Report is being generated but nothing show
Hi, there was no error in the data tool, I can run and see the expected results in the tool but nothing shows in the reporting server.
Hi sdnd2000,
Glad to hear your issue have been resolved and thanks for your sharing of the informarion.
If you have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support
Similar Messages
-
My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone
Hello transcend94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
Best of luck,
Mario -
When user clicks on "Like Button," the counter increases but nothing shows up showing the user recommends my site to their friends. What did I do wrong?
I used the iframe code from Facebook's "Like Button" site; and inserted the code in the html widget popup box, then positioned it where I wanted it on my page and published. It looks fine (though I had to add "http" before my url to get it to show up).
So, when a user clicks on button, a pop-up opens asking for Facebook password. When I (the user) enter a password, nothing happens after that. I thought the idea was that a user would be able to show their friends that they like my website. After I entered my password in pop-up after clicking on "Like" I went to my facebook page (a company page) to see if it showed that I (the user that clicked on "Like" on iweb) recommended the website. But nothing showed up. I thought maybe it was because Facebook associated my password as the admin for the Facebook page so didn't count it. But a friend tried it and same thing happened. I went back and on one page I put in another facebook code for a combo Like/Send button. It shows up but acted the same as the regular Like button.
Questions:
1. Is this the way the Like Button is suppose to work? Only benefit of Like button being that it just counts the clicks on the Like button and does NOT let users share their recommendation with their friends?
2. If it's suppose to let users share their "Likes" with their friends, what did I do wrong? There were three types of code but in reading discussions, they all say to use iframe. (I used the first choice which I think was html for Javascript SDK and put that in my HTML Snippit box and the Like/Share button showed up on my iweb page next to the facebook icon and the words "likes this" but when I click it, I don't see instructions that it's sending my recommendation to my friends.)
I must have done something wrong, but can't figure out what. Does anyone know? If the only benefit of the Like Button is the counter, it doesn't seem worthwhile.
Thanks to anyone who can figure this out! My website is couponsforfun.comYou want something like this?
http://home.wyodor.net/demoos/facebook/
The send button sends the link to their friends in the address field with a message.
They recieve a message in the inbox.
There's no post on a page.
If they want that, then they should share the link themselves.
Perhaps it's best to study what facebook has to offer and how it works instead of guessing what it is supposed to do and be disappointed. -
"The report is being generated. Please try again later. " for last 4 hours
Hi,
I am try to check the report function which the azure portal has for Azure Active Directory Premium. However, it's showing "The report is being generated. Please try again later." everywhere for
4 hours already.
Is there anybody can help me to figure it out what's happen? Maybe I miss something?
Thanks!
KevinHello,
Since we have not heard back from you we are archiving the thread.
Please let us know if you are still facing the issue.
Regards,
Neelesh -
Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Does the iPod charge?
Have you tried another cable?
Another computer to help determine if you have an iPod or computer problem? -
I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?
What do you mean by "HD to VGA adapter converter"?
Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work -
# Question
It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
Does anyone have any ideas or suggestions?
How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''See:
*https://support.mozilla.com/kb/Downloads+window
*Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history" -
it says it backed up and synced but nothing shows up in my itunes library!! please help!
Transfer your iTunes library from your old computer to your new computer per the instructions included with this link - along with your photos, documents, and any other important data you will need or want to access on your new computer.
http://support.apple.com/kb/HT1751 -
Earlier today my bookmarks were there. Later tonight, not there.
I've tried the whole restore bookmarks process, I've copied the folder and deleted the places file thing. None of that has worked.
What's weird is if I type something in in the URL box that I know is in my bookmarks, it will show up like it's in the history. But nothing shows up in my bookmarks folder at all.
I need some help on this as I've tried almost every way I've read and nothing has brought them up. And like I said in the title, I have over 800 bookmarks and a lot of them are work related.Another user had a similar problem a couple of days ago, but was fortunate to have a backup of places.sqlite to restore. See: [https://support.mozilla.org/en-US/questions/981306 Invisible bookmarks].
When you deleted places.sqlite file and Firefox regenerated your database, it presumably used the most recent backup. I wonder whether the most recent backup contains the same mysterious corruption. Do you want to try recovering from the next older one?
In your profile folder, after exiting Firefox, open the bookmarkbackups folder and move the most recent JSON backup file(s), anything from today, to a safe location (e.g., your Documents folder). Then go back up a level and rename places.sqlite to something like places.wtf.
''Note: if Windows does not display these file extensions, turn on viewing of file extensions to ensure that you can work with similarly named files accurately. This article has the steps: [http://support.microsoft.com/kb/865219].''
When you start Firefox, it should rebuild the places database again, this time with that older backup. Any difference? -
It says I can drag Pages documents from iMac to iCloud. But nothing shows up.
Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.yes is tehre another way
the directions do not explain anything other than drag
or use the little action wheel menu -
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks
The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Some water got on my iPod touch 4th generation and when plugged into iTunes it is recognized but nothing shows up on the screen. Does this mean that I need to replace the LCD screen?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 if a 64 GB one and $99 for the others. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
My HP Envy h8-1417c Powers up, but nothing shows up on the screen
When I power up my Envy the green light comes on, everything sounds the way it normally does, but nothing appears on the screen. This has happened before but I didn't address it at the moment, went out of town and returned with it working just fine. Not sure what the problem can be. Please help!
Thanks
Martell Parker
[Personal Information Removed]Hello @sirmartell09,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer powers up, but nothing shows up on the screen, and I would be happy to assist you in this matter!
To restore your desktop's power functions once again, I recommend following the steps in this document on Computer Starts but Screen Remains Blank (Windows 8).
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
oops, I tried to download the previous version and it won't let me, so I tried to reinstall 4, it downloads but nothing shows up to extract the file
I'm having the same issue. Lion is up to date with v10.7.2. Currently running iTunes 10.4. Tried installing the regular way...un-installing, re-installing...re-downloading from internet...dragging the install into iTunes icon on dock...I'm perplexed. Every time I plug in iPhone or iPad, it tells me there's an update available - when I click to update, it's the same thing - then the software update utility keeps stating that all software is up to date. Sigh...I feel as though I'm chasing my tail.
Hopefully, there are answers out there! iOS 5 is so cool!!!
Maybe you are looking for
-
[solved] tmux rebinding prefix doesn't work?
Hi everybody, I decided to try tmux out, so I installed it and played around with it abit ... okay, it's pretty neat, but I've got to bind the keys to the same way I bound them for screen or I will go insane, so copy and paste, from the man page: Com
-
How to display the price of a Bundle??
Hi, I created a Bundle with two skus Using Product lookup Droplet i'm able to see the sku present inside the bundle. I want to retrieve the prices associated with these skus using Price List Manager. public class BundleCustomDroplet extends DynamoSer
-
AICS3, How to curve a block of text
I'm still using AICS3, but I hope someone can help me anyway. I'm creating a file that will eventually go to a sign shop to have vinyl letters cut. These letters are being adhered to the surface of a cone (I work in a museum: I'm always doing stuff l
-
Using struts - jsp design question
Using struts. Have a JSP cust.jsp In it half of it is very specific to that page only. rest half is shown in this cust.jsp and another report.jsp too. want to implement this so that code can be re-used in the other one too. The way I have designed is
-
OWSM Integration with Service Registry- Failing
Hi All, I am trying to import a service published on service registry in OWSM and then trying to test the gateway from OWSM->Tool->TestPage. But I am getting the following error after running the test which is as follows:- ORABPEL-08021 Cannot find p