Report Manager 2008 r2 - prompts for username/password & does not accept

Hi all,
I am dealing with an extremely frustrating problem with Reporting Services 2008 r2, Report Manager, and would greatly appreciate any help.
I have installed Reporting Services, with Report Manager, onto a Windows Server 2008 r2 install.
When loading Report Manager (http://server/reports), I get prompted for a username/password.
No matter what I type in, I get prompted a 2nd time, then a 3rd time, then a blank screen loads up.
@#$@#??!?!!
How can I get past this username/password challenge - remember this is SQL 2008 r2 so IIS-based solutions are not relevant.
Thanks again,
Jason

Hi Jason,
Did you follow the solution i mentioned at another your thread
http://social.technet.microsoft.com/Forums/en-US/sqlreportingservices/thread/4f3651cb-c608-4460-a45a-9337df2ab88a ? This is very common issue in SSRS 2008 and the solutons have been summarized at this blog
http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx , and also applies to SSRS 2008 R2.
Note:by using the default installation, the rsreportserver.config file is stored at C:\Program Files\Microsoft SQL Server\MSRS10_50.instance\Reporting Services\ReportServer
please let us know the result.
thanks,
Jerry

Similar Messages

Changed itunes apple password. iCloud asked later to put in iCloud password. Used changed apple password iCloud doesn't accept it. Tied old iCloud password does not accept that either. Don't know what to do

Changed itunes apple password. iCloud asked later to put in iCloud password. Used changed apple password iCloud doesn't accept it. Tied old iCloud password does not accept that either. Don't know what to do

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Windows not prompting for username/password

I'm trying to access my NAS200 via a Windows Vista Home Premium computer. It sees the drive but when I open it I can only access what's made available to 'guest'. I'm trying to login with the admin credentials so I can see shared folders that only admin has access to.
I tried mapping the drive and using the admin user/pass but that doesn't work either. If I try to access a folder directly such as \\nas200\private - windows says it doesn't exist when it clearly does. The only way I'm able to access my files at this point is through the web interface which is not good enough since I need to perform backups to a private folder.

I went to edit a user and it wouldn't let me, so I powercycled and it worked. Now I want to change permissions on the folder for that user but when I click save the permissions do not save.
When I updated the username to match my windows user profile name, it gave me share access based on the username in the NAS settings. It didn't ask for a password or anything. So in theory if I change my windows profile to admin then I'll have admin rights on the NAS.
What the hell is going on here?

My calendar is asking for Google password but not accepting it

It just happened now, out of the blue. My email accounts work well but my calendars keep popping up asking me for my Google password but they don't accept it.
I use Thunderbird version 31.2.0, Lightning 3.3.1 and Provider for Google Calendar 0.32 (the latest version doesn't work at all)

I have the same problem.
Last month i did the fix (desinstalled provider and lightening and relinked agenda to google calendar and disabled the autoupdate)
Since then everything worked and i did not touch anything. Nevertheless all of a sudden, agenda started to ask for my password but don't accept it and then says that an error has occured while preparing the agenda which won't be available.
[Exception... "[xpconnect wrapped nsIURI]" nsresult: "0x804b000a (NS_ERROR_MALFORMED_URI)" location: "JS frame :: resource://calendar/modules/calUtils.jsm -> file:///C:/Users/C%C3%A9cile/AppData/Roaming/Thunderbird/Profiles/k9ktyvla.default/extensions/%7Ba62ef8ec-5fdc-40c2-873c-223b8a6925cc%7D/js/calGoogleCalendar.js ::
And indeed, its impossible to check the agendas boxes

Router No Asking For Username/Password

Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.
Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.
I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting usename and password? However, once there you can go right into the setup screens by clicking OK.
I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or myrouter.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.
I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.
I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.
I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.
I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
Again I hope SOMEONE from Cisco sees this and investigates.
Thanks for allowing me to "rant".
Dave

