Report - Landscape print

Hi friend,
I am using Oracle reports 6.0.
I want to print a report(character mode) in Landscape using A4 size paper.
Advance Thanks.
null

Hi Jonathan,
I installed the new patch as you suggested, but still I'm not getting the reults I want when I print the rtf file.
Can I just clarify again what's happening.
Main report is landscape in the crystal designer.
Into one of the group sections I insert a subreport. Within the group section where the sub report is, I change the paging to portrait. I also choose the new page before. When I run this in Crystal it views fine and prints fine.
After I export the report to Word in Crystal reports and save it to disk. The Word file looks ok. I.e first page landscape second page portrait. When I print it, it prints both as landscape.
Why are some of the page/print setting lost when it's exported.
If you want me to post on the other forum can you please outline the link
Thanks

Similar Messages

  • Printer Setup for HTML reports (Landscape)

    I'm trying to print an HTML report in Landscape, the Report Orientation VI only works with Standard Reports, and I can't find anything that will let me modify the "Printer Setup"
    Anyone done this?

    Jeff,
    To print an HTML report it first has to be rendered. To render HTML, you need a browser. For example, you can render HTML in either Internet Explorer or Firefox or Opera, and all three might render the same data slightly differently. To simplify the situation let's say that you're using IE. Once IE renders the HTML, you then have to get it to send the rendered output to the printer. So you can see why it isn't time or cost-effective for NI to try and necessarily support these functions. For the end user however, I'd guess that quite a few people have had this problem.
    I have had to do a lot of digging around to get HTML reports to print right. My solution has been to use an ActiveX container with an IWebBrowser2 object (Internet Explorer). This will let you load and print HTML reports programatically however (glancing back over some old code) I don't see immediately how you can print a report in Landscape. With an ActiveX container however you can call the IE print preview function which will let you (the user) modify the report printing to Landscape. It's not a programmatic solution since you have to interact with the GUI but it works. Also, once you set the setting to Landscape, everything printed afterwards using your ActiveX container will also print in Landscape.
    Something else which may not apply to you (but maybe--I'll at least mention it) is printing a landscape single image... that's usually why I needed to print landscape... to print out a full page screenshot of a graph or something. I do this in portrait mode by just attaching the control image but rotating it first and adding the HTML code to make it 100% of the vertical page.
    Last but not least, if you are 100% set on using a programmatic implementation to print a landscaped report (no user interaction), the best thing to do would be to build on an ActiveX implementation so that your report is being loaded and printed from an embedded IWebBrowser2 object. With the IWebBrowser2 object there is an option for using a pre-defined print template. This option is NOT for the faint of heart and requires you basically to re-program the whole IE print-preview functionality. However, it's not impossible either, it just takes the time of learning basically how the IE print preview interface works and then adapting it to your application (in this case, landscaped printouts). This is also the ONLY way to change HTML report headers and footers. The print preview interface in IE is written entirely in javascript--you can get details on msdn (search for "print preview templates"). However, there isn't really enough info there to do things with any ease. So....
    If you get to the point where you get an ActiveX container working and want to fool with the IE print preview javascript templates, let me know. I have extracted the entire template and associated images from the windows DLL it is stored in so I could adapt it and change the headers and footers for my reports and things of that nature.
    Now that I mention it, I believe that is the only way also to actually set landscape or portrait--by programmatically changing the printing margins (so it prints 11x8.5 instead of vice versa).
    Anyway, hope that helps...

