Report is not getting published on brodcaster.

hello friends ,
I am not publish the report on Bex brod caster ? do i need to do any setting ?
i am trying the publish thr analyzer or query designer .
Please suggest .

Hi Akshay,
information broadcasting(IB) screen will only open when you have successfully setup your environment for IB. there are quite no of sequential steps to be followed to setup the env.
below is the link. I have set it up once. Go thru the link and setup IB, then you ll be able to broadcast the queries.
[http://help.sap.com/saphelp_nw04/helpdata/en/ef/4c0b40c6c01961e10000000a155106/frameset.htm]
hope this helps.
Regards,
Purvang

Similar Messages

  • Report Instance not getting started in Oracle Fusion Middleware 11g Report

    Hi
    Report Instance not getting started in Oracle Fusion Middleware 11g Report Instance Error
    Rep-50125 Java.lang.nullpointerexception
    I just installed Oracle Forms,Reports 11g 11.1.1.3.0 in my machine
    Even I started opmnctl(Oracle Process Management Control). Its too running fine.
    Please Guide me the settings need to do to start the report instance.
    Regards
    Murali N S

    Hello,
    Copy rwlpr.exe from Oracle_Home\bin to Oracle_Instance\config\reports\bin
    Regards

  • Early Watch Reports are not getting generated.

    Hi Experts,
    I'm new to Solution Manager.
    We were getting EWA report regularly till last month in solution manager.
    But for the past one month the reports are not getting generated and I'm getting the following error message.
    Kindly help
    The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
    Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
    Typical sources of errors are:
    The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
    Session number: 1000000000704
    Thanks,
    Shanahas

    Hi,
    The maintanance package is getting executed everyday. However, it is throwing some error.
    I have checked the RFC connection and they are working fine.
    Here with I'm attaching part of the log i got for the maintance package error.
    Pls help
    Maintenance Package completed
    > Maximum number of retries reached ( 0003 )
    Updating license data completed from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Error updating license data from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Retrieval of license data failed from destination SM_SOMCLNT100_BACK
    > ( AGS_MK_GET_MAINT_KEYS )
    > Function module for retrieval of license data not available on Solution Manager
    Updating license data started from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Error refreshing service definitions from destination SM_SOMCLNT100_BACK
    > Password logon no longer possible - too many failed attempts
    > error reading function module interface BDL_DO_SESSION_REFRESH_NEW from SM_SOMCLNT100_BACK
    > Re-entry after error
    Refresh of service definitions started from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Refresh sessions from destination SM_SOMCLNT100_BACK finished [Maintenance Package]
    > Sessions cannot be refreshed from destination SM_SOMCLNT100_BACK ( SOM , 0020312095 )
    > Password logon no longer possible - too many failed attempts
    > error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOMCLNT100_BACK
    Refresh sessions from destination SM_SOMCLNT100_BACK started [Maintenance Package]
    Refresh sessions from destination SDCC_OSS finished [Maintenance Package]
    > Sessions are up to date
    Refresh sessions from destination SDCC_OSS started [Maintenance Package]
    > Not due, due every 7 day(s), last successful run 10.07.2011 21:20:24
    Delete old session and log data :
    Maintenance Package started
    Thanks,
    Shanahas

  • Why does my content not get published on my website?

    I published a website with Webmatrix to Azure using the "Download publish profile".  Everything went well and I didn't encounter any errors.  When I went to the azure URL that I created or click on that link, the URL displays the following message:
    This web site has been successfully created
    There's nothing here yet, but Windows Azure makes it simple to publish content with GIT, TFS, FTP or your favorite development tool such as Visual Studio or Webmatrix
    When I click on the Azure Dashboard I notice that under "usage overview" it states under the "File system storage" that I'm using 18.09 MB of the 1024MB limit.  This to me is an indication that the files/content were successfully transferred from Webmatrix
    to Azure, but it did not get published to the URL.
    When I click on the little "?" on Azure, it mentions something about uploading the content with "web deploy", yet there is no icon anywhere on Azure that I can find to upload anything.
    Is there anything that I must do to get my content to show up at the URL or did something went wrong when I downloaded or installed Azure?  Thanks
    PS:  I'm just using the 90 day trail period and have Vista

