Report Manager - Data collection

Hi,
I'm having problems with data collection on a number of servers.
Essentially, I've configured data logging on a number of servers
by creating a job in the 'Manage jobs' window, using the task type
'data logging' and running it against a number of hosts.
Unfortunately, when I look at the 'data collection' window via report
manager, a number of host entries have an excamation mark attached
which implies that data has not been collected. If I look at the attribute editor for one of the logged entries on an affected server, the history tab
clearly states that the 'Save History as Disk_File' is ticked.
Any ideas?

I have also seen this issue. Some of these issues were fixed by checking
DNS. For data collection to work both forward and reverse DNS must work
for the agent. If there is a mismatch or missing DNS it doesn't work.
If there is a mismatch in DNS sometimes a re-discovery is required.
Hi,
I'm having problems with data collection on a
number of servers.
Essentially, I've configured data logging on a number
of servers
by creating a job in the 'Manage jobs' window, using
the task type
'data logging' and running it against a number of
hosts.
Unfortunately, when I look at the 'data
collection' window via report
manager, a number of host entries have an excamation
mark attached
which implies that data has not been collected. If I
look at the attribute editor for one of the logged
entries on an affected server, the history tab
clearly states that the 'Save History as Disk_File'
is ticked.
Any ideas?

Similar Messages

Performance Report Manager Data Collection Issues

I have an agent running and collecting data in a circular file.... history.log
Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
If you can provide any information as to what to look for, please reply.

history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
Regards,
Mike
[email protected]

When or How does the time stamp on Report Manager / Data Collection change

Hi,
I have been waiting since 10am waiting for data to be available. Unfortunately, the Sun MC has not updated the time stamp. I am unable to create graphs for the machines I setup this morning? Any ideas on how to post data faster than waiting forever for Sun MC server?
thanks

Hi,
Clearly a bug. You can try changing your Tools|Preferences|Database|NLS|Timestamp Format to match the Date Format as a workaround. Otherwise why not upgrade to the lastest production SQL Developer release (3.1.07.42)? The bug does not occur there.
Regards,
Gary
SQL Developer Team

Campus Manager Data Collection always Idle

Hello,
Every time I start Campus Manager Data Collection, I get a window "Notified server to run Campus Data Collection" but status always stay Idle (not running).
LMS 3.2
Campus Manager 5.2.1
Thanks

most likely you are hitting the following bug CSCtd49439

Performance Report Manager not collecting data

I'm running SMC 3.6 with the Performance report manger module installed on the server and hosts. The hosts are logging data to their circular file. But when I open the Report Manager then Data-Data Collection there are no hosts listed in the "Hosts with Data Collection Enabled" or "Hosts with Data Collection Disabled" fields.

PRM is sensitive to host naming issues. If your SunMC Agent resolves it's IP backwards to "hostA.mydomain.com" and your SunMC Server resolves that same IP backwards to "hostA" (or if the situation is reversed) then you'll have problems.
If you do find a mismatch (but SunMC is otherwise running fine - indicating the security is still valid) simply try deleting the icon for a host and recreating it with the proper name. I.E. erase the icon you made for "hostA" and replace it with an icon for "hostA.mydomain.com". It will look and feel the same in the Console, but PRM will treat it differently.
Note that PRM only collects data from the Agent every hour, so it may take that long for your changes to show any effect.
Regards,
[email protected]
http://www.HalcyonInc.com

Please help with creating a summary report from data collected in a fillable PDF form.

I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
FORM 1:
-pt chart #
-pg age
-purpose for visit
-date of visit
-diagnosis
-prognosis
-etc
SUMMARY page
On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
Does anyone know how I can do this?
Thank you all for your time and advice!

I have downloaded Castor and got some good tutorials, but.......
There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
Hope you can help

Campus Manager data collection

Hi
I am getting all the cisco devices discovered in DCR but missing one of the 6513 in the data collection which is already there in DCR.It is also missing in the topology diagram.However this 6513 is reflected in all other modules like DFM , RME and Cisco view.What could be the problem.
Sanjay

Does the device have cdp enabled? If you add it as a seed device does it show up in CM topo services?

