Report Layout Problems - point over a letter - subscript words

Hi,
is there a possibility to get a point over a letter in the report mode?
i need that as a description for a heat flow Q. but it didn't found a way to get that point over the Q. is there an easy way to get that?
another problem is that i need to subscript letters. in the curve and axis description i get that with "Q^tSp^n_KM" but if i insert an Textfield it won't work in the textfield. can you tell me how i get that in textfields?
Regards Normann

Hi Normann,
maybe the following workaround will help you, too: I have once had a request for ancient chemical symbols to be inserted into a DIAdem report programmatically. The solution was to use a true-type font (.TTF) with the necessary symbols. The symbols were represented through the regular letters, like an "O" for oxygen, "S" for sulphur, ..., which could easily be typed.
With a TTF editor (e.g. FontForge is freeware), you could create the dotted Q (dQdt) or the subscripted quantities as new letters and use these in REPORT.
Best regards,
Sebastian

Similar Messages

  • Matrix-Report - Layout-Problem

    Hi,
    In my report (matrix-rep.) is number of column larger than side-width.
    Report continue printing on the next page, but I want, the report should print this on the same page bellow
    How can I do this?
    Thanks
    Gregor

    Title of this Forum: Forms
    Title of this Thread: Issue with Report Layout
    I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
    Reports has its own forum dedicated to questions related to...reports:
    Reports
    You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
    good luck!
    cheers

  • Report layout problem

    i am facing very strange problem,
    some times in report layout the field ,frame etc movement not exactely accoring to the
    cursor movement(this happend only in some reports others work properly),
    due to this ,layout designing is difficult
    bye
    siddharth

    Hi,
    Please try with latest Report Ver 6.0.8.19.0. you will not face the problem.
    Thanks,
    Puvan.

  • HT5100 Each time I buy diamonds on hayday I am charged for 2 lots of £2.99 when I should only be charged once.  This has happened on a few occasions and when I go to "report a problem" it won't let me.  This is the 2nd time I have asked about this?

    Help I have been charged double each time for diamonds on Hayday and can't report the problem.

    If the 'report a problem' link from your purchase histrory doesn't work then try contacting iTunes support via this page (these I user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Asset report layout problem (S_ALR_87015066, S_ALR_87015065 )

    Hi SAP Gurus,
    I have a problem with Standard Asset reports S_ALR_87015066, S_ALR_87015065 in saving the layout. I need to save a layout and executed at all times to the user.
    Please let me know is there any config settings to do this.
    Thanks in Advance...
    Best Regards,
    Chandra.

    Hi
    I got the solution and found this configuration in SPRO.
    SPRO>IMG>Project systems>Information systems> technical report projects --> define profiles in displayed fields.
    Add the desired fields from the pop up and transport it.
    In IMG, WBS elements overview, in the pop up some of the fields are not displayed such as created by,capital code and RISK.
    But it is displayed in the PS-wbs element overview (s_alr_87015066) report pop up( try to add after executing report).
    Does anyone faced similar situation or any one have thoughts on this.
    Thanks in Advance..
    Best Regards,
    Chandra.

  • SAP 8.8 Crystal Report Layout problem in client workstation

    Hi Experts,
    We have import crystal report to SAP Business One as Form Layout or AP Invoice. We have already created the token DocKey@ so it would automatically be printed and will not ask for the document number. The layout works fine using the server workstation but in the client workstation we cannot proceed with the printing because when we click on the preview button, a login window appears with this details:
    Database Login
    Server Name : gray out or not active
    Database: gray out or not active
    Login ID: active
    Password: active
    We tried to enter the SQL login but fails.
    Is there any components that we need to install in the workstation before it could function the same way as PLD?
    Thanks,
    Janice

    You can try creating the ODBC connection, which is the same as on the server.
    Assuming this is the scenario:
    1. You write the invoice using crystal report on the server
    2. On the server, Control Panel--> ODBC, you have created an ODBC link eg; SAPB1.
    3. The report is connecting to ODBC link and pointing to database OECUS
    On the client workstation, you need to create:
    1. Control Panel--> ODBC, you need to create an ODBC link as on the server.

