Report  intermittently not printing in HP printer

Hi All,
We are currently facing an issue printing a report in HP printers.
We have a report developed in oracle report 6i and this report is in pdf format and registered in oracle apps 11.5.4.
There are few occassions where running this report (thru concurrent manager) doesn't print to HP printers but the concurrent program finishes successfully (completed - normal in view concurrent request) and the log says that the program has been executed successfully without error and output is being printed on the printer but in contrary nothing is actually printed.
The output is being produced and can be viewed in the view concurrent request screen and when you reprint it still nothing appears on the printer.
We just notice that the HP printer flashes its lights, as if something is being printed, and finishes with nothing on the printer as well as in the printer server queue.
Please note that this behaviour is intermittently happening in HP printer but not in other printers. Before, we are using Lexmak printer and this problem is not being encountered.
Has anybody faced similar issue with HP printer before? or anybody could give us a hint on why this is hapenning?
Any thoughts would be greatly appreciated.
Brett
brettcowie

Hello andreatf, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing ink issues.  I would like to help.
I would recommend performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on Troubleshooting Print Quality Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Where define a report does not go directly to printer ?

    Hi
    I have a program wich generates a report list in screen. When this program is executed in job (batch) for one user, the report is automaticaly sended to printer.
    Where is this configured ? If the user has a configuration so his reports are automaticaly printed ; is there a way in the program to define the report does not be sended to the printer until the user manually send it ?
    Thanks a lot.
    Frank

    Hi,
    In the user settings he might have configured to have output immediately..
    in the menu ...System -> user profile -> own data..
    In the Defaults tab in the output controller section...you have a check box which says output immediately..
    Please check the same in that user if the output immediately is set..
    THanks
    Naren

  • Report headers not included in "easy print vi panel or documentation"

    I am using the easy print vi panel or documentation function from the report generation toolkit.  I've wired in a cluster constant into the layout options terminal.  I selected include headers and turned on page number and date printed from the boolean options.  The headers are included when I run the program in labview but when I try to build an executable it prints without the header.
    I included the dynamic VI's that the toolkit suggested when I built the file but I'm still seeing this issue.

    Hi Linkster,
    Looking at that example VI, it seems
    that outputting the name, path, and date is relatively easy compared to
    the page number. It does not seem that there is a VI that outputs the
    number of pages, and VI property nodes only seem to have the ability to
    set the header to contain the page number. There is a property node
    that gives the size of your front panel and block diagram, but you may
    have to relate that information to number of pages on your own.
    Regards,Stephen S.
    National Instruments
    Applications Engineering

  • AR aging report does not print alphabetically by customer name in 8.8

    AR aging report does not print alphabetically by customer name in version 8.8.
    It is possible to create a custom layout for the receivables aging summary report (to print alphabetically by BP name) to overcome this problem. However, itu2019s not possible for the u201Cdetailed receivables aging reportu201D or u201Ccustomer statement reportu201D.
    Why has SAP changed this functionality? In version 2007 SAP takes the order of the rows set on the screen unless other order is specified in the layout.
    How can we make the u201Cdetailed receivables aging reportu201D and u201Ccustomer statement reportu201D print alphabetically by customer name?
    Steps to reproduce:
    Business partners > Business partner reports > Aging > customer receivables aging
    Doubleclick on customer name to sort it in alphabetical order.
    Click on preview and select u201Creceivables aging summary reportu201D.
    The system layouts do not print by customer name in alphabetical order.
    Click on preview and select u201Cdetailed receivables aging reportu201D. The system layouts do not print by customer name in alphabetical order.
    Also, customer statement report does not print by customer name in alphabetical order.
    In SAP 2007 versions, when a marketing document or aging report is printed, SAP takes the order of the rows set on the screen unless other order is specified in the layout.
    In SAP 8.8 although it works the same way for marketing documents, it doesnu2019t work like this for Aging reports.
    I was able to change the order for the u201CReceivables Aging Summary Reportu201D only.  We cannot overwrite a System report, I had to create a new layout called:  u201CBusiness Partner Aging (Summary) (Alphabetically Sorted)u201D.
    I couldnu2019t set up the order based on BP Name for the other 2 options: Detailed Receivables Aging Report and Customer Statement Report (One page per Customer).
    Iu2019ve checked print settings and properties, and I donu2019t see any way of changing the default order for these reports.