Thank you zee29 for the reply however, when I change the router password under administration I'm presented with a screen that says the router's password has been changed on my next Cisco Connect startup. I click OK and then I'm presented with a screen that says BOTH passwords must be the same. This is crazy. My router is not secure on my desktop. Anyone who uses my desktop and wants to "fish" around can enter my router's settings without being presented with a password prompt.
And I'm still presented with the problem of connecting via 192.168.1.1. or myrouter.local using IE 8 in which a "page cannot be displayed" message appears. I can log in via Google Chrome however, once I enter the username and password once I'm able to access router without being prompted. The network isn't totally secure.
I have seen other posts where these Cisco routers are having "problems" when using IE. It would seem to me that Cisco would want to rectify this situation. Its not like I'm running a beta operating system that Cisco is not aware of. I'm running an XP system that is totally updated.
I've been running Linksys/Cisco routers for years and have never had these problems. If these "problems" continues I will have no choice but to purchase a router from another company such as Netgear and say goodbye to Cisco.
I want and need a SECURE network.
Dave

The report does not accept the value for apps.fnd_profile.value('USER_ID')

Hi,
I followed the below note and added a report to my SSHR menu.
How To Add A Report To A 11i Self Service Menu [ID 334847.1]
In my report , I have a condition in the query
and a.created_by =apps.fnd_profile.value('USER_ID')
When the report is submitted as a request , it works fine., however the same report when called from the self service page does not accept any value for apps.fnd_profile.value('USER_ID') .
Is there a workaround to handle this problem.
regards

hi,
I had already tried the option apps.fnd_global.USER_ID too.
However it does not accept the value for apps.fnd_global.USER_ID.
We want to call the reports in SSHR using oaf and at the same time the records that are pending for approval created by the employee should only be visible.
regards
Maya

Micrsoft Outlook somtimes prompting for username and password

hello All ,
I Have Exchange 2010 sp3 installed two mailbox servers & two HUB & CAS Servers and Outlook sometimes prompting for username and password .
how can fix it .
Thank you

Hi,
Please check the following points:
1. Does the issue happen to your external users or internal users?
2. For all users or some specific users?
If the issue happens to internal users, please configure the authentication in Outlook Security tab with Negotiate Authentication to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Network printers prompting for username and password

With the more recent OS upgrades I can now see my printers on my home network. Very cool. When I select one to print, I am prompted for a username and password. I have tried my network keys with no luck and cannot set a password on my printers. Is this unusual and if not, what should I be using?

You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
You can check also this article
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
MCITP|MCTS SharePoint| SharePoint Performance blog

Lync keeps prompting for username and password.

Hi All,
Lync 2013 prompt for username and password. The request for username and password happens intermittently.
Appreciate any help.
Thanks
denciod

This kb is helpful to troubleshoot this issue:
https://support.microsoft.com/en-us/kb/2298541
There are solutions for Lync users and Lync administrators, choose the method depending on your role.
-Jeff

Prompting for username and password for opening

Hi,
The domain of my organisation is xyz.com. So when try to access any office doc from the office network it opens the office docs without any prompt in office client. But whenever try to access them using VPN or citrix it asks for the username and password.
Then if I give credentials or cancel it irrespective of that it opens the doc for me.
The sites are in trusted zone. It is happening for 2010 and 2013 both. But for pdf it is not prompting.
Why it is asking for credentials and how to mitigate this so that it opens directly from everywhere.

You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
You can check also this article
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
MCITP|MCTS SharePoint| SharePoint Performance blog

Outlook 2013 on Windows 8.1 keeps prompting for username and password.

Hi,
I have a HP Pavillion TouchSmart laptop with MS Windows 8.1 OS. I had installed MS Outlook 2013 Standard. This laptop is joined to the domain like many of my users, however, it keeps prompting for username and password. The emails are still able to send
and receive without any problem.
I have tried to check the connectivity, both cables and wireless are well connected.
I have tried to reinstall the Outlook 2013, but it still occurs.
Attempted to recreate profile but it still occurs.
For the configuration:
I have selected negotiate authentication, and have unchecked the box that states
"Always prompt for login credentials"
Please advise.
Thank you.

