Report like MCEC work on actual data(MRP)

Dear All,
Is there any report like mcec that work on operative planning(MRP), bt not work on simulative planning.
I want the same data(purchase plan) after executing MRP.
Thanks

Hi
The transaction MCE7 is the one for operative data.
For more transactions, you can check all of the transaction start with MCE*.
Best Regards.
Leon.

Similar Messages

Can the summary report show the actual data in spreadsheet form?

We have several forms that we are collecting data from and are trying to find an easy way to analyze all of the data. The summary report just shows percentages of who filled out the forms. I would like to see the actual data from the forms.

The View Responses tab ~ there everything is in table form - you can import into excel etc and analyse from there.

How to get the actual data in ALV report

I am doing some upgradation work in that i am using Submit & And return and also i am using some function modules like LIST FROM MEMORY , LIST TO TXT wnd WRITE LIST , it gives output in normal list format , But i need to print in ALV report .
With the use of set table for 1st display i got the ALV report but not with actual data, (some junk value is showing) , So can any 1 suggest me how to get the actual data in ALV report, With the use of Any Function Module or with Coding,
with regards,

Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
 I have a requirement in reporting to display actual data from one cube and plan data from a different one.
 The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ... ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1 and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
 We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
 Plan Value is from CUBE2
Thanks
Kumar

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

Working offline with data from Access 2010 web database

Hello all,
I have an Access 2010 web database that I have published to a SharePoint site. Users currently work with the data via one of several Access 2010 front end applications that simply have linked tables and client queires, forms and reports. On a couple
of occasions, we have had issues with our SharePoint site that have left users unable to access the data. A couple of times it was due to our site collection suddenly and inexplicably becoming read only and the last time (while I was on vacation, of course)
due to some license changes my folks were unable to access the site.
I'm getting ready to go on vacation again. What i would like to do is have a sort of emergency back up plan should things go awry again while I'm gone.
What I envision is a back up database that has actual data tables, rather than simply linked lists, that I can sync with my SharePoint lists on a regular basis. That way, should the SharePoint lists become inaccessible, users could continue to work with
the data offline and any changes can be synced once a connection is restored.
I have read through
this article, but in each scenario I was unable to actually open tables to work with the data once offline. Is this a situation where I should simply have folks work offline with a local copy containing all of the data and then republish? Or, is there
a way to simply sync? Any thoughts or suggestions would be appreciated. I'm really hoping to leave my laptop at home on this next trip.
Thanks,
Greg

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay, appreciate your patience.
Thanks
Daniel Yang
TechNet Community Support

Provide brings back the actual date , different to the table content

Hi,
I´m not a developer, but must do that part now in my company.
We have a 46C with actual packages.
In a customer report I have to add 2 fields to an output.
It selects from PNP and provides data like follows:
GET PERNR.
PROVIDE * FROM P0000
FROM P0001
FROM P0002
FROM P0006
FROM P0007
FROM P0013
FROM P0016
FROM P0053
 BETWEEN PN-BEGDA
 AND PN-ENDDA.
That worked fine.
Now I liked to set 2 fields with contents of IT 0000 (table PA0000):
 IF P0000-MASSG = '01'. " MA aktuell im Vorruhestand ?
 TRANS-BEGVORRST = P0000-BEGDA.
 TRANS-ENDVORRST = P0000-ENDDA.
 ENDIF.
At debugging I can see, that the requested fields from P0000 are set to the actual date, not to the value I can select from table or shown in the SAP transaction.
All other fields from PA0000 are matching the row I expect, but not the date fields
Any idea?

Hi,
That is the behavior of PROVIDE statement. If you combine (JOIN) several tables (P0001, P0002, etc) together, it will give you all the intersected dates.
For example, in two tables itab1 and itab2, the respective columns col1 and col2 are interval limits of type i. The filling of the internal tables results in the following intervals (rows two and three):
| Itab1 Int1 | |Itab1 Int2 | |
| | Itab2 Int1 | |
| | ... BETWEEN ... |
| | i1 | i2 | i3 | i4 |i5| | <<<< This is the result
Regards,
Lim...
Edited by: Ruslim Chang on Apr 17, 2009 11:26 AM

How can i check the planned data vs actual data

How can i check the planned data vs actual data with the infocubes?

Hi Srinivas,
You create one cube for plan data and create another cube for actual data.
Create a multiprovider and give comparision report. this is betterway.
Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
Regards,
Vijay.

How to create a report like this.

Userid       logintime                                                    logouttime
367     2008-12-22 08:58:09.000          2008-12-22 10:18:02.000
369     2008-12-22 08:52:04.000          2008-12-22 10:18:13.000
371     2008-12-22 08:58:27.000          2008-12-22 10:36:24.000
374     2008-12-22 08:01:26.000          2008-12-22 10:17:54.000
375     2008-12-22 08:56:14.000          2008-12-22 10:18:16.000
376     2008-12-22 08:57:38.000          2008-12-22 10:17:57.000
463     2008-12-22 12:05:13.000          2008-12-22 13:01:39.000
450     2008-12-22 12:01:31.000          2008-12-22 12:14:42.000
from this data....i want to find how many people online each hour.
Time      Login
8AM         0
9AM     5
10AM     5
11AM     0
12PM     2
01PM     0
02PM     0
03PM     0
04PM     0
05PM     0

