Report Layout Design
Hi All,
I need your help to design a BEx Report , on rows I have Cost Center Groups and on Column I have Fiscal Year Period
And the YTD should be a displayed as a different block and another Block Under Fiscal Period.
Hi Loed,
Yes this is new layout.
For YTD and Previous Year YTD
I have consider an the use input variable (0P_FPER) and the calculate the KF using restriction on period <= 0P_FPER and Fiscal Year = Replacement Variable on 0P_FPER to get the YEAR using offset setting as describe in below SCN solution
YTD Based on Fiscal Year Period without cmod code
but just now I have get one variable 0I_BA106 ( Function Module :RSVAREXIT_0I_BA106) which states
0I_BA106
Cumulated Up To Prior FY Period (SAP Exit for 0P_FPER
hence I was thinking to use this variable to calculate the Prior YTD.
Please suggest.
Regarding the Period : I am considering to have
The 12 Months KF for Planned ( same as for Actual) would be a 12 column for Planned and 12 for Actual, with restriction for on each period.
Regards,
Subhasish
Similar Messages
-
Hi Gurus
I have report layout requirements. Insight or advice is greatly appreciated and rewarded.
I will try to show how the output should be.
Report Header
Material
Material ID
View: By Material
Price vendor abc Xyz
Material 1 1 2 3 4
Material 2 5 6 7 8
View: By Plant
Price vendor abc Xyz
Plant 1 1 2 3 4
Plant 2 5 6 7 8
How to get 2 views in the same query. Hope that explains my problem.
Thanks in advance
Regards
satyReport Header
Material
Material ID
View: By Material
Price vendor abc Xyz
Material 1 2 3 4
Material 2 5 6 7 8
View: By Plant
Price vendor abc Xyz
Plant 1 1 2 3 4
Plant 2 5 6 7 8
This one looks better -
Huge delay in Printing Crystal Report Layout
Good Day Experts,
I am experiencing big delays when printing a document that makes use of a Crystal Report Layout Design.
For example,
The Sales Quote is set to automatically print when added by the user.
When clicking 'Add', SAP freezes up and only about 30 seconds later does the printer finally print the document.
During that time, the user cannot use SAP at all.
The layout does have a lot of fields and a few formulas here and there.
Logically, I am thinking that that is the reason for the delay, as SAP needs to calculate and populate those fields.
Is there any other way that I could speed up this process? Or if you know what might be causing this speed issue?
Your assistance will be appreciated,
Thanks
Regards
DarioHi Dario,
Pl Try the Below Threads and Ref SAP Notes Provided by NagaRajan.
http://scn.sap.com/message/13419121#13419121
http://scn.sap.com/thread/2024941
Regards,
Vamsi -
No one in ApEx forum knows how to modify report layout!!!
Hi dear firends,
I have got Named column report layout (XSL-FO, <!--Generated by Oracle BI Publisher 10.1.3.4.1-->) that was designed by another programmer.
To change it , I downloaded the current file (xml extension file) using the download button on this page,
But I can not modify it by Altova StyleVision , Altova XML or XF Designer! (
How to I modify it rapidly ve easyly by a report layout designer other than BI Publihser?
Regards
siya
APEX 3.2
Edited by: sak on Feb 14, 2012 11:40 AMhello
In shared Components\report queries or \reprot layouts of ApEx 3.2, has written
Named column report layouts are file based. To change, download the current file using the download button on this page, then modify the file as needed. Afterwards, upload the modified file as a new report layout.
How can I modify an XML extension file with other tool than BI publisher? (generated by BI Publisher )
regards
siya
Edited by: sak on Feb 14, 2012 11:12 AM -
Print layout designer for develop report based on query
Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank -
Print Layout Designer \Custom Reports
Hello All,
Is there a way to set a custom report as default in the Print Layout Designer for A/R Invoice in SAP B1 ?
