Report layout wrong

HI,
We have a problem with a custom report, the report has several horizontal lines, but depending on who or maybe the computer where this report is run, these lines are not aligned correctly. So for some users, the layout is ok, but for other users is not ok.
Any help?

Hi,
please give some more informations about your issue.
But you can check the Customize Local Layout button (ALT+F12) before, if all users / computers have the same SAPGUI version (see option About) and the same font settings (see option Font(I18N)...) before that.
Regards
Klaus

Similar Messages

PDF Printing Issue - Customised Report Layout Error

Hi,
I am trying to get a PDF file output based on the customised RTF file created. I follow the following steps but I am facing an issue with that.
(i) Go to Shared Components > Report Queries.
(ii) Create a new Report query with more than one query.
(iii) Using the XML Data in the Report queries, create a Report Layout (RTF) file.
(iv) Navigate to shared components Report Layout and upload the RTF file.
(v) Once this is done, use the Report Layout created in the Report Queries. Select the Layout name from the Drop Down.
(vi) Click on TEST REPORT, this produces an error: Adobe Reader could not open the <file name> because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded )
Additional Info
The apex instance configured with Embbedded plsql, rdbms version is 11.1.0.7.0 and the BI publisher version 10.1.3.3.
ISSUE DESC
When I use mulitple Queries even after using Generic Report Layout I get the output for the first query alone in the PDF and the remaining Queries are ignored.
And when i use a user defined template, then even If i have a single report query I get the error.
To summarise, I am not able to use the customised Layouts.
I have reproduced the issue in apex.oracle.com
Please log in using,
WORKSPACE: demo_test
USER NAME: [email protected]
pwd: vidhya
After logging in please select the Application Builder.
In that select the Application named PDF.
Select the Shared components > Report Queries
Select the Report Query named test.
Click on the TEST REPORT button in the Source Queries Section.
You will get the error.
Now in the same page in the Report Query Attributes Section change the Report Layout to Use Generic Report Layout and then click on 'TEST REPORT', this will give the PDF file without errors.
The same report has been called from the PRINT REPORT button provided in the page 1 of the application.
This issue is really urgent and critical. Require your inputs/help.
Thanks,
Ramya

I' an APEX newbie and believe I am having the same or a similar problem. I am (for now) developing a system using the hosted Apex development system online. I have created a Report Query which works fine with the default layout. I downloaded the XML (tried both sample data and schema) into Word 2007 with the BI Publisher Template Builder. I used the table wizard to create a simple layout containing all columns with no customization at all. Saved as an RTF, uploaded to Apex as a Report Layout, associated it with the Report Query, clicked Test Report -- and I got nothing.
When the is a PDF, I get the same error you mention ( Adobe Reader could not open the <file name> because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded ). If I switch to an HTML file the out is just a blank screen.
If I switch back to generic report layout, it works fine. This suggests there is something wrong with the template, though it looks fine in Word with the sample data.
I've searched the forums and Google for the better part of a day. What am I missing?

Report Layout and Report Query APEX tables

Does anyone know a quick way to delete report layouts and report queries from the APEX tables that they are stored in. We currently have to go into the shared components area and delete them one by one using the builder. If we could just get the table that they are stored in and delete them by name, that would be extremely useful. Oracle does not support this type of data manipulation.
Thanks,
Andrew

Hi,
There are Top and Bottom – Left and Top and Bottom – Right.
I suppose that you have something wrong in the SQL Query or in the report.
Make a new report using the wizard. Then use Report Template – Standard and Top and Bottom – Left.
Konstantin

Matrix-Report - Layout-Problem

Hi,
In my report (matrix-rep.) is number of column larger than side-width.
Report continue printing on the next page, but I want, the report should print this on the same page bellow
How can I do this?
Thanks
Gregor

Title of this Forum: Forms
Title of this Thread: Issue with Report Layout
I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
Reports has its own forum dedicated to questions related to...reports:
Reports
You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
good luck!
cheers

Issue with Report Layout

Hi All,
I am working on a report which display employee present or absent in the month. I have to display dynamic column as days varies as per month .
I am done with the report design/query part, using matrix report layout. Report executes and produce expected output too.
Problem:
As this report consists maximum 33 columns (1 = employ name + 31=days in the month + 1=Total days present) I change Page Layout to Landscape.
When I select report output as "pdf" it generates report in Portrait Layout.
Could you please tell me how to fix this issue?
regards,
RSD

Title of this Forum: Forms
Title of this Thread: Issue with Report Layout
I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
Reports has its own forum dedicated to questions related to...reports:
Reports
You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
good luck!
cheers

