Report is Blank after Click on Save button
Hi All,
I am having a Real Time Infocube, which is been used by Monthly and Yearly report separately using different Aggregation Levels.
During Monthly report testing, I made changes in Yearly Report (common for monthly as well) and clicked on SAVE button.
As a result, a new request generated into the Cube, whereas my old request (yellow one) was still there and was containing only 700 records.
Step1:
Now, after that when I activated aggregation level. The output of the report was blank.
Same thing happened with monthly report also.
Step2:
So, I deleted that new request from Cube after changing its behaviour from Planned mode --> Load mode.
Now, when I tried to get it back. It was asking me to green the existing request (old request).
Step3:
when the cube was containing only old yellow request (before changing the behaviour) monthly report was showing me correct data. But, Yearly report was blank.
So, I manually green the request and changed the behaviour to Planned mode.
Whereas, Now (after changing behavior to Planned mode) both reports are blank.
Please help!!
Best Regards,
Jatin
Hi,
first you the correct settings in transaction RSDIPROP for your InfoCube:
On tab 'Roll Up' you should set the flag Set Quality Status to OK Automatically.
Second delete the cache for the planbuffer query; the name of the plan buffer queries are as follows
- if your aggregation level is defined on InfoCube CUBE the name is CUBE/!!1CUBE
- if your aggregation level is defined on MultiProvider IPROV the name is IPROV/!!1IPROV
- if you are using a query on a MultiProvider containing aggregatiion levels delete also the cache of the query.
Now check the values of your query again.
Note 1136163 contains the recommended cache settings in RSRT.
Regards,
Gregor
Similar Messages
-
Adobe reader opens "save as" box when clicking on save button rather than saving in the same file
Hi everybody,
I have a fillable PDF form designed in Livecycle designer and it is reader extended. When I fill that form on MAC it let me fill and save the form as many times as I like. Everytime I make any change I just click the save button it saves changes in the same form. BUT is is behaving differently on Windows. After filling the form out when I click on save button it opens up "Save as " dialogue box to save a new copy with those changes. I have Adobe reader XI and Adobe Acrobat XI installed on windows. I know I can do that with Acrobat but I want that in reader for users who dont have acrobat.
Please help me.....
ThanksWhat are you filling out the form with on the MAC?
-
After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
After clicking the download button, I received the message, 'The item you've requested is not currently available in the U.S. store.
This is not uncommon. Not all apps are available in all stores, just as not all OSx apps are available in IOS. The reasons are many, commercial, legal, copyright, whatever but it won't change your position. If it says not available, then that is the situation.
-
My PC will not download iTunes 10.7. Nothing happens after clicking on Save File. Do I have to uninstall 10.6.1.7 first?
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Erec - When an External window opens after click of a button
We are using an Standard Webdynpro Erec Appln.
When an External window opens after click of a button the smart form embedded in that windows view is not appearing instead and small X mark (in Red) is appearing with fully plain background
It is happening only for my system, others are able to view it properly...
I have cleared the cache, restarted the system and also re-installed the Adobe Reader too..
But still the problem persists.. Let me know what can be done in this case...
Thanks & regards,
RashmiThe service that you are trying to use requires integration of adobe with in browser(IE). Check the option [Display PDF in browser |http://lh4.ggpht.com/_E1SpYl0ZbfE/SlI0rfQAxeI/AAAAAAAAAh4/fC9alkf1M78/Adobe_Setting.gif]in Adobe Reader preferences.
If it still doesn't show the PDF, try to reset the browser setting to Medium and re-open.
Regards,
Trikanth Basetty -
I use a TV listings program called DigiGuide. This has a script that opens a new Google Calendar event page in my browser for a specified TV program with all fields already completed. I then just have to click the SAVE button on the Google Calendar site to save the event - but since updating to 9.01 from 8.xx this button and others (Discard, Search) has no effect, although the cursor changes when over the button as if it recognised a link. Opening the same page in Chrome works fine. I have also noticed that Calendar's other buttons (e.g. next/previous period) can stop working on the main Calendar page, which I have as a pinned tab - in this event navigating away from Calendar and back again regains that functionality. The issue persists in Firefox 10b2.
Further investigation reveals this only happens when the event is created from within WP native calendar app and disappears when I make an edit to the event in any other calendar client including Google web. So a more appropriate description of the problem would be:
"Native calendar app keeps subtracting 1h off a Google calendar event on EVERY edit"
Create an event at 2013/07/17 15:00 in WP native calendar app. Result: Event shows as 2013/07/17 15:00 in the calendar app for a few seconds, then updates itself to 2013/07/17 14:00.
Edit the event title and save in WP native calendar app. Event time moves by -1h again to 2013/07/17 13:00.
Edit the event title in Google web calendar.
Subsequent edits in WP native calendar do not mess up the time any longer. If I fix the time to what I originally intended (2013/07/17 15:00) in WP native calendar app, it stays there and shows correctly in all previously mentioned calendar viewers.
I just learned that Lumia 925 was released with GDR2 update pre-installed. This update is only now being made generally available. If the issue is secific to the CalDAV implementation in GDR2 rather than specific to my phone only, this would make a lot of angry people. I hope I'm wrong on this though as it's an extremely frustrating problem. -
I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.
I am having a similar problem. I am using Chrome and tried on Mac and on PC but the same. Its not completing my order and on PC saying:
We were unable to process your payment please contact our customer support.......... etc
But strangely its giving a confirmation button again. It gave me this error upon reconfirmation:
PMT_000011 : adbehme, en_IE, There is money to authorize, But no Aurthorize delegated were applicable, 12834289525 -
My firefox crashes directly after clicking the firefox-button
'''1'''. firefox suspended directly after invoke the program
'''2.''' I changed the "compatibility-mode" to "Windows 98/Windows Me"
'''3'''. firefox crashes directly after clicking the firefox-button
-> it opens "Morzilla Crash-Detector"-> '''Is my Firefox problem a result of MALWARE ??'''
* Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
Check and tell if its working. -
CS02, On click of SAVE button, need to capture some event related with this
Hi,
My requirement is like,
I change the material BOM using CS02 tcode.
When, I complete the changes, and click on SAVE button, I dont find any event triggering in the system.
Can any help in capturing some event related to this?
The reason why I need this is ..during the workflow runtime, the user is presented with the workitem to change the Material BOM with CS02 tcode. And, if sometimes, by mistake, the user is unable to complete the changes of the workitem, and comes back of CS02 without change completion, then the workitem is disapperaing from the inbox, with out completing the intended task of the workitem. So I want to make the workitem appear repeatedly in the user's inbox, till the desired action is done.
ThanksSai,
You need to use a Loop..While statement by validating the decision step.
Use a varaiable to store 'Y' or 'N'.
intially, have the value as 'N' and if the required outcome is taken. Eg: Accept,Reject.. then change the value to 'Y', which will go to the next step of workflow.
if 'N', it will again create a new workitem with the same content to the same agent.
Hope this helps.
bye,
Sudhir. -
Session should logoff on click of save button in webgui window
Hi All
I am directly changing section 80 details using WEBGUI ervices( PA30 tcode with infotype 585 in change mode) WITH BELOW URL
'http://XXXXXXXXXXXXXXX/sap/bc/gui/sap/its/webgui?~transaction=*pa30%20RP50G-PERNR=' lv_aempid
';RP50G-choic=0006;RP50G-SUBTY=4;RP50G-begda=01.01.1800;RP50G-endda=31.12.9999;DYNP_OKCODE=CHG'
So user able to change their details using above URL, but when user clicks on save button, it is showing PA30 main screen..I want o know how to avoid this screen...
My requirement is when user clicks on Save button, it should save and logoff from session.*
Regards
SrinivasTry to use CALL FUNCTION 'ITS_END_SESSION' in the user-exit.
Of couse you must check that it is webgui session (not sapgui).
Hope this helps -
Disable Checkbox, once i select checkbox & click on save button
Hi All,
Once i select checkbox & click on save button
then Checkbox will Disable, in moodule pool programming.
ThanksHi,
Add the below code in PBO.
loop at screen.
if screen-name = 'CH1'
if g_save = 'X'.
screen-input = 0.
else.
screen-input = 1.
endif.
modify screen.
endif.
endloop.
Add the below code In PAI
case okcode.
when 'SAVE'.
g_save = 'X'.
*code for saving data
endcase.
Hope this helps.
Thanks,
Balaji -
Why does itunes get locked with last update after clicking on search button ?
Why does itunes get locked with last update after clicking on search button ?
Why does itunes get locked with last update after clicking on search button ?
-
Trigger a process chain when user clicks on save button in web interface
Hi All,
This is a issue I'm facing with the BW BPS web interface.
BPS web interface generates a BSP application so thought posting this question in BSP forum might get some responses.
The issue is I have to trigger a process chain when the user clicks on the save button on the web interface.
I have no clue how BSP works. So if anybody has any ideas or suggestions I would greatly appreciate it.
Thanks,
HariniHi Dhanya,
This is the code i have in the ABAP program in the process chain. I just included the API_SEMBPS_POST part, but still it doesn't work. Please give me your email address so that i can send some screenshots.
REPORT ZHTEST.
DATA: l_subrc TYPE sy-subrc.
DATA: ls_return TYPE bapiret2.
CALL FUNCTION 'API_SEMBPS_POST'
IMPORTING
E_SUBRC = l_subrc
ES_RETURN = ls_return.
CALL FUNCTION 'RSAPO_CLOSE_TRANS_REQUEST'
EXPORTING
I_INFOCUBE = 'ZMAP_TAB'
EXCEPTIONS
ILLEGAL_INPUT = 1
REQUEST_NOT_CLOSED = 2
INHERITED_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to stored data after clicking checkbox save in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.hi!,
use MODIFY to update data into the data base table.
regards
anjali
Maybe you are looking for
-
What does this error indicate, i.e., what is it saying? I continue to get this on my Disk Utility... I'll run repair permissions, and it will go away for awhile... but then, I'll notice it again, say, after a software update and repair of permissions
-
Newbie to attachment with JAX-RPC
Hi, I am new to Web Services. I am developing a web services using oracle technology. I use JDeveloper 10g to create my web services using stateless Java class. Everything are so simple with clicking here and there to generate my WSDL file, web servi
-
Can't load more than 2gig on 40 gig iPod. Inexplicably skips too.
I have a 40 gig click wheel iPod that I purchased new 1 1/2 years ago. I've been having 2 problems lately. One, I can't put more than 2 gigs of music on it. When in iTunes, at about the 2.1 gig point, when I try to load anymore music the iPod will lo
-
Masterdata functionality in transaction data
Hello guys, does SAP provides kind of guidline/matrix for the influence of wbs masterdata ? (influence of wbs' business area in PR, PO, down payment request and so on.. ) . can anybody share a link/sap note ? thanks guys, Laimonas
-
Can someone please help me add a quantities field to my apparel order form?
Would someone be able to help me figure out how to add quantities to my apparel order form? I created a rating scale for colors and sizes, but I can't find the best way to add a quantity field. There are many different colors and sizes, and I would