Thank you and Best wishes and Happiness in the New Year 2009.
BenHello All,
Thank you for your answer but I would like to be more exact in my question because I already know how to set a Print Layout as default in a screen of SAP B1 like A/R Invoice by the way that Parlati has mentioned :
1. Open a blank AR Invoice (e.g. service or item type)
2. Click on Menu >> Tools >> Print Layout Designer... or pen icon on toolbar
3. With The Document Type selected - choose template and click on Set as Default
But I usually use the Query Manager Tool of SAP B1 to create new queries and reports and I use the Print Layout Designer to setup the layout of these reports. These reports are printed normally via the print preview Icon of the toolbar. But now I would like to know how can I set one of these Reports as default in A/R Invoice screen of SAP. Because it's a one of my customized Invoices.
Is there a way to do this?
Thank you.
Ben. -
Print layout designer using Crystal report
Hi Dear;
how can i create a print layout in crystal report instead of print layout designer
is any conversion of should i created from scratch?
from where can i download the crystal report templates?
regards;Hi,
There is no conversion tool between these two reports. You have to create them from scratch.
Check these threads to find out more:
Sample Crystal Reports
Re: SAP Business One and Crystal Reports
Thanks,
Gordon -
Transaction Journal Report - Print Layout Design
Hi all
Is it possible to add Journal Entry Project Codes to this Transaction Journal Report (Print Layout Design)?
I tried to add Journal Entry Project Codes to this system PLD but the result still not showing any Project Code.
KedaleneHi Kedalene Chong
ou don't need a list of variables to use them. Simply go to View -> System Information so whenever you hover around a field with the cursor, in the left bottom corner of the screen you will see the details of that screen along with the variable number if it is a variable.
So you will see something like:
[Form=139 Item=29 Pane=0 Variable=91]
-> in this case the variable number is 91 - use it in Print Layout Designer.
So you can just use the variable specified in these details. When creating the print layout, just go back to your form, stand on a field with your mouse and you will see what variable to use.
Also Check with the PLD Variables Note No 867048...
Symptom
Using system variables when designing a print template for the General Ledger report.
Please note that variable numbers might change when upgrading to a higher version.
Cause
FAQ
Solution
Field Name
Variable Number
Posting Date
62
Due Date
63
Document Date
112
Series
140
Document Number
141
Transaction Number
65
Journal Voucher
66
Reference 1
67
Reference 2
68
Reference 3
69
Details
70
Transaction Code
71
Project Code
72
Costing Code
73
Offsetting Account
74
Indicator
137
Total (LC)
75
Debit (LC)
96
Credit (LC)
95
Balance (LC)
76
Total (SC)
77
Debit (SC)
98
Credit (SC)
97
Balance (SC)
78
Total (FC)
79
Debit (FC)
100
Credit (FC)
99
Balance (FC)
80
Creator
138
Internal Reconciliation
131
External Reconciliation
132
System variables from the Business Partner Master Data window available for use in the General Ledger report:
Phone
117
Fax
118
Contact Name
119
Address
120
Sales Employee
133
Remarks
134
Full Address
135
Hope Hepful
Regards
Kennedy -
Add a new table to an existing Print Layout Designer report
Is it possible to add a new table to an existing Print Layout Designer report? For example, in the Production Order there is a Sales Order field (which is displayed on the report), I would like to display some information from UDFs found on the Sales Order, but when I add a Database Field to the report the Sales Order tables does not appear in the list (OWOR).
Hi
It is possible provided there is a relationship which exists between two tables.
You can add a Database field. Goto the Properties and selct Content Tab.
Now in the Table dropdown, hold the Alt Key and click. This displays all the tables in B1. After selecting the Table, you can select the related Column.
Remember there should be a relationship which exists between this column and existing columns.
