Report mail is too huge

I have been getting a new form of spam. When I click on the Cisco Email Security plug-in to report the email. I am getting this message "
Report mail is too huge."

Hello Lloyd,
check message tracking if those messages are actually scanned by IPAS, especial if you run a version lower than 7.5. 279kb is above the default threshold, so maybe your antispam scanner is not scanning them. I know this does not address the problem with the plugin, but just wanted to let you know.
Regards,
Andreas

Similar Messages

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

XML Pub: Purchase Order Report (Portrait) running too long

Hi:
"XML Pub: Purchase Order Report (Portrait)" running too long. It should be 1min. but now over 20min. This is 11.5.10.2 on unix.
The log file is like the following. It stops there. I checked another one ran before, there are more data...
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_report_type='R'
P_po_num_from='6640015'
P_po_num_to='6640015'
P_test_flag='N'
P_user_id='14955'
P_QTY_PRECISION='4'
P_fax_ind='N'
P_EMAIL_IND='N'
P_REQUEST_SOURCE='MANUAL'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/oracle/product/8.0.6finshdw/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oracle/product/8.0.6finshdw/guicommon6/tk60/admin/Tk2M
otif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
===============================================
From the internal Manager log:
Process monitor session started : 29-APR-2011 12:35:56
Internal Concurrent Manager found node APPSNOTE2 to be down. Adding it to the l
ist of unavailable nodes.
Process monitor session ended : 29-APR-2011 12:36:00
Process monitor session started : 29-APR-2011 12:38:00
Process monitor session ended : 29-APR-2011 12:38:04
Process monitor session started : 29-APR-2011 12:40:04
Process monitor session ended : 29-APR-2011 12:40:09
Process monitor session started : 29-APR-2011 12:42:09
Internal Concurrent Manager found node APPSNOTE1 to be down. Adding it to the l
ist of unavailable nodes.
Process monitor session ended : 29-APR-2011 12:42:15
======================
please advise.

last lines of FNDCPGSC29793.tx
)]:BEGIN :[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 10 seconds (10000 ms)
[ 1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Running loop from the top.
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
:-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsm.GSMQueueProcessor.process()]:BEGIN
:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsm.GSMQueueProcessor.read()]:BEGIN
:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Running loop from the top.
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.process()]:BEGIN
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:BEGIN
-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.process()]:On-Demand monitoring will not occur this round; the count is 3 out of 5
[Apr 29, 2011 1:19:5 :-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Resetting Error Count
[Apr 29, 2011 1:19:51 1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:BEGIN :1304097591452:Thread[ComponentMonitor,5,main]:0:-1:
-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 60 seconds (60000 ms)
[Apr 29, 2011 1:20:00 PM EDT] 1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:BEGIN
[Apr 29, 2011 1:20:00 PM EDT]: 4:-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 10 seconds (10000 ms)
Edited by: user9231603 on Apr 29, 2011 10:22 AM
Edited by: user9231603 on Apr 29, 2011 10:25 AM

WebI Report is taking too long time to opening

Hi All,
When iam trying to open the WebI report in Infoview , it is taking long time to open and refresh,
Please suggest me a solution.
Thanks in advance..
Regards,
Mahesh

Hi,
As the issue you are facing is that the webi report is taking too long to open and refresh, I would recommend the below steps.
1. Check whether the webi report is set to "Refreh on Open" if yes probably you need to uncheck, save the report and open it again.
2. Try to run the same query in the backend database and see if it returns the data.
3. Try to run refresh the report for a smaller data selection.
4. make the report run on a specific webi server, and when refreshing have your BOBJ admin monitor that process to see if the process is going in a hung state, using High memory etc.
5. restart webi process and run again
Thanks,
aKs

Install error : disk cannot be used to start up your computer [or] MediaKit reports partition (Map) too small