Reports Layout- storing custom report layouts that aren't FOP/RTF

I am actually setting up a similar environment to the supported FOP processor, but with a JasperReports custom j2ee web application (WAR).
I am having some degree of success. Instead of relying on passing user/pass for a JDBC connection, I have reports mapped by XML elements. The reports just pick up off of the document already being sent with the xPath record root at /DOCUMENT/REGION/ROWSET/ROW.
I have planned on saving the jrxml reports as Report Layouts into APEX, so that the templates are also saved directly with the application and sent with the request, making the server side more of a dumb processor.
I have had some success in this setup except for what looks like one issue.
It appears that the jrxml remains intact on the upload, verified by viewing the CLOB contents of WWV_FLOW_REPORT_LAYOUTS.PAGE_TEMPLATE.
I was going to say that it appeared that the "+" characters were being stripped, but after starting up my packet sniffer, it appears that is is actually because the fields (xml, template, etc) are not url_encoded prior to transmission. They are getting to the OC4J server, but not read correctly by the default HttpServletRequest.
I realize that should this remain consistant, I can call the .Reader of the request object and actually pick up the POST parameters manually.
Question:
Is there anyway that this could be corrected in a future release, patch, or is there a way I can modify this behavior?
Am I the only one who has seen this or does anyone suspect I have done something wrong in my setup?
-Richard
Configuration
OS: Windows Vista 32bit
Database: 10gR2 XE
APEX: 3.2.0.00.27
OC4J: JDev 10.1.3.4 (running in debug)
Edited by: rwendel on Aug 5, 2009 1:48 AM - Added Configuration
Edited by: rwendel on Aug 5, 2009 12:15 PM - Shameless mid-day bump

I guess I have further confirmed this, by manually setting the particular character, "+" to its URL encoded equivalent "%2B" in the table WWW_FLOW_REPORT_LAYOUTS. After this, on receipt of the object at the Java receiver, it is formatted correctly. Furthermore, the getReader or getInputStream of the HttpServletRequest doesn't help because at this point it is empty.
I figure if all else fails, I can put a dreaded trigger on to the WWV_FLOW_REPORT_LAYOUTS, or an after the fact process to URL encode the contents. Heck, I am already unsupported as far as the printing goes, amirite
-Richard

Sales quote layout rows doubled in crystal report layout

Dear All,
Sales quote layout rows doubled in crystal report layout.
In sales quote layout the rows are doubled. Even in the standard layout. If the quote contains only two rows. Then it is doubled as 4 rows in the crystal report layout.
It is happening in the particular database. Other database are working fine. I request you people to help me to overcome this issue.
Regards,
Siva

Hi Siva,
If this is regarding CR in SAP B1 then please repost to the SAP Business One Application space.
-Abhilash

Huge delay in Printing Crystal Report Layout

Good Day Experts,
I am experiencing big delays when printing a document that makes use of a Crystal Report Layout Design.
For example,
The Sales Quote is set to automatically print when added by the user.
When clicking 'Add', SAP freezes up and only about 30 seconds later does the printer finally print the document.
During that time, the user cannot use SAP at all.
The layout does have a lot of fields and a few formulas here and there.
Logically, I am thinking that that is the reason for the delay, as SAP needs to calculate and populate those fields.
Is there any other way that I could speed up this process? Or if you know what might be causing this speed issue?
Your assistance will be appreciated,
Thanks
Regards
Dario

Hi Dario,
Pl Try the Below Threads and Ref SAP Notes Provided by NagaRajan.
http://scn.sap.com/message/13419121#13419121
http://scn.sap.com/thread/2024941
Regards,
Vamsi

Report Layout in report Painter

I created a Report in reportPainter. In the report layout, lead column section..I select Group Name to display the group name (set's id) in the report's lead column but not all the set's keys appear. It only appears children's ids but not the father's ids.
I also need the father's ids....why do I do to have the father's ids too?
Thanks...
Example
father set:
A Inventories
chidren sets:
A1 Raw Materials
A2 Obsolete Materials
In the report I only see the A1 and A2 ids and its descriptions. I also see the Inventories word. But I dont see the A key next to the Inventories description....why?

Hi,
Check whether the field in the internal table used for displaying ID is getting pouplated or not

How to link PDF document in Report Layout??

I need to display the contents of PDF document after the form letter report. I tried OLE object but at the runtime it does not display the content. Does any one knows how to attach PDF document in reports layout?
Thanks
Ravindra

you will have to concatinate your report output with the static PDF document. in reprots 10g you can create a cusotm destination that could implement this functionality.
out of the box, reports does not provide the ability to add static content in PDF to reports' generated PDF output.
thanks,
philipp

Oracle bi publisher report for apex - Report Layout

Hi There,
Navigation: Home>Application Builder>Application 20>Shared Components>Report Layouts
I created rtf template for a Report Query. It worked fine upto certain point.
However at some point, if I make a minor modification to the layout it is not displaying all the data that it is supposed to.
I have 3 tables in my RTF template 1) Header 2) Details 3) Summary. Details section has a group. This runs fine.
Now if I just combine all the above 3 tables into one by adding row above and row below to the "2) details" table and moving the table 1 and table 3 into those rows, makes the data in the group in table 2 disappear when run on the apex application.
However it works fine when data is loaded on the RTF template and Preview --> PDF is seen.
Is it a known bug? Because some of my coleagues has same issues.
Thanks
Krishna
Edited by: Krishna on Aug 9, 2010 10:08 AM