    Reported it to SAP support + they plan to fix it in a future patch.

  • Web Analysis report is not coming with the border/logo/heading while print

    Hi All,
    I am using 9.3.1 version of hyperion planning were Web Analysis report is not coming with the border/logo/heading while printing with the option "print all object", Only the data grid is coming in the print. If I use "print screen" it is coming with border/logo/heading but it gives a screenshot of the report, that won't cater out need.
    So please suggest us with a resolution to have border, logo and heading, while using Print all object.
    Thanks with regards....
    Rao

    Hi Sagar,
    In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
    Thanks
    Phani

  • Print report does not work in built mode (LV7.1+XP)

    Good morning,
    I've read some threads about the topic in this Q, but no solution. So my hope is that NI has resolved the problem. Here it goes:
    In normal edit mode I can use the Print Report.vi (using the default win printer) to print out some data. The generated report is a standard NI report (that is NOT HTML).
    When building an application this no longer works. No data is passed to windows (the printer icon in the system tray never appears) - and hence no output on the printer!
    I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet but I've also tried using the old stable Canon LBP 8 II on the FILE: port - but in .exe mode the file box does not appear.
    I really hope that NI has a solution
    for the problem since we need the built application on several client. And we do not want to pay for several LV licenses.
    Speculations on both the application builder and report generation tools have been given in previous threads... However, these gave no solution and all threads are from before LV7.1.
    Thanks in advance!
    Martin

    Skinny wrote:
    > In normal edit mode I can use the Print Report.vi (using the default
    > win printer) to print out some data. The generated report is a
    > standard NI report (that is NOT HTML).
    >
    > When building an application this no longer works. No data is passed
    > to windows (the printer icon in the system tray never appears) - and
    > hence no output on the printer!
    >
    > I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet
    > but I've also tried using the old stable Canon LBP 8 II on the FILE:
    > port - but in .exe mode the file box does not appear.
    >
    > I really hope that NI has a solution for the problem since we need the
    > built application on several client. And we do not want to pay for
    > several LV licenses.
    Are you sure you checked the "NI R
    eport Support" under the Advanced
    button of the Installer tab in the application builder?
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Print Button of SSRS report is not display report in IE11

    Hello All,
    We are running on SSRS 11.0.0.0, .net framework 4.5, SQL server 2012. 
    Everything is working fine in IE9, IE10, now our client has updated their browser to IE11. In IE11 the print button in SSRS report is not showing. We have tried browser file,
    it will show print button in IE11 but it is not functional. we  have also tried to change browser mode to IE 10 or IE 9 (using <meta http-equiv="X-UA-Compatible" content="IE=8" />) but it didn't work in IE 11.
    Some forum suggested to change framework to 4.5.1 but i
    cant change framework now. so please suggest some alternatives to achieves the functionality.  

    Hello Pinakin,
    I recommend that you post your question in SSRS or IE related forums.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • PDF printing--tomcat/cocoon installed, but report server not found------

    As I understood, APEX 3.1 requires either BI/FO tools to enable PDF printing.
    As I do not have BI license, and as I happened to check a very good link on a blog which had a detailed viewlet on apache-cocoon route for PDF print enabling, I downloaded the tomcat, cocoon source files, built the cocoon .WAR, put it in required place as instructed, started tomcot (ran into pronblems because of port conflits, resolved these by configuring different ports for 8005 and 8080 ports).
    Now, when I want to configure the external report server, I am stuck.
    I am not able to locate 'Instances' tab, or 'manage environment settings ' tab in 'manage services'
    I am able to find only following tabs in 'manage services' under HOME.--> Administration ----> Manage services
    1) session state
    2) caching
    3) workspace preferences
    4) applications
    5) workspace
    6) workspace schema reports
    7) Logs
    Can anyone help me to find out where to configure the 'report server' now?
    Thanks,
    suresh.

