diagnostic results below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 003CA7C40B1E98E0
Current user is not an administrator.
The current local date and time is 2012-05-18 20:20:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bb5c046694c1f4c590202360da9f2bc5
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {444AF521-4D63-434F-AC33-8F05DA9C6C64}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {4F46CBF3-C53C-4615-AF14-B46B9785D100}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
Description:          Dell Wireless 5540 HSPA Mini-Card Network Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
Description:          Intel(R) WiFi Link 1000 BGN
IP Address:          192.168.1.69
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.254
DHCP Enabled:          Yes
DHCP Server:          192.168.1.254
Lease Obtained:          Fri May 18 20:01:40 2012
Lease Expires:          Sat May 19 20:01:40 2012
DNS Servers:          192.168.1.254
Adapter Name:          {B32D9395-8937-42EC-BC5F-352D07958EDF}
Description:          Realtek PCIe GBE Family Controller
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-18 20:14:07.

@ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

Need Info about BW CRM Analytics

Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.S

Dear Jaffer Ali S.,
The following types of analyses can be carried out:
CRM Lead Analysis
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
CRM Activities Analysis
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
Customer Interaction Center (CIC)
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
Opportunities Analysis
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
Sales Order Complaints Analysis
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
Service Qualtiy Analysis
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen.

How to get info about available Toshiba updates?

I have noticed that this has taken over from the online product information button.
I was wondering how do I know now when there is an update availabe for Toshiba specific software and hardware?

To be honest if the system runs well und stabile you don't need any updates. On my one and half year old notebook I still use original preinstalled OS (recovery image) without any Toshiba specific updates. All I have installed are Microsoft updates.
Anyway if you want to have info about available updates pick up info about TOSHIBA TEMPRO tool.

How to get info about Composition/Candidate window?

Hi All,
I'm working on an application which should be able to take multi-language input (especially chinese, japanese, and korean).
When we type something in Chinese/Japanese, there will be Composition and Candidate Window popped up. I want to know whether there is a way to get/set some attributes/info about those windows.
Specifically, I want to be able to position the Composition/Candidate Window anywhere I want...
I've tried the active client tutorial for the on-the-spot and below-the-spot input, but I still haven't find a way to get a 'handle' to the windows...
Can anyone help? Thanks in advanced :)

I do not think the individual temp file percentages is of much use. What you usually want to know is how much of the temporary tablespace is in use and how much is available.
For that I think you want to compare current total usage information that can be found in v$sort_segment against total available for usage data that can be found in dba_temp_files to get the percentage of available temporary file space that is in use.
I quickly put together the following. See if either is on any use in constructing the information you really want.
> @t20
>
> select
2    used_blocks
3   ,total_blocks
4   ,f.blocks                             as FILEBLOCKS
5   ,round(used_blocks/total_blocks * 100,1) SORTSEGPER
6   ,round(used_blocks/f.blocks * 100,1)        TEMPFILEPER
7 from
8    v$sort_segment
9   ,(select sum(t.blocks) blocks from dba_temp_files t) f
10 /
USED_BLOCKS TOTAL_BLOCKS FILEBLOCKS SORTSEGPER TEMPFILEPER
       8960       689664    1025024        1.3          .9
>
> select
2    round(used_blocks/ (select sum(blocks) from dba_temp_files) * 100,1) ||'%'
3    as TEMPFILEPER
4 from v$sort_segment
5 /
TEMPFILEPER
.9%HTH -- Mark D Powell --

Report info about a specific machine

Similar Messages

Maybe you are looking for