Hi, I think you need to provide more information.
user452458 wrote:
Hi There,
Navigation: Home>Application Builder>Application 20>Shared Components>Report Layouts
I created rtf template for a Report Query. It worked fine upto certain point.
However at some point, if I make a minor modification to the layout it is not displaying all the data that it is supposed to. What modification? added extra fields? Are those fields in the corresponding report query? change to the design of the document? did you delete the old template and re-upload after making the changes?
Moreover the preview on the RTF template works fine with the same data.Preview from where?
>
Is it a known bug? Because some of my coleagues has same issues.
Thanks
KrishnaAlso, you should change your display name to something better than user452458 ;)
Trent

Standard Report layouts in Crystal 2008 for SBO 2007A

It has been 2 years since SBO adopted Crystal Reports to become part of the standard product, I refer back to the initial links which promised links to Standard Reports, however 2 years later these links appear to be exactly the same, no updates.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88#section12 [original link is broken]
For SBO 8.8 there appears to be a pack of Reports available for Sales Orders, Purchase Orders etc
I would like to know if there a pack of standard Crystal reports for SBO 2007A and if so where would we be able to find them?
Many thanks
Kevin West

I found the following link
https://websmp101.sap-ag.de/~sapidb/011000358700001094082009
It has the following - Crystal Reports Layout - IT Invoice Layout for Release 2007 A
An invoice layout for Italy...well done 2 years and we now have an Italian invoice

Custom Report Layout with mutliple child tables

I am trying to create a custom report layout (using Bi Publisher) where I have parent data (multiple jobs on a page) and several child tables for each job (JobDays and JobStops) and several child tables for JobDays (JobDayProviders, JobDayCrew). On the apex screen, I have a join on Jobs and JobDays and I am using functions to string each child row value for JobDayProviders and JobDayCrew together and putting a <br> in between so that they will format on separate lines within a cell. It works fine on the screen but when trying to print to pdf, it ignores these line breaks. I have also tried using <br></br> (saw an article that said just use HTML in bi pulisher) which puts two lines in between each value on the screen and is still ignored on the pdf.
for example:
Table hierarchy:
Jobs table
Job Stops
Job Days
Job Day Service Providers
Job Day Crew
Report Layout per job (will have mutlipe jobs to print, just printing 1 day per job):
Jobs.col1 JobStops.row1 JobDay.col1 JobDayProviders.row1 JobDayCrew.r1
JobStops.row2 JobDayProviders.row2 JobDayCrew.r2
JobDayProviders.row3
Thanks,
Linda
First, is there a way to get bi publisher to recognize the line breaks? If not, what is the best way to create a custom report for this scenario? I tried to create a report query with mutliple queries, but cannot determine how to link the child queries to the paren query. I have seen an example where a button is pressed to print one parent row and the id of that row is saved and referenced as a parameter in each of the queries, but if printing mutliple parents on a report, how would I link the child queries to the parent query?

Helen,
The best way for your case is to use a content folder and customize it whichever way you like.
however, your question is about reports. the problem in reports is this that you have to use just one single query and the layout of the results of this query are displayed in a peculiar way.
anyway. something similar but not exactly the same as what you wanted do is the following.
use a query like the following: (with a union in between)
SELECT COLUMN1,NULL , NULL ,NULL ,NULL
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
UNION
SELECT NULL,COLUMN2 , COLUMN3, COLUMN4, COLUMN5
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
---------- Now, have the following codes in the layout segments:

<table border="0" cellpadding="1" cellspacing="1" width="20%" align="center">

<tr align="center">
<td><table border="0" cellpadding="1" cellspacing="0" width="30%" align="center">
<tr align="center">
<TH><#COLUMN1.FIELD#></TH>
</tr>
</table>
</td>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN4.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN5.FIELD#></TD>
</tr>

<TR><TD></TD></TR>
this should produce a report with a table structure (you may see the whole if you give BORDER="1" in the main table tag). Within this table, the first column of the first row should be showing top-leftmost column value once (COLUMN1 value) and then the next rows would show last four column values as a table block on the right-bottom part.
with kind regards,
naqvi

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

Purchase Order Crystal Report Layout Error

The stock Crystal Report Layout for Purchase Orders is giving me the following error:
A subscript must be between 1 and the size of the array.
Details: errorKind
Error in File POR20002 {b89f97ad-bf1f-447b-8bb4-b3d2e5219269}
{3C375C81-7D37-475D-9BCB-1703CE533B65}.rpt
Error in formula N_Decimal_Places:
'// To get the length of decimals
A subscript must be between 1 and the size of the array.
Details: errorKind
I looked in the Crystal Reports Formula fields and could not find N_Decimal_Places.
Has any one else had the problem with the PO layout that comes with Business One? If so, how did you fix it?

Couldn't find how to copy the PO layout over using copy express.
I did compare the RDOC fields for POR20002 in both databases and they are Identical.
In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing. Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places. When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
Again, SBODemoUS works correctly and AAA_TEST give the error.

Report layout wrong

Similar Messages

Maybe you are looking for