Greetings,
I am aware that this problem has been discussed, but in long and vague discussions that I had to sift deeply to find an answer. Therefore I am posting a clear message, as this problem can be very troublesome for someone who just received a Mac OS installation disk and cannot install it.
Situation : you cannot install/update your new system because the installer does not consider your volume.
Error message : this disk cannot be used to start up your computer.
Version française : Ce disque ne peut pas être configuré pour démarrer votre ordinateur.
Also discussed below error: "MediaKit reports partition (Map) too small"
Note : although this occurred with a Snow Leopard (10.6) install DVD, it can alo occur with Lion (10.7) according to discussions on Apple web site.
IF YOUR CONDITIONS ARE AS FOLLOWS :
- You are using an official Apple installation DVD of Mac OS 10.6 (Snow Leopard) [or 10.7 Lion] or an official download/upgrade of those systems.
- Your main Mac partition scheme is in GUID as it should be (check with Disk Utility). That partition contains a Mac system that can start-up.
- Your volume format is: Mac OS Extended (journaled) [the format should not be Case Sensitive.]
- You have the hardware requirements to install Mac OS 10.6 (Intel processor; internal or external DVD drive or a linked DVD drive; 1 GB of RAM; a screen controlled by your computer graphics card; at least 5 GB space on the hard disk or 7 GB if you install all components).
- Using Disk Utility, you of course tried the disk Repair Tool and the Repair Permissions tool.
- Your hard disk does not have a file called Backups.backupdb (if it does, this means Time Machine has once used this hard disk for its back-ups). Anyhow, if it were the case, the installation would give a different error message (with the word TimeMachine). This file may block the installation: Apple Support suggest to place it in the garbage, *without* deleting it, and placing it back on the disk later. Mind you, if you do not use this hard disk as such to save your Time Machine back-ups, you can simply delete this file.
HOW TO FIX :
1. Boot with the 10.6 install DVD (Tip: you can either select Mac 10.6 as the boot DVD in your Start-up Preferences or simply press down c during the start-up).
2. Above the install screen, you have a Utilities tab from where you can run Disk Utility. Select your hard disk and select the Partition tab. Resize the primary Mac partition (don't add a new one) by decreasing it by about 5 GB.
It will look like this http://i.imgur.com/jHTbr.jpg
( That image shows only one partition, but the same principle applies even if you have two or more partitions on your disk.)
Also see the official Apple how to: http://support.apple.com/kb/TS3926
Version française: http://support.apple.com/kb/TS3926?viewlocale=fr_FR
3. Commit the change by hitting "Apply"
3.b. If you get the error "MediaKit reports partition (Map) too small", this is a rare error where the partition that follows (for example Bootcamp) is slightly overlapping your main Mac partition. You will need to reduce that other following partition. Once you have reduced the other partition, you will probably need to return to step 2 and 3 and try again.
[ For example, in my case, I had resized my Bootcamp with CampTune software and it would seem that the file system ended-up somehow larger than the actual partition container. I simply asked CampTune to reduce the partition a bit (barely 2 GB) and that fixed it.]
4. Reboot, again into the 10.6 install DVD.
5. You can then install 10.6.
6. Once 10.6 is installed, use the Disk Utility on the desktop (you can boot into the primary HD at this point) to resize the primary partition back to its original or maximum size.
SOURCE (main fix): http://forums.macrumors.com/showthread.php?t=774410 [and] http://support.apple.com/kb/TS3926
SOURCE (explaination for MediaKit error): some Apple discussion post.
nb: in my case, it was on a MacBook Pro (late 2008).

GasMan4932 wrote:
When I click on the icon for this drive, the warning message below states "Mac OS X cannot be installed on 'iMac HD', because this disk cannot be used to start up your computer." Obviously that's not true, since that's where the OS is installed.
How did you partition this drive, if you did that? Does it contain start up or utility partitions for any other OS (for instance Linux)? There have been reports that the "cannot be used to start up your computer" message will appear if a third party utility was used to create a 'triple boot' system or such, apparently because SL is picky about the format GUID partition scheme table info & how partitions are allocated space on the drive by other formatting/partition methods.
For some users with these partitions, the fix has been as simple as "tickling" (slightly changing) the partition size of some partition with Disk Utility, which apparently updates the GUID partition scheme table info so that the SL installer accepts it as safe to use with SL.( In this sense, the message may be trying to say the installer thinks the disk can't be used to reliably start up your computer with SL, not in general.)
See the discussions topic Cannot install Snow Leopard over 10.5.8 for more about this.