  • Need help about how to print the report landscape

    Hi,
    I am using Oracle Developer 6.0 Report Builder to generate reports and I am new to it. My boss asked me to generate the report in landscape style. In the Report Builder for Windows 95/NT, I went to FILE->PAGE SETUP, clicked Landscape and OK, but it didn't work. Also, I saved report as PDF file, in Acrobat Reader 4.0, I did FILE->PAGE SETUP->Properties and chose Landscape. But after the report was printed out, it was still in Portrait style. By the way, the Landscape Properties of printer working for MS Word.
    I'd really appreciate it if someone would give me some suggestions.
    Best regards.
    Judy

    Hi,
    Thanks for your reply, but I have no idea with patch 7, I am wondering if you can tell me more about it.
    Best regards.
    Judy
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chris Sung ([email protected]):
    It is Oracle Bugs... Try to apply patch 7 to see whether it can help you!<HR></BLOCKQUOTE>
    null

  • HTML DB  call Oracle Report and Print

    I have a PRING button on the HTML DB report. When the user click on this PRINT button it launches the oracle report location Portal Server in UNIX box. The report display in Lanscape format as I set it up. However, when I go to File/Print and click print. It print inf Portral. I tried depressly to make it print on page in lanscape format, but I was not success. Pleas help.

    This isn't really an APEX question and it's not that clear what you're wanting to acheive.
    However, have you tried choosing the landscape print format on your printer preferences via the File -> Print dialog?

  • Report Spool Printing Font Change

    Hello All,
    While printing the spool request created by ABAP report(ALV)  print document is not much clear due to small font , is there any technique to change the font size while printing the spool request or any technique to print horizontal line between each row into spool like vertical line between each column so that it can be understandable.
    Thanks in advance.
    Regards
    Chudamani Gavel

    In my case, I found that SAP was calculating the max line size for the printout, based on the maximum possible number of output columns, as determined from the field catalog.  That resulted in SAP setting 512 and reducing the font on landscape output to the point that a microscope was needed!  I fixed by limiting the output of some columns (splitting texts into multiple rows of ALV, along with the essential key fields), and setting my max line size to 200.  The resulting printout is small, but still readable.
    layout - max_linesize = 200.
    check also:
    gt_print-no_change_print_params = 'X'  (of type slis_print_alv).  "don't allow SAP to change what is set in job or in background submission

  • Change Maintenance Work Order Detail Report in Print WO page

    Hello,
    I would like to ask you for your help. We would like to have different report in Print WO function than Maintenance Work Order Detail Report. I mean SSM responsibility > Search for WOs > click Print WO icon. We applied patch #9871500 (I found it there: Templates associated to datadefinitions other than 'EAMWRREP' are not shown in the Work Order Detail report in EAM [ID 1209703.1]). I did personalizations steps - I defined new data definition (for example TEST) and report with data definition TEST is shown in the option on Print WO page now... But how should I it define to have correct result? What should be defined in Executable, Concurrent Program, Data Definition and Data Template? I have RDF and RTF files for this report. We are using different SQL than it is used in the original report. How could be used our SQL defined in RDF?
    Thanks, Regards,
    Jitka

    Hi,
      1) You can choose to select and Print shop paper when you need.No enhancement is required.
    2) There is not an option in standard to say Print/Not print Long text . You will have to replace the standard form with a custom form and build the logic to print /Not Print long text based on your rules.
    Regards
    Narasimhan

  • On Demand sub report not printing in IE and Other Browsers

    Hi All,
    We have developed Crystal report for our web application with version 13.0 and Visual Studio 2010.
    When we run our web app in IIS report display fine in All web browser and when we print report in ActiveX mode in IE 9+ for main report it prints fine but if we print on demand sub report it not printing even a single page out of 2 or more than 2 page.
    If on demand sub report has only one page then it will print in IE 9+  browser.
    Even If we click on Export button on demand sub report easily export to pdf or any formate the issue while we print it.
    It going to hanged while we print on demand sub report with more than one page.
    Please help in this issue.
    Also  please let me know if you want more detail.