Because PLD works completely on Joins to my understanding -
Ask Print Layout Designer for customize report
Dear all
I am newbie in SAP, and i must create report with PLD like :
PAYMENT TYPE AMOUNT
By CASH
Cash 1000
Cash 2000
Cash 3000
Cash 4000
Total Cash 10000
By CREDIT
Credit 10000
Credit 15000
Credit 17500
Total Credit 42500
By TRANSFER
Transfer 20000
Transfer 25000
Total Transfer 45000
Total Payment 97500
From database example:
PAYMENT TYPE AMOUNT
Cash 1000
Cash 2000
Credit 10000
Cash 3000
Cash 4000
Credit 15000
Transfer 20000
Credit 17500
Transfer 25000
Right Now,I just can create report like this :
PAYMENT TYPE AMOUNT
Cash 1000
Cash 2000
Cash 3000
Cash 4000
Credit 10000
Credit 15000
Credit 17500
Transfer 20000
Transfer 25000
Total Payment 97500
Please help me.. because i very need it.
Thankyou so much for your help
Regards,
Dony
Edited by: dony donse on Dec 18, 2007 4:29 AM
Edited by: dony donse on Dec 18, 2007 4:38 AMFinnaly...
someone send me PLD manual
And my problem solved
==============
Procedure
After defining the sort, perform the following steps
1. From the menu bar choose Print Layout Designer → Group.
2. Select a group number.
3. Select 1 for a sub-sort or sub-total for the primary sort, select 2 for the secondary sort and so on.
Each group is linked to its relevant row number in the Sort window described above. Thus, every field created in a certain group relates only to its group's corresponding row in the Sort window.
The Repetitive Area Header titles are now hidden as well as any field created in the Repetitive Area Footer. The reason is that these two areas are linked to groups. Each one of the groups has two areas of its own.
4. To define the sub-sort, do the following:
a. In the Repetitive Area Header assign a title for the required sort.
b. Create a new Formula field
c. Choose the Formula Editor button and select the operand SortValue() in the Operation field.
This action will print the Items table divided into separate titles each time the Item number changes.
5. To define sub-totals do the following:
a. In the Repetitive Area Footer create a Formula field.
b. Choose the Formula Editor pushbutton and select the operand ColSum(UniqueID as String) in the Operation field (for the Quantity field from the rows in the Sales Quotation).
The field within the brackets defines the column for which a total will be calculated. You can also calculate totals for the Price and Total columns. -
Hi all,
Could you tell me any tools for design report layout or other way to design? Beside Quick Viewer, SAP Query, Report Painter/Writer, they can't group data and very complex.
Thank you!Use transaction GR11 GR12 GR13 to create and change layout.
-
Modify Financial Report (Profit & Loss) through Print Layout Designer
Hi all,
We try to modify the P&L Financial Report in SAP BO 2005B through the Print Layout Designer tool. We saved a new P&L Report with font size and font type modified and set this new report as default, but we noted that our modifications are only displayed in Report print preview instead printing this Report it seems like our modification are not performed.
Have you got any experience in this matter.
Thanks in advance.
Regards.
AlbertHi Alberto,
We had also faced this problem. we are also using SAP 2005B.
For P&L Report, Hope u did changes in Profit and Loss Statement (System).
But, it is true that the system is not using the baove template for its print. Instead of that the system is using the template called "Profit and Loss statement Comparison".
When u give print preview u can understand this.i.e. the name of the template used will display in the title bar.
Hence, u do the changes in second said template. Hope u understood -
How to copy Advanced Layout Designer report to another company?
Hi all,
With copy express i cant copy any report that is done with the advanced layout designer (i think in copy express only appear SAP BO standard things). Exist any way to pass those reports to other company? In advance layout designer i cant save the report in a directory that i choose (only appear 'save' and not 'save as').
Where SAP save those reports,in what directory of server?
Thank you, regards.Hi Aitor
You can export your layouts from SBO - Administration>Add-ons>ALD>Export Layouts. That will bring up a window where you can select the folder where you want to export to. All layouts will be exported.You can delete the layouts you don't want to import into the new company. From within the new company - Administration>Add-ons>ALD>Import Layouts.