  • Report Layout Problems

    Hi
    I've got a report that I can never get it to print properly in A4.
    The report is an A4 letter. The last line of text cannot be printed at the bottom of the page. As long as I move it down a little bit at design time, when run it the line of text jumps to the next page.
    My other problem is that a report printing in LANDSCAPE, that I can never utilize the entire space on the page. It prints only about 70% of a page, wasting 30% space on the right.
    Can anyone help please?
    BTW, I am using Reports 10g (9.0.4).
    TIA
    Hien

    To view the paper size, click on a section (Header/Main/Margin) in the Object Navigator, and view the Width and Height in the Property Inspector.
    To view the size of the margin, go to the Report Editor, and click on the Edit Margin button.

  • Financial report layout problem

    Hi ALL,
    I have a financial report definition, which has 5 levels. Every level I have to show a total row, which is constructed by former total rows
    plus some new rows. I tried to use new Pivot functionality to construct this report ,
    but the problem is that in one column you cannot delete total rows selectively from the table, so you will have total rows for the single new rows also. This causes that you will have too much total rows, duplicate total rows at the highest levels.
    There is an example in the document "oracle-bi-ee-new-features-10gr3.pdf" about financial layout. It shows a correct Pivot report, it looks fine. But I cannot reconstruct this report.
    Can you tell me how they could delete in this example duplicated "Total Fixed Assets" and duplicated "Total Investments" rows which must have been there before?
    Thank you,

    I don't think so, but you could just put the dimension inside of the report, merely for the purpose of the end-user being able to see the actual dimension name.
    Thanks,
    James

  • Report layout problem when executing in Background

    Hi,
    I am executing one custom report in background with layout 'Z_65_400' . After execution, the report is generating spool number .
    But when I trying to see the output from the spool, here layout is coming differntly and with name 'X_65_255'.
    These are the latest packs in my system .
    SAP_BASIS     620     0064     SAPKB62064     SAP Basis Component
    SAP_ABA     620     0064     SAPKA62064     Cross-Application Component
    SAP_APPL     470     0030     SAPKH47030     Logistics and Accounting
    Could you please give the solution ASAP.
    Thanks and Regards
    NTR

    Hi
       Check you setting in SPAD Where is assign to the printer make Sure .
    Regards
    Nilesh

  • Crystal reports - layout problem

    Hi
    I imported one a the layouts in the .b1p package file (sales quotation) and proceeded to edit the layout according to the customer's requirements. Everything went well until I tried adding the OITM table (not included in the available tables in the report) via the database expert. When you add the table it has a myriad of links and the layout does not work anymore. Even if you delete all the links, and only link it to QUT1 on ItemCode, it still doesn't work. Even if you remove the table the layout remain defective.
    I then have to delete the report in the Report and Layout manager and re-import my saved version.
    Even just opening the database expert and closing it without doing anything, I get this message "More than one datasource or a stored procedure has been used in this report. Please make sure that no sql expression is added and no server-side group by is performed".
    Any ideas please?
    Regards
    Danie

    In the layout designer under either report options or options (under file menu) there is a "Use Smart linking" . Turn this off as this is why the links create themselves. It will link all your tables incorrectly.
    Once you have the option turned off, then add your new table & make the joins yourself.

  • Reports layout Problem

    We developed some reports in Oracle reports 2.5 and our
    operating system was Windows 98. Now we got the windows 2000. We
    installed the Reports 2.5 and reports 6i.
    Now when we opened the reports in reports 2.5, in the layout we
    say funny symbols, we fixed that by choosing the fonts, but
    still we can not see the frames and repeating frame boarders.
    I hope someone will be able to give some suggestions about it.