    Not sure why you created two Discussions on the same issue? (CR on demand sub report goes hang in IE)
    Locking this Discussion.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Report not printing from server

    hi i am using vs 2008 and crystal report 115.7.620
    I am using the report to print cheque without preview. I am suing DNN version 5.4.2.
    i am using the printtoprinter function.
    iwhen i click on the print button i get this error.
    I am accessing from a server where i have deployed the dnn website. Crystal report is installed onteh serve too.
    am i missing something.?
    Please let me know
    Thanks in advance

    Very good. Version 10.5 will work for us.
    I'd like you to apply SP 1 for CR 10.5 from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
    Recompile teh app and use the SP 1 runtime:
    https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
    Ensure the printer driver is installed on teh server. If this is a system printer, see [this|http://support.microsoft.com/kb/184291/en-us] MS Kbase.
    Ludek

  • How can i modify my report to print in duplex mode ?

    Hello, I have a report to print orders (i use vb6 and CR XI-R2 at runtime with CrystalActiveXReportViewer object) but now i must print the payment conditions on the back of each order. What is the way to modify my report to do that.
    (Is there somewhere examples of duplex printing report?).
    Thanks in advance.

    Hi Ludek,
    I have imported the reg key but i have the same problem: you must install SP2 or SP4 before.
    Here is my reg key :
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94FB0978-D094-40C7-91D7-834D39220D4A}]
    "AuthorizedCDFPrefix"=""
    "Comments"=""
    "Contact"=""
    "DisplayVersion"="11.5.8.82627"
    "HelpLink"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,\
      70,00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,\
      00,6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,\
      00,00
    "HelpTelephone"=""
    "InstallDate"="20080416"
    "InstallLocation"=""
    "InstallSource"="C:
    CRXIR2SP2Full
    win32
    "ModifyPath"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,78,\
      00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,00,\
      38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,39,\
      00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,00,\
      30,00,44,00,34,00,41,00,7d,00,00,00
    "Publisher"="Business Objects"
    "Readme"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,70,\
      00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,00,\
      6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,00,\
      00
    "Size"=""
    "EstimatedSize"=dword:001bcc81
    "UninstallString"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,\
      78,00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,\
      00,38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,\
      39,00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,\
      00,30,00,44,00,34,00,41,00,7d,00,00,00
    "URLInfoAbout"=""
    "URLUpdateInfo"=""
    "VersionMajor"=dword:0000000b
    "VersionMinor"=dword:00000005
    "WindowsInstaller"=dword:00000001
    "Version"=dword:0b050008
    "Language"=dword:00000000
    "DisplayName"="Crystal Reports XI Release 2"
    Hope this helps you.
    Just a precision : the message 'can't load data' not occures on all PC with runtime, At work i have installed runtime on 3 PC's (XP) and it works, problem occures when i 'm connecting to my customer's server (windows 2003 server SP2) via tse.

  • Smart forms- when i print a report it print main window data on same page

    hi,
    when i print a report it print main window data on same page .
    i.e. if data is more then one page then it shows data page wise on computer screen but when i print it print all data on same only one page by over wrriting .
    pl. help why it is happening
    i create page in page i set next page and in second page give first page.
    mukesh

    mukesh,
    what happened to this: smart form
    close that please.
    by the way,did you tried with what i suggested?
    lets say mainwindow in 1st page.
    copy the first page to second page.
    now.
    for 1st page: next page is : page2
    for page2: next page is also : page2

  • Report Rendering (Print & PDF) trashes report that looks fine on screen

    Since installing SQL Server 2012 SP2 CU3 (11.0.5556) a number of reports look fine on screen but when printed or exported to PDF the format is totally altered so that either many blank lines are inserted between lines, or lines are squashed together. It
    doesn't affect all reports. Reports (both affected and not affected) use Tablix with both Row Groups and Column Groups. There is no obvious consistency between those reports that are affected.
    All of our SQL Server instances are hosted on VM-Ware virtual servers.
    I've raised the issue via Microsoft Connect: https://connect.microsoft.com/SQLServer/feedback/details/1063641/report-rendering-print-pdf-trashes-report-that-looks-fine-on-screen
    Any thoughts or workarounds? Is this a bug?
    Thanks!