Still the report is taking too much time

Hi All,
When i refresh a webi report the report is taken too much time to refresh(open).
In back end i have checked all the connections, contexts, cardinalities, joins, conditions...etc, in webi i have enabled the the check box 'query stripping'.
but still the report is taking too much time, i didn't identified the problem?
Please help me on this.
Thanks in advance..

Hi Mark,
How many queries are there--2
How many rows are returned--- 2000+
Are all measures defined with aggregates-- Yes
What is the array fetch size? (I1000 if it isn't already)

Disk Utility error "Mediakit reports partition map too small. 3TB

So I have a Mac Pro with a 3TB inside, but Snow Leopard won't recognize the whole 3TB. I can format it, but it only allows 801.23 GB. The remaining space is left as Free Space. When I try to resize the Volume, I get this:
I get this error: " Partition failed with an error." MediaKit reports partition (map) too small.
Can someone help me find a way to utilize the 3TB as it was intended to?
My setup:
MacPro1,1
10.6.8
ST3000DM001-1CH166:
Capacity:          3 TB (3,000,592,982,016 bytes)
Model:          ST3000DM001-1CH166
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
BK:
Capacity:          801.23 GB (801,225,752,576 bytes)
Available:          737.7 GB (737,702,121,472 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /

Anyways, i've made it work. My process was this:
Problem:
1. I put MacPro into Target Disk Mode to mount to my 2011 MacBook Pro. Disk Utility on MBP would only see 800GB.
Solution:
2. Booted the SL CD on the MacPro and ran Disk Utility from there. In the partitions tab, I chose 1 partition, and hit apply.
3. "could not unmount disk."
4. So I tried to partition it again, and it worked this time. 3TB Available.
5. I then booted the MacPro using an external HD with OSX on it to run CarbonCopyCloner to reimage my backup.
I hope this helps anyone else with the same problem.

Reports Mailing

I am running Reports 6.0 .
My Question.
1) I want to change the subject, add my own text in message box and attach the report generated from reports in pdf format, Mail to selected user automatically by calling the reports to be mailed from another report.
Now I am able to call report from another report using format trigger and generate report in pdf fromat and mail to users
I am not able to change the Subject and add Message text
Please suggest how I will be able to change the subject and add message text.
Hope I have explained the question properly.
null

Please suggest how I will be able to change > the subject and add message text.I tried it also, forget it!
After a lot of frustration about Report-Server and the Mail function (does anybody know the the story about the try to use the Report-Server 6i with Microsoft Outlook?), i developed my own Report-Mail-Tool. Now i use the Report Server to create PDF-Files and my own Mail-Program (developed with Powerbuilder) to send the files (i can send mails in the case of an error also) - That was my BIG HELP.
null

Sending mail take too long time exchange 2011 in iphone4

when i try to sending mail take too long time.
stay long time in outbox folder.
i'm using exchange 2011 in iphone4 with latest updates.

Hi,
This is a characteristic of some, but not all, ISPs, and not the SMTP itself. It involves DNS. See:
http://discussions.apple.com/thread.jspa?messageID=10391853&#10391853
Ernie

Report file version too old

Hi, I hope I am in the right forum. I downloaded crystal report viewer 2008, but need to view a report that was created using an earlier version. The error message I get is as follows, " Report File version too old. This report was saved from a version of crystal report older than version 9 and cannot be viewed. To fix the problem please open and resave the report from a version of the crystal report designer application at least as recent as version 9".
How do I do this. I cant seem to get the older versions on the net anymore. Please help

The error message says "at least as recent as version 9".So, you can try with any version after 9.Following is the link to download a free trial version:
http: //www.businessobjects.com/product/freetrials.asp
You may try with Crystal Reports XI or Crystal Reports 2008

Sender from Report-Mail

Hello,
I have to change the sender-Adress from Report-Mail. Can somebody tell me how I have to configure the sender-Adress. At the moment I get the sender-Adress oracle@<servername> when destype=mail.
Thanks
Heike

You can specify the e-mail address in the parameter FROM.
destype=mail FROM=[email protected]