    hello,
    fact is, that reports 2.5 is was NOT supported with windows2000.
    so if you need to migrate to windows 2000 you will need to
    migrate to another version of reports as well. reports 6i
    release 2 is the first officially supported version with
    windows200 you might check if a current patchset of developer
    1.6.1 ( if that's the source of your reports 2.5) might solves
    the windows2000 support level.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Purchased Album Vanishes Overnight - no response from "reporting a problem"

    I purchased and successfully downloaded an entire album, listened to one or two of the songs, and then the next day - iTunes cant find the original files for any of the songs. I am not storing my music on an external drive, and all 2700 of my other songs are still right there where they belong in the iTunes Music folder.
    I've "reported a problem" every day at least once on the iTunes purchase history, but I have yet to get a response. That was one week ago today.
    My concern is not so much where did my files go nor how it happened, I work in the tech industry so I know that sometimes things like that just happen. My main concern is that I have reported a problem well over 10 times, and I have had no response.
    Am I just out the $9.99 for the album?
    Is this typical of how iTunes Support is?
    I've used iTunes for years now, and this is the first problem I have encountered in which I needed to use any kind of tech support - so I am unfamiliar with the process. Maybe I am not "reporting the problem" correctly, but it seems that there is really no other way to do it than:
    - *click on report a problem in the Purchase History section of my iTunes account page* -
    Any help would be greatly appreciated.

    Problem solved - emailed iTunes support via the web site, and NOT through the account history page in the iTunes application itself.
    I feel a bit silly for not trying that sooner...
    Oh well, lesson learned.

  • HT1933 Tried iTunes Store directive for reporting a problem. Got an ERROR message every time. Stuck with a NY Times app that won't recognize my subscription.

    Tried iTunes Store directive for reporting a problem. Got an ERROR message every time. Stuck with a NY Times app that won't recognize my subscription.called Apple and was told by an automated message to...use the ITunes Store directive.
    Can someone point me in the right direction.

    Hello atransient,
    Thanks for the question, that definitely sounds frustrating to encounter errors at the most important times.
    Let's see if the online Report a Problem works any better for you:
    http://reportaproblem.apple.com
    Thanks,
    Matt M.

  • Interactive report performance problem over database link - Oracle Gateway

    Hello all;
    This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
    The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
    query like this: (due to sensitivity issue, I can not disclose real table name)
    SELECT apex_item.checkbox(1,b.col3)
    , a.col1
    , a.col2
    FROM table_one a
    , table_two b
    WHERE a.col3 = 12345
    AND a.col4 = 100
    AND b.col5 = a.col5
    table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
    Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
    I would like to get ideas from people how to resolve or speed-up the query?
    Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
    Thank you.
    Shaun S.

    Hi Shaun
    Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
    By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
    Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
    WITH a AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_one),
    b AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_two),
    sourceqry AS
    (SELECT  b.col3 x
           , a.col1 y
           , a.col2 z
    FROM table_one a
        , table_two b
    WHERE a.col3 = 12345
    AND   a.col4 = 100
    AND   b.col5 = a.col5)
    SELECT apex_item.checkbox(1,x), y , z
    FROM sourceqry
    WITH a AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_one),
    b AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_two)
    SELECT  apex_item.checkbox(1,x), y , z
    FROM table_one a
        , table_two b
    WHERE a.col3 = 12345
    AND   a.col4 = 100
    AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
    We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
    Sorry for all the questions but it helps to answer the question, if I can.
    Cheers
    Ben
    http://www.munkyben.wordpress.com
    Don't forget to mark replies helpful or correct ;)

  • Itunes wont let me report a problem with multiple songs

    i wanted to buy ariana grandes old album but it wouldnt let me so i bought some of the songs because i thought i could complete the album but when i went back later it told me that if i bought the album i would have to buy the other songs i already had again and i didnt want duplicates and when i went to report a problem it wouldnt let me refund. please help i just want to buy her album once.

    Your first priority should be to change your password, since someone else has access to your account to download these items. You can go to http://iforgot.apple.com to change it. The link for iTunes Support is http://apple.com/support/itunes/contact/. Select the nature of your query and fill out the form, then you should see the email link.

Maybe you are looking for