Report MPs not appearing

hi
i have installed SCSM 2012 datawarehouse server with Reporting services in the same server.
In SCSM console, reporting tab is not appearing and it says reporting services unavailable error.
When i see Management packs under Datawarehouse, only two management packs are shown for the query "Report"
SErvice manager linked reports
service manager reporting presentation pack
Other than these two, no other report related mp are shown.
If i go to properties of MPSync job, there is nothing MP status shown as pending or failed. All says associated.
This means no reporting MP has been deployed.
If i see Operations manager event viewer, it gives the below event id
Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Web.Services.Protocols.SoapException: The item '/SystemCenter' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException:
The item '/SystemCenter' cannot be found.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
   at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
   at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
   at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
   at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
   at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
   at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
   at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
   at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation
I was able to connect to the Reporting services url which i have mentioned during SCSM DW installation. The service also started and running.
What could be the reason for not deploying the reporting MPs?
regards Sundaresan.C

Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Web.Services.Protocols.SoapException:
The item '/SystemCenter' cannot be found. --->
Can't find the System Center Folder in SSRS. possible it was manually deleted before deployment was complete?

Similar Messages

Characteristic Name of Sales Employee in COPA report is not appear

Characteristic Name of Sales Employee in COPA report is not appear, it is just the a Code of Sales Employee
1.I created Characteristic Derivation t.code KEDR Table lookup PA0001 using condition Origin GLOBAL USERTEMP1 until USERTEMP6
2.During Test Analyze Derivation there was result Derivation was not carried out. Reason: Not fulfilled in Field USERTEMP6
How to solve this problem?
Thanks & Regards,
Cyrenia

You need to use Characteristic Derivations for this to work.
In transaction KEDR, maintain a "look-up" and provide your Reference table as VBPA and your target field will be the COPA Characteristic that you defined for the Partner Function Sales Employee.
Select the Characteristics that will allow you to determine the Sales Employee (Partner Function = "VE") and then map the KUNNR field to the COPA Value Field.
This will allow the flow of Sales Employee Values into COPA and hence the description as well.
Hope this helps.
Cheers.

Update control report did not appear

Dear Experts/Gurus,
I am confusing after upgrade database version 2004A SP 00 PL 41 to SBO 2005A SP 01 PL 29, the update control report did not appear but when I upgrade database SBO 2004A SP 00 from PL 20 to PL 41, it appears after logon. Why could it be happened ? I appreciate your answer. TIA
Rgds,
Steve
"ratify kyoto protocol"

Steve,
Not sure why that may happen. You may want to enter a message with SAP Technical Support on this issue as you may get a quicker response as this forum is for questions related to the Business One SDK.
Eddy

Option to email a pdf from an access report does not appear.

I upgraded to windows 8, and now the option to email a pdf from an access report does not appear.

Hi anne,
Could you please let me know what Acrobat and OS version are you using.
Does this happen in case of any particular PDF or all PDF files?
Try repairing Acrobat and then again check.
Hope to get your response.
Regards,
Anubha

Oracle Report: Header not appearing in spreadsheet

Header section is not appearing in spreadsheet when I am running the report to print in spreadsheet

I am having a same issue. It skips the healer in Spreadsheet output. The reports server is 10g.
Do you have any workaround or solution for this?
Thanks,
Dean.