    Hi nsam,
    We installed the sqlserver 2012 sp2 cu3 in our lab, but unfortunately the issue cannot be duplicated, so I provided the following options for your reference.
    1),Please help to provide a way with detail steps to duplicate the issue.
    2),If you don't know how to duplicate the issue, please try to remove the sqlserver 2012 sp2 cu3 update by the following steps to see if the issue can be fixed.
    In Control Panel, open the Add or Remove Programs item.
    2. Click Change or Remove Programs .
    3. To see all the updates for the SQL Server 2012 installation, click to select the Show Updates check box.
    4.Uninstall the cumulative hotfix package.
    3,)Please visit this link to see the various support options that are available to better meet your needs: 
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone

  • Crystal Report XI Print report on different paper size (A4/Letter)

    Hi,
    I have designed report in Crystal XI using paper sieze Letter. Multipler sites are using this application. User in USA are using Letter size paper and User in Euorpe are using A4 size paper. All reports work fine for USA users.
    When Eurpoe users print the report on A4 size paper which set in Letter size, the report is truncated from Header or footer. They are printing report from Application and application is set on Citix server.
    If Anybody have any idea how to setup Crystal report so it can print on any paper size?
    Thanks
    Bhagvat

    Hi Don,
    Please find the below description.
    Background: Crystal Report XI is utilized to develop and view reports with data source from Oracle based LIMS application (Vendor: LabWare). The reports are printed using network printer on US Letter paper for users located in North America and on A4 paper for users located in Europe. The report format is US Letter and designed to print on both paper formats i.e. Letter and A4.
    Issue: When reports are printed by users in Europe using A4 format paper the printer defaults to US Letter paper (in printer preferences) resulting to data cut off from top and bottom on the printout.
    1)      When report layout is select to A4 during developing reports using CR, the printing preferences changes to A4 when printed and vice versa for Letter format. How can we avoid CR to enforce from changing printing preferences?
    2)     According to Citrix engineers in the company, the printer drivers installed on Citrix servers have nothing to do with printing preferences and CR defaults to paper size based on report design. What do we tell them about doing different to resolve this issue?
    3)    Even though a printer preference of default printer on local desktop is changed to A4, the report gets printed to Letter format result in data cutoff.  We have tried this option with several HP printers from few different company locations.
    Thanks
    Bhagvat

  • Windows 2003 reports server. printing direct to printer

    has anyone got any ideas on the best method/practice for allowing database to submit a print job direct to printer.
    we have a forms environment, 10g, and users can run reports which allow them to select parameters, then print to screen, from which point they can then print manually or save, but we also have a need to submit jobs under the bonnet so to speak, ie. trigger event takes place in the database, send print to printer. note, the print being sent is pdf format.
    many thanks
    jb

    I'm exploring options for the same requirement. There appear to be 2 utilities available - Reports J2EE thin client and Reports Remote Printing Utility (orarrp). ORARRP is more for a forms/reports environment. Do a search in Metalink for ORARRP and you'll find several threads with documentation links. Unfortunately both utilities require client installs. Good luck!

  • Xml report to print AR invoices to multiple companies

    Hi,
    can anyone help me to work on this issue, I need to Develop one XMLP report that prints AR invoices for multiple companies, and multiple invoices for each company.
    It will be thankful, if anyone help me to come out of this issue. I need it urgently
    Thanks

    Hi
    Are you working in EBusiness Suite or another ERP app? IF so then there are already invoice reports built out of the box that you can use quite quickly.
    If not then you need to find out from your users what they want to see on the invoice, then map that to the columns in tables and then write the query to extract the data.
    Tim

  • ABAP list report wont print on Z device type with Z format

    Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
    "Sort criteria         AscdgDescndSubtotalGRAND  TOTAL  :               X                X     PROJ" "
    The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
    I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
    We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

    No comments

Maybe you are looking for