    Sorry, it was a silly problem:) You have to be logged in as admin to 'see' the 'instances' tab. maybe in all the tomcat/cocoon build/config issues, this simply got off my head!
    now, the problem of print server config is over, I have configured the same. the 'print' link is available now in report region, when I run the report. but when I click the 'print' link, it is taking ages...or rather it is still processing...!!
    Can anyone please point out to me now what is the problem...?
    thanks.

  • My report will not print

    hp psc 1350 all in one  MY3CCBC14Z
    Windows 7 64-bit
    printer problem
    installing printer to use with my lap top
    not printing any reports

    Hi acombs7162,
    When you say your printer will not print any "reports", do you mean it won't print anything? Are you getting any error messages, if so, what are they? Any extra information you can provide may help with a solution.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Printing an ABAP report does not work

    I am starting to learn ABAP programming, i have a simple report:
    REPORT  Z_ABAP.
    NEW-PAGE PRINT ON IMMEDIATELY `X'.
    WRITE: /'Test printing'.
    FORMAT COLOR OFF INTENSIFIED OFF.
    WRITE: /.
    WRITE: 'Hello World' NO-GAP.
    WRITE: /.
    I defined an output device with properties "YSWIN (Rel.4.x/SAPlpd 4.09 + ONLY!)" and  "G: Frontend Printing with Control Tech", the printer name is __default.
    I print the above report via "Program" > "Print", nothing is printed, i check my local printer, no print job there.

    Hello,
    Can you share with us the solution of this issue.
    Also please help to close this thread as it was solved.
    Thanks.
    Regards,
    David