Report 10.1.2.0.2 - DESFORMAT=spreadsheet - Report does not appear

We use Report 10.1.2.0.2 - DESFORMAT=spreadsheet
RDF Report try to appear for 1 second and then disappear.
In the report there isn't image or particular object.
There is only one grid from db table.
The form coll the report with this procedure:
PROCEDURE RUN_REPORT_OBJECT_PROC
( rep_fileobj VARCHAR2,
rep_filename VARCHAR2,
rep_server VARCHAR2,
rep_desformat VARCHAR2,
rep_desname VARCHAR2,
rep_destype NUMBER,
rep_paramlist PARAMLIST ) IS
-- Local var
rep_id REPORT_OBJECT;
rep_message VARCHAR2(100);
rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
choice NUMBER ;
BEGIN
-- Estrae il report_id
rep_id := find_report_object(rep_fileobj);
-- Impostazione parametri RUNTIME del report
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_SERVER,rep_server);
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_DESFORMAT,rep_desformat);
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_DESTYPE,rep_destype);
-- SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_DESNAME,rep_desname);
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_FILENAME,rep_filename);
-- Lancia RUN_REPORT_OBJECT con o senza lista parametri
IF ( NOT Id_Null( rep_paramlist ) ) THEN
rep_message := run_report_object( rep_id, rep_paramlist );
ELSE
rep_message := run_report_object( rep_id );
END IF ;
-- Attesa processo asincrono di generazione del report termini
rep_status := 'RUNNING' ;
WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status( rep_message );
END LOOP ;
-- Estrazione JOB_ID
vjob_id := SUBSTR( rep_message, LENGTH( rep_server ) + 2, LENGTH( rep_message ) ) ;
-- Visualizzazione report sul WEB
IF rep_status = 'FINISHED' THEN
web.show_document( '/reports/rwservlet/getjobid' || vjob_id ||
'?server=' || rep_server, '_blank');
ELSE
message ( 'Creazione report fallita. Errore : ' || rep_status );
END IF;
END;
and the parameter passed to the procedure:
run_report_object_proc( 'MG_CAUSALI_MOV', :GLOBAL.rep_path_name||'\MG\mg_causali_mov_excel.RDF',
:GLOBAL.REP_SERVER_NAME, 'SPREADSHEET', '', CACHE, pl_id ) ;
The parameter :GLOBAL.... are correct: the PDF report run correctly.
Where is the problem ?????
The application server control show report SPREADSHEET terminated succesfully and
in the report cache the htm file are present and is correct for Excel (we opened the fil ewith excel).
Thanks in advance
Umberto

Hi dmars,
report runs perfectly if I call it directly from Reports Server, from browser, using reports server URL.
When I call it from the form, it opens Excel file, but it's just empty.
As I understood, there is no way to call excel-compatible report wit run_report_object.
Also, what I learned after browsing internet,- to get nice and neat excel report one has to start with making excel layout first, save it as HTML, open this file in Reports as web report and manually update the code with java script lines.
So, as a matter of fact, SPREADSHEET format was sort of dead-end feature of Reports10G/9i.

KE30 - Form Based Report - TDD not appearing

Dear COPA Experts,
I am facing one strange issue with reporting of Top Down Distribution of Actual Data.
After executing Top Down Distribution of Actual Data, i have checked T-Code : KE30 - Form Based Report but it does not shows me distributed data then i have created one more PA report without Form, and this basic report shows me distributed data.
I have checked T-Code : KE24 and found data is accurately posted via TDD :
But is not showing in Form Based Report :
However, it shows in Basic Report :
Please guide me how to get distributed data on Form Based Report ???
Thanks in Advance for your time !!!
Regards,
Zain Bashir

Hello Zain,
I often face similar problems when using form based reports.
The layout which is part of your report (and where the lines and columns are defined)
includes the selections (e.g. within a column) also.
Example:
User does not find values posted on a cost center within the report.
The FI-document shows the cost center but also an SD-order item.
Result: The CC-posting is just a statistical one.
If the layout does not include the statistical posting the report does not present them.
Therefore: I advise to check the layout and the
column-, line- and general selections.
Hope it helps (and that you evaluate).
With kind regards
Thomas

Changes in the report are not appearing

Hello All,
I have the following command
Run_Product(REPORTS, 'tpd_subst_rep', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL) in the form.
I have changed the report tpd_subst_rep but I am not able to see the changes. Can any one please explain from where the old report is appearing?
I have senn the documentation which is telling that it will look tpd_subst_rep in a default path, but how to see what is the default path?

Hi,
I'm using a later version so I am unsure as to whether the layout etc. will be the same.
I don't know if it helps, but I may have misled you. Do you have the Object Navigator? If I condense all my options, I'm left with Forms, Menus, PL/SQL libraries, Object Libraries, Built-in packages, Database Objects.
Go into 'Forms' (1st option), your module will be listed, open that using the + next to it and in the list that is displayed, one of the options will be 'Reports'. Then open that using + and follow my instructions as before to find the filename path. This will tell you whether it is referencing your .rdf or your .rpt. Presumably it should be .rpt, so it will tell you where that is being saved.
I then opened my .rdf and just used 'Save As' to save it with a .rpt extension, using the address path taken from the Forms property palette of your report. That should then save your changes and update the file in Forms.

Crystal Report Viewer is not appearing after hosting on server

Dear Friends
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
All reports are running fine at my machine.
When I copied published folder into "wwwroot" folder and hosted, all reports are working Good.
Here i have my web application in "Default Web Sites" in IIS.
Then After I added a new website in IIS with a port No. and created a virtual folder and hosted my web application.
The application is running fine, But the problem is Reports are not appearing on Web Page.
I have created an toolbar to export the report. And when I am exporting the report to PDF, It is working well and reports are exported successfully.
I didn't understand why this is happening?
Is this a problem of port no. ?
or
Is this a problem of IIS?
or
Is this a problem of Browser?
or
Is this a problem with CrystalReportViewer?
or
something else?
In fact I have the folder for "C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13". for crystal reports.
Dear All kindly help me in this issue, it is disturbing me since 5 days.
All helps are appreciable.
Thank you.

Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

The crash report always appears whenever I start up my PC and open Firefox, it does not appear when I close Firefox.

Everytime I start up my PC and open Firefox, the crash report will appear. The crash report does not appear subsequently, it only appears when I first open Firefox. I do not seem to have problems when using Firefox otherwise, though I do get new Firefox windows opening and showing me spam.
== Crash ID(s) ==
1d19f5b9-25db-4f39-9948-447622100518

http://crash-stats.mozilla.com/report/index/1d19f5b9-25db-4f39-9948-447622100518
Norton's Intrusion prevention system is causing the crash. You could try updating Norton. If that doesn't work you could try to disable Norton Intrusion prevention
[[Troubleshooting extensions and themes]]
To make sure, you can disable all add-ons in [[Safe Mode]]

Refresh PL/SQL Report Region (not Page) using Select List value

Hi,
I've got a report region based on a 'PL/SQL function body returning a SQL query'which gets generated on selecting a value from a Select list item, The Select List action is 'Redirect and Set value' but this causes the whole page to refresh rather than just the report region. I've tried to refresh the report only using a dynamic action on the Select List item (Action now reset to 'None') but now the report is not appearing on choosing from the List. Can anyone suggest a solution that will allow me to refresh this report without refreshing the page? I am using APEX 4.2.2 and the report syntax is as follows:
DECLARE
v_statement VARCHAR2(500);
BEGIN
SELECT query_text
    INTO v_statement
   FROM sql_queries
   WHERE query_id = :P2_QUERY ;
   RETURN v_statement ;
END ;
where P2_QUERY is Select List Item,
regards,
Kevin.

KevinFitz wrote:
The report region being displayed is conditional on P2_QUERY item being NOT NULL. I assume the region not appearing is because the Action for the Select List Item is set to None and so P2_QUERY is always NULL.
No, the region is not appearing because it is conditional on P2_QUERY being NOT NULL. This means that the report region never exists on the page shown in the browser, so it can't be dynamically refreshed. (Dynamic refresh doesn't evaluate region conditions, and it only re-renders the report content, not the entire region.)
Remove the condition on the report region, check the refresh is working, then reconsider exactly what the requirements here are. If you want the region to appear only when P2_QUERY has a value, and you want it to be refreshed without submitting and re-rendering the page, then the region needs to be hidden rather than conditionally rendered, and shown via a dynamic action when P2_QUERY gets a value.
I tried adding an additional Set Value True Action for the DA event but got an error as listed above,
All irrelevant if Page Items to Submit on the region is used properly.

BitMap Report is not running

There is a bitmap report which is running for all the users but for one specific user it is not running, there is no error which is displayed, while the report is being called from the oracle form (D2K 6i forms and report) , the initialization window (showing client and server activity-- 2 small loop rotates in that particular window) is shown but that window keeps sticking forever, it appears as if the report will run and it's previewer will appear , but in the final the screen gets freeze, the same report is running fine in the other user's cases,
i also ran the report query at the plsql-developer in the back end and the query is also giving result, but the report is not appearing, there are no error also, can you please assist me, if you need any further information , please frankly ask me..............please assist me!!! Thanking You.
With Regards,
Ankit Chandra
00919975119790

nabheetmadan09 wrote:
In SU01D check for the user what are date setting maintained under default tab are they different..?
> Nabheet
@Nabheet: they are using the same user id to replicate the issue... so no need to check SU01d.
@selva,
1. you need to go for remote share and see how he is entering data or ask your client to send screenshot of the screen
2. debugging is possible. put external breakpoint on the particular user id. once he triggers the program the break point will be activated for you to check

Crystal Reports - Charts do not appear on reports in some cases

We have a few reports that include charts on them (created with Crystal 2008 Designer). These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
Wait... This has a curve ball...
The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear!
I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
Thanks for any help - much appreciated.

Nope... Not video corruption... We finally figured it out...
Its the 12_0 runtime. Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
Problem solved.
Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

GL is not appearing in Report S_ALR_87013326

Hello Gous,
One account is not appearing GL is not appearing in Report S_ALR_87013326 for example:
Account group = Other Expenses
Description = Dividend expense
it has accounting document as well and postings.
Thanks in advance
Ahmed

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Report MPs not appearing

Similar Messages

Maybe you are looking for