Report script taking too long to export data

Hello guys,
I have a report script to export data out of a BSO cube. The cube is 200GB in size. But the exported text file is only 10MB. It takes around 40 mins to export this file.
I have exported data of this size in less than a minute from other DBs. But this one is taking way too long for me.
I also have a calc script for the same export but that too is taking 20 mins which is not reasonable for a 10MB export.
Any idea why a report script could take this long? Is it due to huge size of database? Or is there a way to optimize the report script?
Any help would be appreciated.
Thanks

Thanks for the input guys.
My DATAEXPORT is taking half the time than my report script export. So yeah it is much faster but still not reasonable(20 mins for one month data) compared to other DBs that are exported very quick.
In my calc I am just FIXING on level 0 members for most of the dimensions against the specific period, year and scenario. I have checked the conditions for an optimal report script, I think mine is just fine.
The outline has like 15 dimensions in it and only two of them are dense. Do you think the reason might be the huge size of DB along with too many sparse Dims?
I appreciate your help on this.
Thanks

Bug report: Mail sends messages with empty bodies

Over the last year, I have experienced a particularly irritating bug in Mail.app at least a dozen times. I finally have a good idea as to what causes it.
The problem involves long email messages (often with attachments) that end up being sent with blank bodies (and no attachments). Even the copy in the "Sent" folder ends up blank, and several minutes or hours of work vanishes into thin air, not to be seen ever again.
I finally realized that this bug only occurs when sending mail through our work SMTP server while outside the work firewall, and only as a result of a certain sequence of events. Here is what happens:
When we connect to our work SMTP server from outside the local network and without going through the VPN, the SMTP server requires password authentication. If the current SMTP selection in Mail.app is the one that does not require authentication, the SMTP server rejects the message. At that point, Mail.app opens the email I am trying to send and brings up a modal dialog that says "Cannot send message using the server xxx.xxx -- The server response was: xxx@xxx relaying prohibited. You should authenticate first." The dialog also presents a drop-down list of SMTP server choices. I choose the password-authenticated version of the server and then click on "Use Selected Server" to send the message.
This works almost all the time, but on occasion it ends up sending a blank message! If I have a long email, particularly with attachments such as PDFs that are rendered in the body of the message, it takes a few seconds for the mail message to be rendered underneath the modal dialog box. Since I am used to this STMP rejection behavior, sometimes I am too fast to choose another STMP server from the list and click on "Use Selected Server" before the mail message is rendered on screen! The result, invariably, is a blank email message that gets sent.
I guess what is happening is that when the STMP server rejects the message and hands it back to Mail.app, the message gets copied into a buffer in order to be displayed on screen. Selecting another server and resending it immediately (before the message is copied into the buffer completely) causes the message body to get trashed.
I hope that this description is adequate for Apple QA folks to replicate and isolate the problem (and hopefully fix it). One solution (although not the most elegant one) would be to disable the "Use Selected Server" action until the message is copied into the buffer and rendered on screen.

This could be related to another bug reported here recently:
E-mail looses all images if mail server doesn't accept outgoing email...
You cannot count on Apple looking into this or even noticing it if you report it here, so I suggest you the same I suggested in the other thread, i.e. report it in one of the following places:
http://www.apple.com/macosx/feedback/
http://developer.apple.com/bugreporter/

My yahoo mail page is huge font. How do I get it back to normal font?

I started using foxfire, but for some reason when I go to my yahoo mail the font size is so huge. How can I correct this so the e-mail font is normal again. This has only happened to my e-mail and if I open an attachment it has large font too.

Try to press '''[CTRL]''' + '''[+]'''.
More details: [[page zoom]], [[text zoom]].

Web reports parameter form is huge!

has anyone encountered a problem where the parameter form for a
web report is abnormally huge?
a look at the html source indicates that the sizes used for the
height, width, etc are in the thousands. the same report and its
parameter form work fine in client server mode.
compaq true 64 unix
reports 6i + patch 5

hello,
this might be related to the X environment your DISPLAY is
pointing to. some x-environments cause the parameterform to be
rendered too big.
regards
the orcle reports team --pw

Report mail is too huge

Similar Messages

Maybe you are looking for