Report instance history not refreshing

Here is my issue.  I view the history of a published Crystal report in Central Managment Console.  I then try to view the history of another report and it displays the history of the previous report I viewed.  The only way I can view another reports history is to log out of CMC, clear the browser cache and close the browser.  I then log back and I can view ther history of a different report.  I have played with the browser settings to not avail.  Any ideas?

Hi,
It sound like you are using WebSphere as your application server, if yes  then follow the SAP Note 1250113.
Thanks,
Muhammad

Similar Messages

  • Enforcement states for a deployment report status is not refresh..

    Enforcement states for a deployment report status is not refresh.
    We have deployed patches by software update and monitoring status by checking report
    Enforcement states for a deployment. We have observed status difference in report and in actual PC. Status of One PC is
    Downloaded update in report  but actually that patch was
    installed on PC.
    why this difference and what is the solution to solve this.

    Hi Garth - I don't recreate the SU group. I recreate the deployment from
    the SU group.
    The SU Group contains all deployed updates and the deployment is a "catch-up" and targets a collection of all clients on the particular platform ie. Server 2008 R2. It's a mandatory deployment and I've set it to report "all messages" as opposed to the default
    "success and failure".
    There's no particular SU that are showing ESU. It's the client that shows ESU via the report "Enforcement States for a Deploymennt", and it's only ever the clients that were "Pending System Restart" previously that change to "Enforcement State
    Unknown". The software centre on these clients all know they're pending restart, and if the pending restart is performed on the client it will then change to "Compliant", but it never changes from ESU while its real state is "Pending Restart".
    Hopefully that clarifies the scenario.
    Like I said, I have a workaround, but I'd like to eliminate this behaviour on all my SCCM 2012 instances which are all affected.

  • Report Portlets do not refresh data.

    How can I refresh a report portlet?
    I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
    Thanks, Deb

    I had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.

  • Crystal Report Server XI recurring report instance is not viewable

    I have scheduled a report to be run every morning, and each instance return status is "success". However, I encountered the following problem when I try to view instances of the report: There is a long time period of waiting (seems to be waiting for some kind of timeout), and then eventually the message: "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
    I also noticed that in event viewer (windows server 2003) I see many failure audits to login to the sql database, and the events contain the login used in my data source.
    It's interesting to note, that when I run a single instance of the report "Now" there is no problem.
    Some info about the report which may be relevant:
    The report uses 2 formula fields to auto-parameterize 2 of the 5 parameters used by a subreport. The other 3 subreport parameters are set when scheduling the report.
    The subreport uses a call into a stored procedure in a MS SQL server 2005 database to retrieve its records.
    The 2 fields which are parameterized are datetime fields (StartTime, EndTime), and the main report is basically just a wrapper to only show the previous day.
    JDBC data source to local Sql server instance.
    Also, the crystal report server XI install uses the same sql server instance to store CMS data under a separate database.
    I'm stumped on this.
    Has anybody encountered this problem?
    Is there a simpler way to auto-parameterize the report?
    Why are the failure audits occurring when I view the instance of the report? Is this because the instance is setup to use RPT output format?
    Are there logs I can look into aside from event viewer? I can't find anything that looks relevant under program files, but perhaps I missed something.
    The failure audits would make more sense to me if it occurred with the other report instances, but some instances are shown correctly, and some just do this timeout thing.

    Hello AV,
    please look for the log files here:
    drive:install folder\businessobjectsenterprise11\logging
    by default c:\program files\business objects\business objects enterprise 11\logging
    Please make sure that tracing is switched on for the individual server.
    Please find [online docu |http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_crs_install_win_en.pdf]here
    Falk

  • Report Map Section not updating after refresh

    Hi
    I have created a section in my report based on employee.  After executing the report for the first time the report map shows the section and each employee for which a section has been created.
    The is really useful as you can use the report map to navigate directly to info for a specific employee.
    When I refresh the query and select a different cost center a new list of employees is presented in the report, however the report map is not refreshed to relect this new list of employees.
    Is there a separate step to get the report map to update the sections for the changed variable selection?  (In this case I selected a different cost center and as a result got a new list of employees)
    Thanks
    Ian

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • SSRS: "View Report" button doesn't refresh parameter dropdowns

    So many people have asked similar questions about why SSRS report parameters are not refreshed when "View Report" button is clicked and MSDN simply comes back with an answer "work as designed". It's a bad design, period.
    Here is my suggestion to Microsoft team who works on SSRS: either add a "Refresh Parameters" button at the end of the last parameter dropdown so users can force reload the parameter list, or add "Reload
    Report" after "View Report" button (which should be re-named "Refresh Report" more precisely) to allow user reload the entire report (as if it was Ctrl-F5 is pressed in I.E.), not just to refresh the main report dataset as "Review
    Report" button is currently doing.