    Hi Thanks for the reply
    When I go to the link that you supplied, I get the exact same message: Website has been created but there is nothing here.  I have now uploaded 10 sites from Webmatrix to Azure.  All 10 websites uploaded fine and I received a message that it was
    successfully published.  In Azure the status of all the websites are "running", but if you click on the URL, it shows the message above. 
    Also, when I click on the FTP Hostname link for any particular site, it takes me to a login screen.  After logging in I get an Alert "530 user cannot log in"
    Also, is there a way to access the Wordpress root files such as wp-content from anywhere?  Thanks

  • Report is not getting refreshed after changing prompts once again?

    HI,
    I am running some webi and deski reports using webi sdk also i'm handling the prompts of
    report.
    Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
    then i fill all the prompt for the report it shows the data for selected prompt values.
    But if i once again changed prompt values it shows data of previously selected prompt values not for
    the currently changed prompt values. means reports not getting refreshed.
    sometimes its work correctly.
    What will be problem?
    How can i resolve this issues?
    Please help me
    Thanks in advance
    Harshad

    The workflow is:
    1. Refresh
    2. Set Prompts
    3. Get View.
    then repeat.
    Are you refreshing before setting prompts?
    Sincerely,
    Ted Ueda

  • In PDF conversion, full width of the report is not getting converted.

    Hi all,
            Iam working on a report which will be scheduled in background. I need to convert the report output into pdf and then to send it through mail.
    I can able to send the document, but the problem is I am not getting the all coloumns in the pdf few coloumns are getting truncated.
    Can anybody help in this regard.
    Thank you.
    Regards.
    Ranganadh.

    Hi Ranga,
    Data:
    w_binsize TYPE i,
    w_spono  LIKE  tsp01-rqident,
    w_spono = sy-spono,
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          src_spoolid                    = w_spono
       IMPORTING
         pdf_bytecount                  = w_binsize
    Regards,
    Sravanthi

  • XAP Applications are not getting published in Windows Phone 8.1 Emulator

    I've SCCM + Intune integrated environment (trail version of Intune). Enrolled Windows phone 8.1 (emulator) device into the infrastructure. 
    I'm able to login to company portal and can see the devices associated with my user name in the company portal however I'm not able to publish any of the apps. It says your query didn't return any results :(
    I tried all the following types of apps (Windows apps in the windows store, Windows Phone app package and Windows phone app package in the windows phone store) but nothing getting published :( any clue ?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Yes, at last issue got resolved :)
    http://anoopcnair.com/2014/11/11/xap-applications-published-windows-phone-8-1-intune-integrated-sccm-2012-r2/
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Vendors not getting published from Sourcing 7.0 to ECC

    Dear Experts,
    In our SAP Sourcing System version 7.0 we are not being able to publish suppliers from Souring to ECC but opposite is working fine i.e Vendors are coming from ECC to sourcing perfectly fine.
    When ever we are creating a supplier in Sourcing and trying to publish it to ECC the status always remains as "Create Supplier : Waiting For Response" . Even iDocs are not getting created and also in PI we are not getting any data in the inbound area.
    Any help will be appreciated.
    Regards,
    Rakesh Daiya

    Hi Rakesh
    Please check if the Interface and communication channel have been configured properly from PI side -
    Communication Component (Sender): SAP Sourcing system
    Interface : MI_OB_Supplier
    Namespace :  http://sap.com/xi/Esourcing/SRMJS/OP
    Communication Channel : CT_Generic_Receiving_IDOC_Channel_For_ERP_Inbound_IDOC
    Thanks
    Sudipta

  • Report is not getting displayed in ESS (ITS version)

    Hi ,
    I often create reports in ABAP HR and display them in ESS (ITS) .
    But this time , report is not displaying the contents of internal table .I have first time used BAPIs to pass the values to internal table .
    Is it the reason ??
    Please help me in ths regard how can I make my report displayed in ESS.