  • CUPS not recognizing Epson USB-Printer

    I'm trying to get an Epson Stylus Office Box BX300F to work with Arch x86_64.
    I have followed the CUPS wiki page closely and have installed everything it told me to.
    When i connected to http://localhost:631/admin and clicked 'add printer' the USB printer was not listed. dmesg however showed me that the printer is at least recognized to some extent:
    [ 2295.813154] usb 2-1: new high speed USB device number 6 using ehci_hcd
    [ 2295.951540] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
    [ 2297.177498] usb 2-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
    I tried blacklisting usblp, but then, after rebooting, it got not recognized at all, so i undid that.
    Then i found the printer in the openprint db (link), found the driver that is listed as working perfectly there in the AUR (link) and installed that package. But it doesn't seem to help at all, CUPS still doesn't list any USB printer. I've included the full section of /var/log/cups/error_log with loglevel=debug, hope it helps. Any suggestions on how i can get the printer working are greatly appreciated.
    cupsd restarted at 20:31:19 ; i refreshed http://localhost:631/admin at 20:31:24 ; and i clicked 'add printer' at 20:31:30
    I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 (IPv6)
    I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 (IPv4)
    I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock (Domain)
    I [05/Jul/2011:20:31:19 +0200] Remote access is disabled.
    D [05/Jul/2011:20:31:19 +0200] Added auto ServerAlias klapptop
    I [05/Jul/2011:20:31:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
    I [05/Jul/2011:20:31:19 +0200] Using default TempDir of /var/spool/cups/tmp...
    I [05/Jul/2011:20:31:19 +0200] Configured for up to 100 clients.
    I [05/Jul/2011:20:31:19 +0200] Allowing up to 100 client connections per host.
    I [05/Jul/2011:20:31:19 +0200] Using policy "default" as the default!
    D [05/Jul/2011:20:31:19 +0200] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.ipp4...
    D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
    D [05/Jul/2011:20:31:19 +0200] cupsdMarkDirty(---p--)
    D [05/Jul/2011:20:31:19 +0200] cupsdSetBusyState: Dirty files
    I [05/Jul/2011:20:31:19 +0200] Partial reload complete.
    I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 on fd 3...
    I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 on fd 6...
    I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock on fd 7...
    I [05/Jul/2011:20:31:19 +0200] Resuming new connection processing...
    D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
    D [05/Jul/2011:20:31:19 +0200] Discarding unused server-restarted event...
    D [05/Jul/2011:20:31:19 +0200] PID 1508 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:20 +0200] Report: clients=0
    D [05/Jul/2011:20:31:20 +0200] Report: jobs=2
    D [05/Jul/2011:20:31:20 +0200] Report: jobs-active=0
    D [05/Jul/2011:20:31:20 +0200] Report: printers=1
    D [05/Jul/2011:20:31:20 +0200] Report: printers-implicit=0
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-string-count=859
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-alloc-bytes=9192
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-total-bytes=17984
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 11 from localhost:631 (IPv6)
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin/?OP=redirect HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: Authorized as root using Basic
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[1] = "OP=redirect"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[31] = "REQUEST_METHOD=GET"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[32] = "QUERY_STRING=OP=redirect"
    D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1509)
    I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1509)
    D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
    D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
    D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f1f946405c0
    D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] redirecting with prefix http://localhost:631!
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
    D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
    D [05/Jul/2011:20:31:24 +0200] Script header: Location: http://localhost:631/admin
    D [05/Jul/2011:20:31:24 +0200] Script header:
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:24 +0200] PID 1509 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "REQUEST_METHOD=GET"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "QUERY_STRING="
    D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1510)
    I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1510)
    D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
    D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
    D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f7248b935c0
    D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] No form data, showing main menu...
    D [05/Jul/2011:20:31:24 +0200] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 POST / HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 1.1 Get-Subscriptions 1
    D [05/Jul/2011:20:31:24 +0200] Get-Subscriptions ipp://localhost/
    D [05/Jul/2011:20:31:24 +0200] Returning IPP successful-ok for Get-Subscriptions (ipp://localhost/) from localhost
    D [05/Jul/2011:20:31:24 +0200] Script header: Content-Type: text/html;charset=utf-8
    D [05/Jul/2011:20:31:24 +0200] Script header:
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
    D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:24 +0200] PID 1510 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 11 POST /admin/ HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Basic
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "REQUEST_METHOD=POST"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[33] = "CONTENT_LENGTH=60"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[34] = "CONTENT_TYPE=application/x-www-form-urlencoded"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1511)
    I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1511)
    D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 11 file=13
    D [05/Jul/2011:20:31:30 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] [CGI] http=0x7f2a6b99e5c0
    D [05/Jul/2011:20:31:30 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] op="add-printer"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Getting list of devices...
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
    D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username=""
    D [05/Jul/2011:20:31:30 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [05/Jul/2011:20:31:30 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Local
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
    D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username="root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[1] = "1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[2] = "0"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[3] = "5"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[4] = "2"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[5] = "requested-attributes=all"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Local"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "CONTENT_LENGTH=88"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1512)
    I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1512)
    D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 14 file=15
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 1513)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 1514)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 1515)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1516)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1517)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 1518)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 1519)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 1520)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 1521)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 1522)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1523)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-pdf (PID 1524)
    D [05/Jul/2011:20:31:30 +0200] [CGI] list_devices
    D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_busses=6
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 1525)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 1526)
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Setting locale failed.
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Please check that your locale settings:
    D [05/Jul/2011:20:31:30 +0200] [CGI] LANGUAGE = (unset),
    D [05/Jul/2011:20:31:30 +0200] [CGI] LC_ALL = (unset),
    D [05/Jul/2011:20:31:30 +0200] [CGI] LANG = "de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] are supported and installed on your system.
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Falling back to the standard locale ("C").
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 1527)
    D [05/Jul/2011:20:31:30 +0200] Script header: Content-Type: application/ipp
    D [05/Jul/2011:20:31:30 +0200] Script header:
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "http"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "socket"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "smb"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "beh"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "cups-pdf:/"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1514 (socket) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1516 (mdns) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1518 (smb) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1520 (beh) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1524 (cups-pdf) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "lpd"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1513 (http) exited with no errors.
    E [05/Jul/2011:20:31:30 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
    E [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1521 (dnssd) stopped with status 1!
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1525 (parallel) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1522 (scsi) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "scsi"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1526 (bluetooth) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1519 (lpd) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "ipp"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1527 (ipp) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1523 (serial) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_devices=9
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1517 (usb) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] [cups-deviced] PID 1515 (snmp) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] PID 1512 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] [CGI] Got device list!
    D [05/Jul/2011:20:31:32 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:32 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:32 +0200] PID 1511 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] Script header: Content-Type: text/html;charset=utf-8
    D [05/Jul/2011:20:31:32 +0200] Script header:
    D [05/Jul/2011:20:31:32 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    I [05/Jul/2011:20:31:50 +0200] Generating printcap /etc/printcap...
    D [05/Jul/2011:20:31:50 +0200] cupsdSetBusyState: Not busy
    D [05/Jul/2011:20:32:02 +0200] cupsdReadClient: 11 WAITING Closing on EOF
    D [05/Jul/2011:20:32:02 +0200] cupsdCloseClient: 11