    Hi Steve Liu,
    Thanks for your suggestion and you can also submit this suggestion at
    https://connect.microsoft.com/SQLServer/
    If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level
    of service provided.
    Thanks for your understanding
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • WebI report in Rich Client refreshing - But not in the webbased WebI client

    Dear experts,
    I am quite new to BO and I am currently facing the following problem regarding our WebI reports:
    I created a WebI report in the WebI Rich Client. This report accesses an OLAP universe, which in turn gets data from a SAP BW through a BI query. I also exported the report to the CMS. In InfoView, it is displayed correctly as well. The report displays the data alright.
    Now here comes the strange part of it: When refreshing the report from within the WebI Rich Client, the data is being updated (the current BW data is being shown) as it is supposed to. BUT when refreshing the report from within the WebI Java client (in InfoView), the report would not update, i.e. it would not display the current BW data but instead the old data. When scheduling instance creation the instances would also not display the current data.
    We are am running BO XI 3.1, no FixPacks.
    Does anybody have a clue why this is happening?
    Any hint would be appreciated.
    Many thanks in advance!
    Best,
    Kai

    Hi Ingo,
    Many thanks for your reply!
    The report would not refresh after I hit "Refresh data" ("Daten regenerieren" in German). Plus the newly created instances (one instance is being created every 5 mins) would also not show the current data.
    The funny thing is that as soon as I go back to the Rich Client and hit "Refresh data" in the Rich Client, the report would always show the current data, never the old ones.
    We should probably continue discussing in just one thread (Scheduled WebI report instances with differing values), this issue seems to be interrelated somehow anyway. Sorry for opening up multiple threads.
    Thanks and best regards,
    Kai

  • Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

    I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
    An error occurred while generating report:
    Object reference not set to an instance of an object.
    Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
    those circumstances.
    I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

    > Since I have to go through Edit to see the settings, and peruse the
    > entire massive folder of settings to try to identify the bad one, it has
    > been slow-going and I haven't found it yet.
    You can filter ADM templates to show configured ones only, and you can
    use the "show all settings" node. This will speed the work up - a little
    bit at least :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

    Hello,
    As you can tell from the title of this question, I am no expert with GPO's.  Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb".  While
    I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already.  That is not necessarily my case and I would ask for a
    little patience and a bit of 'hand-holding' for what I need.
    I run SBS 2011, and in Group Policy Management I have a custom GPO.  In this GPO I define all my settings.  I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings.  This
    policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03.  That may be the issue, but before making any changes I am seeking expert advice.
    When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
    I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified.  I see that my option for the location is set to "Default"
    which by my guessing would be located in the C:\Windows\sysvol directory.  Below is what I see there:
    C:\Windows\sysvol\domain
    C:\Windows\sysvol\staging
    C:\Windows\sysvol\staging areas
    C:\Windows\sysvol\sysvol
    I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
    But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
    To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry.  I searched my server for
    that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
    If I am correct with my assumption and basic knowledge, I should move all objects as follows:
    -Move FROM: C:\Windows\sysvol\domain\policies
    -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether. 
    Thank you for anyone's help and time with assisting me with this request.
    John Fester

    > top "Settings" I see the error: "An error occurred while generating
    > report: Object reference not set to an instance of an object."
    That's due to a security setting (most possibly) your current OS does
    not understand. Hard to find out wich exact setting it is... To resolve
    this issue, we need the gtpptmpl.inf file residing in the policiy's
    sysvol folder. To open this folder, edit the policy, move to computer
    settings - policies - windows settings - scripts - startup, press "show
    files". Then move two folders upwards and back down to
    .\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
    its contents and we'll have a look at it.
    > location, which I speculate is: C:\Windows\sysvol\domain\policies (which
    > folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
    That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
    > all objects as follows:
    > -Move FROM: C:\Windows\sysvol\domain\policies
    > -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    No.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Crystal Report Not Refreshing in browser