    Please make your transaction code as easy web transaction form SE93 and then try.

  • Report is not getting filtered

    i created a date between prompt , and filters and selected as filter is prompted but while i selecting the date range in dashboard its report is not geting filtered.

    Hi Saket,
    check whether the particular column is prompted in the report....
    Refer : http://obieeone.com/2010/03/04/lessons-in-filters-and-the-is-prompted-operator/
    Thanks
    Aravind

  • BI Publisher report page not getting displayed on ADF

    Scenario: OBIEE 11g integration to Webcenter Portal
    The Dashboard pages which are developed in Answers are getting displayed correctly to ADF Page.
    ISSUE: But a dashboard page with BI Publisher report page displays error 404 on integration to ADF Page via BI Presentation services connection.
    This BI Publisher report shows up without any errors on the OBIEE Dashboard Page.
    thanks
    Reshmi

    Hi,
    kindly refer the below one
    http://www.rittmanmead.com/2011/05/oracle-bi-ee-11-1-1-5-new-jdeveloper-extensions/
    http://jdevelopertips.blogspot.com/2009/08/integrating-bi-publisher-into-jdevelo.html
    Thanks
    Deva

  • Report is not getting displayed in Web

    Hi All,
    I have got two big reports whic have goot lots of data. The report is generated in PDF format, but when it is trying to display, it gives message 'Page cannot be displayed' & the report is lost.
    Please advise.
    Thanks
    Awadh

    Hi,
    Please find the message below.
    ''Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Report Job was cancelled upon user request.''
    This all i am getting as error, there is on error number displayed.
    Same report is running fine on client server, also it is running fine for less data on web.
    Thanks,
    Awadh

  • Report is not getting data from Remote cube thru Multi Provider

    Hi SAPians
    I ve strucked up with a Problem in The Reconciliation Report in BW3.5
    The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
    Both cubes have same Data Source and all the Objects were in Active version and found good.
    When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
    I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
    What might be the problem
    Please help me in this regard
    Thanks in advance
    Regards
    Arjun

    Hi
    In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
    If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
    Check with basis to solve the connectivity issue.
    Ensure Remote cube is consistent
    Bye

  • Bex reports are not getting displayed in portal

    Hi,
    We have created the BW iviews in portal (SAP EP 7.0 SP10). iViews work fine in Q environment but when I import all the iViews, roles and worksets in production server and assign the role to particular user, i am not able to see the bw reports. I am getting the run time exception "Could not find portal application com.sap.ip.bi.bics.".
    Any help will be appreciated.
    thanks in advance,
    Manish
    <b>Detailed exception is given below:</b> Exception ID:10:38_09/02/07_0020_103787350
    [EXCEPTION]
    com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : com.sap.ip.bi.web.portal.integration.launcher
         at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java(Inlined Compiled Code))
         at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java(Inlined Compiled Code))
         at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java(Compiled Code))
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java(Compiled Code))
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java(Compiled Code))
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code))
         at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code))
         at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent of Portal Component com.sap.ip.bi.web.portal.integration.launcher because: Could not instantiate implementation class
         at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java(Compiled Code))
         at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java(Compiled Code))
         ... 29 more
    Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.ip.bi.bics
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java(Compiled Code))
         at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
         at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java(Inlined Compiled Code))
         ... 33 more

    Hi Manish,
    Have you imported the system object and other dependant objects.
    In Production iviews point to which system
    Regards
    Arun

  • Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

    Hi,
         Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
    of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
    when I try open Lync monitoring service from web UI, 
    http://localhost/ReportServer_LyncMonitoring/
    Web UI is opening but Reports home page is not Accessible , Getting error Like
    "An error has occurred during report processing. (rsProcessingAborted)
    Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect"
    Please help me to trouble shoot this problem.
    Thanks,
    Rajarajan.D

    Hi Rajarajan.D
    You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for