    I have gotten around to give this printer another try and when i connected it and read through /var/log/cups/error_log i noticed 2 lines close to the end that seem to be the problem:
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
    i checked the permissions, but they seem to be allright:
    $ ls -l /dev/bus/usb/002/006
    crw-rw-r--+ 1 root scanner 189, 133 24. Aug 12:42 /dev/bus/usb/002/006
    $ id
    ...,7(lp),10(wheel),96(scanner),97(camera)
    here is the complete part of error_log from connecting the printer:
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] Report: clients=1
    D [24/Aug/2011:12:42:23 +0200] Report: jobs=2
    D [24/Aug/2011:12:42:23 +0200] Report: jobs-active=0
    D [24/Aug/2011:12:42:23 +0200] Report: printers=1
    D [24/Aug/2011:12:42:23 +0200] Report: printers-implicit=0
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-string-count=859
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-alloc-bytes=9192
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-total-bytes=17984
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
    D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: No authentication data provided.
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
    D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username=""
    D [24/Aug/2011:12:42:23 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [24/Aug/2011:12:42:23 +0200] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
    D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: Authorized as root using PeerCred
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
    D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username="root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[1] = "1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[2] = "0"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[3] = "2"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[4] = "2"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[13] = "USER=root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1501)
    I [24/Aug/2011:12:42:23 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1501)
    D [24/Aug/2011:12:42:23 +0200] cupsdSendCommand: 12 file=14
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1502)
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1503)
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1504)
    D [24/Aug/2011:12:42:23 +0200] [CGI] list_devices
    D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_busses=6
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1504 (serial) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1502 (mdns) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_devices=9
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1503 (usb) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] PID 1501 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] Script header: Content-Type: application/ipp
    D [24/Aug/2011:12:42:23 +0200] Script header:
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    i found a related thread ( https://bbs.archlinux.org/viewtopic.php?id=110477 ) but that deals with digital cameras, so it doesn't really help me. Other forum threads i found about libusb permission errors were mostly people that forgot to add themselves to lp and the like. Does anyone know why i get the permission errors and how i can fix it? Any help is greatly appreciated!

  • Printed front panel graphics quality (Print Panel to Printer method vs. Append Front Panel Image to Report.vi)

    LV 6.02 (or 6.1)
    NT 4.0
    I have a vi that the front panel includes all the information I need to print except that it is on different pages of a tab control to conserve screen space. I was attempting to programatically cycle the value of the tab control in a For loop and invoke the Print Panel to Printer method to print 7 pages of the front panel, each with a different tab page selected. The printouts were excellent quality but beginning with the second consecutive Print Panel to Printer method the on screen front panel image of the VI being printed would become jumbled (sometimes, by the time 7 printings were done, the entire front panel image would disappe
    ar and a bitmap of the desktop or underlying windows would be visible in the VI's panel frame) yet the subsequent Print Panel to Printer methods continued to print the panel as they should appear. The visible front panel graphics would never return to normal and the only solution was to close the vi (in the dev system) or exe (compiled) and re-launch. I tried a lot of things (like hiding the panel to print before printing and showing it after printing) with no luck. It appears that two or more of these consecutive invoke methods caused the problem regardless of whether the tabs were cycling, or even if there was no tab control and much fewer controls on the panel to be printed than normal. I also had the same problem with LV 6.1.
    Finally, I was forced to switch to the report generation toolkit vi's, I cycle through the tab pages and use the Append Front Panel Image to Report.vi to append each image to the report. This is faster and control returns to my program quicker but I a
    m unhappy with the printed quality of the graphics of the front panels. They are not as high of resolution as those generated via the Print Panel to Printer method.
    Any suggestions?