Regards
Daan -
Oracle bi publisher report for apex - Report Layout
Hi There,
Navigation: Home>Application Builder>Application 20>Shared Components>Report Layouts
I created rtf template for a Report Query. It worked fine upto certain point.
However at some point, if I make a minor modification to the layout it is not displaying all the data that it is supposed to.
I have 3 tables in my RTF template 1) Header 2) Details 3) Summary. Details section has a group. This runs fine.
Now if I just combine all the above 3 tables into one by adding row above and row below to the "2) details" table and moving the table 1 and table 3 into those rows, makes the data in the group in table 2 disappear when run on the apex application.
However it works fine when data is loaded on the RTF template and Preview --> PDF is seen.
Is it a known bug? Because some of my coleagues has same issues.
Thanks
Krishna
Edited by: Krishna on Aug 9, 2010 10:08 AMHi, I think you need to provide more information.
user452458 wrote:
Hi There,
Navigation: Home>Application Builder>Application 20>Shared Components>Report Layouts
I created rtf template for a Report Query. It worked fine upto certain point.
However at some point, if I make a minor modification to the layout it is not displaying all the data that it is supposed to. What modification? added extra fields? Are those fields in the corresponding report query? change to the design of the document? did you delete the old template and re-upload after making the changes?
Moreover the preview on the RTF template works fine with the same data.Preview from where?
>
Is it a known bug? Because some of my coleagues has same issues.
Thanks
KrishnaAlso, you should change your display name to something better than user452458 ;)
Trent -
View Crystal Report Layout for my UDO Form
Hi all,
I try to view a report created for my UDO form. I set all settings in Administration -> Setup -> General -> Report and Layout Manager. Now I wonder what should be assigned to eventInfo.LayoutKey. I tried assigned report's DocCode from RDOC, DocEntry of my UDO object or UDO Code but nothing works. Always get an error: Incorrect format of argument or something like that - I didn't get an error in English so I tried to translate it.
How to show a report layout for my UDO form?
Regards
Szymon LipnickiHi and thanks for Your reply.
Help file contains example how to open report layout prepare in Crystla Reports designer for UDO form.
//Add Layout Key Event Handler
SBO_Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SBO_Application_LayoutKeyEvent);
void SBO_Application_LayoutKeyEvent(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
BubbleEvent = true;
if (eventInfo.ReportTemplate == "A001" && eventInfo.ReportCode == "A001001")
eventInfo.LayoutKey = 1; //Set the key of the layout
I am using SAP 8.81.
Regards
Szymon
Maybe you are looking for
-
All warning messages are coming as an error message.
Hi Experts, I am stuck in a problem where all the warning messages in my program are coming as an error message. if I define a message : MESSAGE 'HI' TYPE 'W'. --> it gives an error msg instead of warning. Any clues......pls Thanks Rohit
-
Parental controls suddenly activated - without us ...
Hi there, BT parental controls have suddenly been activated without us asking for it. I noticed it first when trying to access Facebook. I then found out my own website is being blocked (despite no suspicious content!) and as a result also my e-mail.
-
Hello, I am designing my first Dynamic Website in PHP and WAMP and have so far managed to create a working Search Element on my website (search for 20mm on www.reese-test.co.uk ) It shows a linkable pic in "column 1" and Description in "column 2". Wh
-
SunMC - Process is forking and reaping child processes. What's that?
Hey folks, Im really new to the sysadmin world, and I think maybe my company really didn't think things well when they've decided to put me doing this, hehehe. I work with a general queue for which my team receives tickets with different kind of prob
-
every time i try to type in my credit card info to pay for an application, this "Apple Support: Tips for Protecting Your Info" internet page comes up and I cannot purchase anything. I can just download the free ones. This is really annoying! How do I