    Hi all,
    Am using crystal report for my web application so here am passing my parameter from jsp page
    but it is not refreshing
    For example
    I am select Month=jan my query goes this way.
    Select * from employee where month='jan' group by department order by designation
    when am intially design in eclipse in filter option am selecting 'jan' and when am running in browser am passing the same query with the parameter but here instead of 'jan' am passing month variable where my month variable changes every time according to user choose
    my crystal report is not getting refreshed ..
    hope u understood my problem
    Regards
    Vanishree.B

    Hi Tejomay ,
    I have tried that even after calling refresh() , it ;s not getting refreshed..but if am using signal table in my query  it is getting refreshed .but when am grouping with another table it is not refreshing..
    Regards
    Vanishree

  • Report does not refresh when link to page

    I have a report on page 1 with a column link to a report on page 2.
    The link sets items on page 2.
    If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
    If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
    I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
    The items on page 2 are select lists and text (always submit when enter pressed).
    How can I get the report on page 2 to auto refresh without the user having to click the Go button?
    Message was edited by: kgamble
    kgamble

    I can't post the pages (site reasons) but here's the debug.
    All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
    I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
    Any ideas?
    Thanks
    Kathryn
    0.00:
    0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
    0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
    0.02: alter session set nls_language="ENGLISH"
    0.02: alter session set nls_territory="UNITED KINGDOM"
    0.02: NLS: CSV charset=WE8MSWIN1252
    0.02: ...NLS: Set Decimal separator="."
    0.02: ...NLS: Set NLS Group separator=","
    0.02: ...NLS: Set date format="DD-MON-RR"
    0.02: ...Setting session time_zone to dbtimezone
    0.02: NLS: Language=en-gb
    0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
    0.03: ...Supplied session ID can be used
    0.03: ...Application session: 8392008407576157812, user=PENTESTER
    0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
    0.03: Session: Fetch session header information
    0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
    0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
    0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
    0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
    0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
    0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
    0.05: ...Metadata: Fetch page attributes for application 129, page 8
    0.05: Fetch session state from database
    0.05: Branch point: BEFORE_HEADER
    0.05: Fetch application meta data
    0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
    0.06: Clear cache: request=RP
    0.06: ...Resetting pagination for page
    0.06: Clear cache: request=8
    0.06: ...Clearing Cache for Page 8
    0.06: Nulling cache for application "129" page: 8
    0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
    0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
    0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
    0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
    0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
    0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
    0.08: Computation point: BEFORE_HEADER
    0.08: Processing point: BEFORE_HEADER
    0.09: Show page template header
    0.09: Computation point: AFTER_HEADER
    0.09: Processing point: AFTER_HEADER
    0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
    0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
    Home New Complaint
    Existing Data
    Logout |
    Complaints Complainants
    0.14: Region: Complainant Search
    Complainant Search
    0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
    SD Number
    0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
    0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
    NI Number
    0.16: Region: criteria_go
    0.16: Item: P8_GO BUTTON
    0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
    0.17: Region: Complaint Search
    Complaint Search
    The list of complaints must match ALL of these specified search criteria:
    0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
    Start
    0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
    End
    0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
    0.20: Item: P8_TARGET COMBOBOX
    Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
    0.22: Item: P8_RECUR COMBOBOX
    Recurrent? -- All -- YES NO
    0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
    Payments -- Select -- YES NO
    0.23: Item: P8_IDR COMBOBOX
    Type of Complaint -- All -- IDR Other Complaint
    0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
    0.23: Computation point: BEFORE_BOX_BODY
    0.23: Processing point: BEFORE_BOX_BODY
    0.25: Region: Complaints List
    Complaints List
    0.25: show report
    0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
    0.28: determine column headings
    0.28: activate sort
    0.38: parse query as: GENERAL1
    0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
    0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
    0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
    0.39: binding: ":P8_START"="P8_START" value=""
    0.39: binding: ":P8_END"="P8_END" value=""
    0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
    0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
    0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
    0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
    0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
    0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
    0.41: print column headings
    0.41: rows loop: 15 row(s)
    There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
    0.42: Computation point: AFTER_BOX_BODY
    0.42: Processing point: AFTER_BOX_BODY