    You might try changing the way the VI is printed by going to tools >> options >> printing. Try the postscript and bitmap settings.
    Jeremy

  • Attribute "Report Layout" is missing in the "Print Attributes" tab for IR

    Hallo,
    The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
    How to alter the report layout (xsl-fo) of an interactive report?
    Has someone any idea where to configure this?
    Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
    "If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
    http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
    How can the "default XSL-FO layout" be changed?
    Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
    "fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
    http://www.w3.org/TR/xsl/#fo_region-before
    The default report layout is not saved in:
    select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
    Thx, Willi

    I've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
    1, Use an application process to set your custom layout for interactive reports:
    [ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
    [ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
    declare
    v_xsl varchar2(32767);
    begin
    v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
    <xsl:stylesheet version="2.0"
      <fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
      <fo:region-before region-name="region-header" extent="54.0pt"/>
    </xsl:stylesheet>';
    APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
    end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
    The code depends on the solution you are using to parse the xsl string.
    Hope this may help someone,
    Willi

  • How to print directly to Printer from Crystal Report Viewer ?

    Hi All,
    We are integrating our Java Web Application with Crystal report XI, currently using JRC and export to PDF for user to preview and print to local printer.
    Now there is new requirement :
    Some clients is using thin client terminal (no harddisk, only has OS +Browser in ROM), so I cannot install Acrobat Reader for them to preview&print the report.
    So I am looking at  Crystal Report Viewer, the question is : Can I print from Crystal Report Viewer directly to local printer without first converting it to PDF (because I can't have acrobat reader installed) ??
    Thank you very much,
    Krist
    Indonesia

    Hi,
    It can't be achieved through XI.
    JRCXI R2 SDK offers the ability to print the report server side
    using the PrintOutputController using printReport(PrintReportOptions printReportOptions) method.
    Here is the code(for XIR2):
    import="com.crystaldecisions.reports.sdk.*"
    import="com.crystaldecisions.sdk.occa.report.lib.*"
    import="com.crystaldecisions.sdk.occa.report.document.*"
    try {
    final String REPORT_NAME = "Inventory.rpt";
    ReportClientDocument reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(REPORT_NAME, 0);
    //Create and set print options.
    PrintReportOptions printOptions = new PrintReportOptions();
    //Note: Printer with the 'printer name' below must already be configured.
    printOptions.setPrinterName("
    10.10.45.220
    BOBJ 2C");
    printOptions.setJobTitle("Sample Print Job from JRC.");
    printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
    printOptions.setPaperSource(PaperSource.auto);
    printOptions.setPaperSize(PaperSize.paperLetter);
    printOptions.setNumberOfCopies(1);
    printOptions.setCollated(false);
    PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
    printOptions.addPrinterPageRange(printPageRange);
    //NOTE: If parameters or database login credentials are required, they need to be set before.
    //calling the printReport() method of the PrintOutputController.
    reportClientDoc.getPrintOutputController().printReport(printOptions);
    reportClientDoc.close();
    out.println("Successfully sent report to the printer.");
    catch(ReportSDKException ex) {     
         out.println(ex);
    Please revert in case you have any query.
    Thanks,
    Neeraj

  • RSPC Variant does not exist - Could not find or load print parameters

    We are on BI 7.0 (support pack SAPKW70017).  We recently freshed test system from production.   After the refresh, we have problems opening all the process chains.  
    1. When I go to RSPC to open a process chain, I get many messages like this:
    Variant &0000000067180 does not exist (there are different variant numbers)
    Message no. DB612
    Diagnosis
    You selected variant &0000000067180 for program RSPROCESS.
    This variant does not exist.
    2. When I go to SM21 to check the system log, it displays many entries like below:
    EJ  F Could not find or load print parameters for step 1, job BI_PROCESS_TRIGGER/09134500
    Documentation for system log message EJ F :                                                                               
    An error occurred during loading of the print parameters for a        
    background job step.                                                  
    The print parameter record may have been deleted even though there was
    a still a step that needed that data. This is an error as the         
    reorganization of the print parameters should prevent this from       
    happening.                                                            
    To fix the problem, edit the step and save it, copy the job, or       
    schedule a new job. The print parameters will be regenerated in all   
    these cases.    
    3. I applied the OSS note 1169659 - Correction: Process variants not entered by BDLS.   The Basis rerun BDLS.  But it did not fix the problem.
    Would appreciate if someone could provide any help.
    Thank you.