LMS 3.2 CM, data collection stays running forever

Hi There
I have a customer who has LMS 3.2 Solaris. His CM, data collection, is in a running state for more than two days.
I am almost sure this is a bug, do you have any advice for me please.

see this thread:
https://supportforums.cisco.com/message/1322774#1322774
perhaps you are hitting BugId CSCtd49439
CSCtd49439 Bug Details
Data Collection never completes, and UT acquisition cannot run
Symptom:
Campus Manager Data Collection does not stop. It is reported as always
running in
Topology Services. Additionally, User Tracking acquisition does not run due
to XML files
being written.
Conditions:
This will occur if there are any standalone Access Points being managed by
Campus
Manager. Other devices can also cause this (e.g. old 1200 series switches).
Workaround:
Filter out standalone Access Points and other affected devices from Campus
Data Collection
under Campus Manager > Administration > Data Collection > Exclude Devices.
A patch is available by contacting TAC.

Campus Manager No Data Collected from Network

Just intergraged CiscoWorks with ACS. Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
No Data Collected from Network
1.Devices are not availiable from DCR or
2.You have not performed data collection at least once
When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
We could see devices fine before the ACS intergration but now, we cannot see any devices.
Any thoughts?

The devices (original clients) that I defined are as follows:
10.0.1.*
10.0.10.*
10.0.2.*
I was able to see these clients. Deleted the above clients from ACS and added:
10.0.1-10.*
So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
I can still see the original clients only. The others show up in Devices not configured in ACS report.
What do I need to do? What did I miss?

CHaRM Reporting Data Collection Background Job

Hi CHaRM Gurus,
I saw lot of thread about data collection for CHaRM Reporting using /tmwflow/Config_lock. Question is do we need to run everytime before run the report or is there anyway can schedule in background to collect data Asynch. There is a SAP Note 1269192 applied in both Solution Manager and Managed system. If any job to schedule what job and the ID to use run what authorization. Because this job need to collect transport request and objects, so definitely required different authorizations.
Thanks
RS

Hi,
The job is SM:TMWFLOW_CMSSYSCOL, program /TMWFLOW/CMSSYSCOL2. The data collector program requires additional authorizations for Read RFC user you have defined for client '000' of the satellite systems.
Authorization object: S_TRANSPRT
ACTVT = 03 and TTYPE = <*> (full authorization)
Refer to note 881553 for authorizations.
Thanks & Regards,
Kriti Bhalla

How to Use Solution Manager to collect Status Reports from Consultants

Hi,
I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
BR,
Raj

Hi Rajasan,
to be able to meet this requirement, you need to set up plan working load in admin tab for your resource, they need to update actual data based on the work completion, you will get status of work,
if you require email, you need to set-up scot, then develop a program with execution scheduling
please check and revert
Anil

How to Check UPL data collection at Solution Manager

Hello,
I had activated UPL data collection as per the document How to Guide –SAP Custom Code Management Usage and Procedure Logging.
I can check UPL data in my managed system by Report “/SDF/SHOW_UPL"
But I am not able to get the same data in Solution Manager by this same repot (/SDF/SHOW_UPL).
When I run this report in solman it show me only Solution manager data.
How I can read Manage System data in Solman? And what are the check point (for both Solman and Manage system) I need to check for ensuring my UPL date collection is working fine.

Set up CCLM and the custom code setup and you will be able to view UPL data that way,

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Data Collection in Campus Manager hung

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I am running LMS 3.2 and Campus Manager 5.2.1. My data collection in Campus Manger for my devices does not complete and runs indefinitely. It has been hung in the "running" state for the past week and will not complete. I only way I found to get it out of the "running" state is to reset the ANIServer service and reboot the server. I have had this problem since I have upgraded to LMS 3.2. Does anyone have any input of this issue or possible solutions?

The data collection hung again as expected over the weekend. The ANI.log file grew to 1.8 GB again. It is to large for me to open it. I could try to split it up into smaller files. What should be my next course of action?

Report Manager - Data collection

Similar Messages

Maybe you are looking for