  • SkillBuilders modal plugin - Reports will not refresh

    Hi all,
    I'm attempting to use the SkillBuilders Modal Page 2.0.0 plugin, everything seems to work except the refreshing of the reports. When clicking on the links the modal page opens, I can make changes, and after clicking on "apply changes" the modal box closes and I am back at the originating page, however the reports have not refreshed. If I manually refresh the page or the reports - the reports change as expected. I believe my problem is in the Auto Close Dynamic action, but I can't seem to find it. There isn't any errors displayed in the error console either. Any suggestions? Thanks in advance
    SkilBuilders Modal Page 2.0.0 plugin
    Apex version 4.2.1.00.08
    Theme 26 - Productivity Applications
    Page has 3 reports - 2 classic and 1 IR.
    Each report has a link with the class "edit-link"
    Dynamic action (Edit Clicked) is set up with:
    Event: click
    Selection Type: jQuery Selector
    jQuery Selector: a.edit-link
    Condition: No Condition
    Event Scope: Static
    True Actions settings are:
    URL Location: Attribute of Triggering Element
    Attribute Name: href
    Auto-close On Element Selector: section#uSuccessMessage
    Dynamic action (Modal Page Auto Close) is set up with:
    Event: Auto Close [SkillBuilders Modal Page (2.0.0)]
    Selection Type: DOM Object
    DOM Object: document
    Condition: No Condition
    Event Scope: Static
    3 True Actions settings are:
    Action: Refresh
    Selection Type: Region
    Region: "Name of Region"
    Thanks
    Wayne

    Hi Wayne,
    You've got a job on trying to refresh a classic report using the standard dynamic action, it's not as straightforward as simply selecting the region.
    The fastest way to achieve this (unless you MUST have AJAX refreshing of reports) is to change the action of the Auto Close event to Submit Page.
    It's quick and dirty - but it works.
    Hope this helps, cheers, Pete

  • Crystal Report Server XI Report recurring instances do not work. Logs?

    I have scheduled a report to be run every morning, and each instance return status is "success". However, I encountered the following problem when I try to view instances of the report: There is a long time period of waiting (seems to be waiting for some kind of timeout), and then eventually the message: "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
    I also noticed that in event viewer (windows server 2003) I see many failure audits to login to the sql database, and the events contain the login used in my data source.
    It's interesting to note, that when I run a single instance of the report "Now" there is no problem.
    Some info about the report which may be relevant:
    The report uses 2 formula fields to auto-parameterize 2 of the 5 parameters used by a subreport. The other 3 subreport parameters are set when scheduling the report.
    The subreport uses a call into a stored procedure in a MS SQL server 2005 database to retrieve its records.
    The 2 fields which are parameterized are datetime fields (StartTime, EndTime), and the main report is basically just a wrapper to only show the previous day.
    JDBC data source to local Sql server instance.
    Also, the crystal report server XI install uses the same sql server instance to store CMS data under a separate database.
    I'm stumped on this.
    Has anybody encountered this problem?
    Is there a simpler way to auto-parameterize the report?
    Why are the failure audits occurring when I view the instance of the report? Is this because the instance is setup to use RPT output format?
    Are there logs I can look into aside from event viewer? I can't find anything that looks relevant under program files, but perhaps I missed something.
    The failure audits would make more sense to me if it occurred with the other report instances, but some instances are shown correctly, and some just do this timeout thing.

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek

  • SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
    So consider using IE as workaround.
    Also please refer:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
    Workaround here:
    http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
    -Vaibhav Chaudhari

  • Report Instance not getting started in Oracle Fusion Middleware 11g Report

    Hi
    Report Instance not getting started in Oracle Fusion Middleware 11g Report Instance Error
    Rep-50125 Java.lang.nullpointerexception
    I just installed Oracle Forms,Reports 11g 11.1.1.3.0 in my machine
    Even I started opmnctl(Oracle Process Management Control). Its too running fine.
    Please Guide me the settings need to do to start the report instance.
    Regards
    Murali N S

    Hello,
    Copy rwlpr.exe from Oracle_Home\bin to Oracle_Instance\config\reports\bin
    Regards

Maybe you are looking for