    Hi Rebecca.
    1) Please verify if exist process types called 'unknown job'. If exist:  delete process types called 'unknown job' in your process chain. To do that please remove the chain from scheduling (menu bar > process chain > remove from schedule), afterwards switch the detail view on (menu bar >  view) > right mouse click on the process type "unknown job" > displaying scheduled jobs > delete that job. After deletion of the 'unknown jobs' activate and schedule your process chain again.
    2) After the removal of the 'unknown jobs' please check if the error messages with the missing variants pop up when calling your process chain disappears. If not, please implement and execute the attached report Z_FIND_JOBS_WITHOUT_VARIANT which deletes the jobs without variants.
    I have already attached report as Report Z_FIND_JOBS_WITHOUT_VARIANT, you can download and create the report accordingly.
    = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
    REPORT  Z_FIND_JOBS_WITHOUT_VARIANT.
    data: l_t_job type table of tbtcp with header line,
          l_s_varsel    TYPE rsvar,
          l_t_variant   TYPE TABLE OF rsparams.
    parameters: delete type rs_bool.
    select * from tbtcp as job into table l_t_job
                        where progname = 'RSPROCESS'
                        and   exists ( select * from tbtco
                              where jobname = job~jobname
                              and   jobcount = job~jobcount
                              and   status = 'S' ).
    loop at l_t_job.
      l_s_varsel-report  = l_t_job-progname.
      l_s_varsel-variant = l_t_job-variant.
      CALL FUNCTION 'RS_VARIANT_CONTENTS'
        EXPORTING
          report               = l_s_varsel-report
          variant              = l_s_varsel-variant
          execute_direct       = 'X'
        TABLES
          valutab              = l_t_variant
        EXCEPTIONS
          variant_non_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      if sy-subrc <> 0.
        write: / l_t_job-jobname, l_t_job-jobcount.
        if delete = 'X'.
          CALL FUNCTION 'BP_JOB_DELETE'
            EXPORTING
              JOBCOUNT = l_t_job-jobcount
              JOBNAME  = l_t_job-jobname
            EXCEPTIONS
              OTHERS   = 1.
          IF SY-SUBRC <> 0.
            write 'not deleted'.
          else.
            write 'successfully deleted'.
          ENDIF.
        endif.
      endif.
    endloop.
    = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
    I hope I can be helpful.
    Thanks,
    Walter Oliveira.

Maybe you are looking for

  • Ipod touch won't play movies or songs w/album covers

    Hi all - Before I left for a very long trip I downloaded a bunch of tv shows, movies and songs from itunes on a 32G ipod touch. I also was asked to update the software to 2.1 - which I did. Prior to this, everything worked great!! I even had a movie

  • Ipod dock sync problems into G5 / works with Cinema Display

    after buying a new printer i had to reshuffle my usb and firewire arrangements, so i moved the ipod photo dock to the usb port on the back of my G5...before it was going into the back of my apple cinema display's usb port. now, i get the (-36) messag

  • I just updated to the IOS5 and lost ALL contacts

    I just upddated to the IOS5 and it told me to transfer my purchases to my itunes, which i did. I then installed IOS5 to my iphone 3gs. And followed the on screen prompts on the phone. But upon Exploring i found ALL my contacts were gone. Any ideas? D

  • 'select expert' option is not filtering data in CR, in VS2012

    ,Hi, We have a VB  VS2005 crystal report application , is working good with ' select expert ' option for filtering data in side crystal report. When we are migrated the application to VS2012, the application is not filtering the data inside crystal r

  • What is the function module which uploads excel file data into tcodes

    Hi, i want to upload data in cs01 tcode. but data is excel sheet while i am trying to use gui_upload it is not being possible for me to upload data. can any one tell me what is the function module? can any send me the steps how to uplaod data if it i