Hi,
We can also follow this forum FAQ to troubleshoot this problem:
Why does Outlook keep prompting for password
http://social.technet.microsoft.com/Forums/en-US/bcd2d9c2-1a1b-4446-bf32-69fee8cdf11b/why-does-outlook-keep-prompting-for-password?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Word 2010 prompts for username and password when opening a document on trusted website

Hi Guys,
We have a website (not sure if the site is a sharepoint site) on our trusted domain that asked for username and password when trying to access it. I added the site to our trusted sites zone and this resolved the issue however when I try to open word documents
I get prompted for usernames and password again if I cancel the credentials box the document opens with no issues.
Below is some of the steps i have taken
- Tried opening other non office documents (e.g. PDF, JPEG) and they open with no issues
- Tried to opening the word documents with a system that only had word pad install and not Office 2010 and the documents open with no issues so it looks like it's an office 2010 problem
Can you please advise how I can resolve this issue and if this is a client issue or an issue on the web server thanks

Hi,
This issue is caused by the Office suit itself. When Internet Explorer opens an Office document, the appropriate Office application is started with the path of the document. The Office application then tries to access the document directly from
the server. This differs from other browsers and other file types. Most browsers download the file and call the application to open the file from the local cache. However, when this occurs, if the opened file is changed and saved,
the changes are only made to the local copy and not to the server copy.
To establish the richest experience possible, the first thing that the Office application does is communicate with the server to determine the server type and what web authoring protocol is available. The application does this by making
an OPTIONS request directly to the server.
As a new process accessing the server, the Office application is required to renegotiate authentication. This method is more secure than a method in which the new process uses an existing authentication that was established by the browser.
Please try the following methods:
An alternative with full functionality but with a calculated risk
Client approaches that can reduce the impact
Alternative configurations when the web server does not support DAV or reduced functionality is acceptable
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/2019105/en-us
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

OEM prompts for username and password

Hi,
We have on 11g database and if we try to click on performance tab it prompts for user/password. How to avoid this? My user account is active at database level. Not sure why it prompts again. This is not happening for all databases.

Well "myname" is that a user with sysdba privilege also you would want to investigate the following link suggestions.
Enterprise Manager "Performance" tab is suddenly disabled.

Users prompted for username and password after sharing removed from servers

Hello Community
    On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should. However it was noticed that from a users computer when in "Windows Explorer" if "Network"
is clicked the 2 servers are visible.
    The problem is that when the server are clicked on in Windows Explorer the files and folders on the hard drive of the servers are visible too.
    Subsequently I logged onto the server and when into "Properties' - "Sharing" and
unchecked the checkbox to "Share this folder".
    That solved the problem of the users being able to see and access the files
and folders on servers hard drives but now when the users log onto the intranet
they are prompted for a user name and password and even when they provide the user
name and password and the page is returned the prompt appears on the screen again(then they cancel out).
    What can be done about the user being prompted for username and password without sharing the drives on the servers ?
    Thank you
    Shabeaut

What exactly was shared out from the SharePoint server's file system? There are certain things that are shared by default.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Prompt for username and password when executing servlet

In Weblogic 5.1 when I set the username and password in weblogic.properties file, it prompts for the usertname and password when I execute the gatewayServlet
weblogic.allow.execute.weblogic.servlet.servlets/gateway.administration=vijay
weblogic.password.vijay=password
But I guess this is not the way it can be implemented in 8.1. Please let me know how I can prompt for username and password when executing the servlet. I dont want it to be done programatically. Please let me know whether I can set anything on the properties file.
Thanks
Vijay Subramanian

You can use Apache ACLs, http://httpd.apache.org/docs/1.3/howto/auth.html
GoodEvening!
I'm developing a web application using jsp
technology.
When the user digit:
http://<machine address>:<port>/<applicationName>
I would that a browser prompt login is diplayed to
the user for enter him username and password,
before loading the index.jsp page. Is possible
without using awt or swing components?! using only
the browser's prompt dialog?!
p.s.
sorry 4 my bad english! ;-)

Report Manager 2008 r2 - prompts for username/password & does not accept

Similar Messages

Maybe you are looking for