I don't think..both person's solution will work in this case.
My user table data is like this.
Userid          logintime                                  logouttime
367              2008-12-22 08:58:09.000           2008-12-22 10:18:02.000
369              2008-12-22 08:52:04.000           2008-12-22 10:18:13.000
371              2008-12-22 08:58:27.000           2008-12-22 10:36:24.000
374              2008-12-22 08:01:26.000           2008-12-22 10:17:54.000
375              2008-12-22 08:56:14.000           2008-12-22 10:18:16.000
376              2008-12-22 08:57:38.000           2008-12-22 10:17:57.000
463              2008-12-22 12:05:13.000           2008-12-22 13:01:39.000
450              2008-12-22 12:01:31.000           2008-12-22 12:14:42.000
from this data....i want to find how many people online each hour using a report.
Time              Login
8AM              0
9AM              5
10AM            5
11AM            0
12PM            2
01PM            0
02PM            0
03PM            0
04PM            0
05PM            0
i think this is not possible using report.
maybe i need to create a view in db from above table first and out of view should be report data...then just use report to display.
is there a better and easy solution than above?
nobody ever tried a report like this?.
we need group by time function in crstal...each hour, each 30 mins, each 15 mins etc...more time features..

Crystal report generation with Java Bean AS Data source on RAD

Hi,  Our company wants report generation in IBM RAD 7.0 using crystal reports with a Java Bean as data source. i HAVEN'T FOUND ANY ARTICLES TO WORK ON RAD. Any inputs appreciated.. Thanks,Manju

Look for Java POJO in the doc, i'm using RAD 7.0 and it's working like RAD 6.0

Title parameter: replacing sysdate with actual date

i have 2 parameters:say,
from_date = 10/OCT/2006 , to_date = SYSDATE
and what i'm trying to acheive is to print the parameters in the report TITLE.
when i use '&parameters' i see for to_date = SYSDATE instead i want to see the actual date the when the report was run.
is there a way i can do it...?

Michael brings up a fun little point.
Years ago, I used to extoll to users that parameters, calculations, etc. had to follow a standard (ie: calculations were labelled like: calc_today_date, calc_gl_code_fixed, etc., and parameters were labelled such as: parm_plant_code or parm_employee_name, etc.).
I then started teaching that as you don't see the parameter, you could label it however you like: ie: i_hate_my_job, my_boss_is_stupid, etc.
Boy was it fun when I discovered that if you chose to display the parameters in the title, you'd get the parameter label as well!
Suffice it to say, I do what Michael suggests. Create a parameter name with something that let's you display it - where the name says what it is (ie: from date, gl code, etc.).
Maybe at some point in the future, Oracle will add the concept of what's in the EUL for item properties, wherein you have a parameter id (where you could put in text what it really is) and a parameter label (how you want it displayed).
Russ

I keep getting this pop up. This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? Can you please help me figure out how to get this to stop!

This pop up has been occurring about once a minute when I am on certain sites.
This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
How do I get it to stop?

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History ->'' Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> Firefox will: select "Use custom settings for history" -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Crystal Reports XI stopped working error message on a Windows Server 2008

We recently installed Crystal Report XI in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
"Crystal Reports has stopped working"
Problem signature:
Problem Event Name: BEX
Application Name: crw32.exe
Application Version: 11.0.0.1282
Application Timestamp: 422d5c77
Fault Module Name: StackHash_1fc1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7ef2fbfc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 1fc1
Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
Additional Information 3: 2f92
Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
Any recommendation on what is causing this error?
Thanks,
Luis

Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
The error I'm getting when trying to start the service is:
The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

Problem between SSMS and Report ! Filter query not showing data or showing wrong data

Hi all,
In short: I have a report with multiple values such as name of shop, postal code etc. The parameters have no default value and act as "like". If someone enters "krant" he'll get all the shop names that contain "krant" in their
name etc.
Same goes for postal code, if someone enters 2550 he'll get all data for 2550. The problem although is that if a user start with postal code as parameters and leaves the shop name empty, the shop name is not shown in my report! The other way around it works,
when I enter shop name i'll get all shops + postal code in my report.
I know this is because POS name cannot be shown in report because it's left blank, but I want my MDX query to be able to give me the POS names even if I only enter postal code.
Can someone please please look at my query below? I need to add 4 more parameters this way later on too!
SELECT
[Measures].[Sales amount]
ON COLUMNS, NON EMPTY
Filter(
[Point of sale].[POS name].AllMembers,
InStr(
[Point of sale].[POS name].CurrentMember.MEMBER_CAPTION,
@PAR_POSName
) > 0
*Filter(
[Point of sale].[POS postal code].AllMembers,
InStr(
[Point of sale].[POS postal code].CurrentMember.MEMBER_CAPTION,
@PAR_POSTAL_CODE
) > 0
*[Point of sale].[Client id].[Client id]
*[Point of sale].[POS id].[POS id]
*[Point of sale].[POS street].[POS street]
*[Point of sale].[POS town].[POS town]
*[Point of sale].[POS housenumber].[POS housenumber]
ON ROWS
FROM [mycube]

You have to use
StrToMember (MDX) /
StrToSet (MDX) /
StrToTuple (MDX) to convert the Parameter; see
Parameterized Reporting Services Reports with Analysis Services as a Data Source
Olaf Helper
[ Blog] [ Xing] [ MVP]

Report like MCEC work on actual data(MRP)

Similar Messages

Maybe you are looking for