Report navigation not working properly for the union report

i have a report which is union and i need to navigate to another report(detailed).the filters are not carried out to the detailed report .Please suggest me on how to get the filters ar e correctly applied on detailed report.I have prompted the fileds in the detailed report.

Hi,
Please refer to the below thread.
Re: OBIEE-UNION Request navigate is not working (Parameter value is not passed)
Hope it helps!
Thansk

Similar Messages

Report Navigation not working properly

I have a scenario where in i need to provide navigation on a column so that when clicked it should get the detail report corresponding to the value I click on.
Lets say, I have a static filter abc in the detail report as well as summary report.
When I run the detail report individually on a dashboard page, I am able to see the filter abc in the filter list below the report.
But when I navigate from the summary report, this filter is missing in the filter list as well as in the physical query.
As a result of this the records which have to be filtered on this filter "abc" are not getting filtered.
Can you please help in this.
Thanks,
Swetha

David, I think that will show the user No Results when navigating from the summary report unless he clicks 'abc'.
To the OP, I think you should have 1 filter, unprotected, set to 'abc'. That way when you go to the report directly, it is filtered to 'abc'. But if you navigate to it from the summary report, you it will get filtered to whatever you clicked, 'abc', 'xyz', etc.
If that isn't working, I would check your column formula in the summary report and the target report and make sure they are the same.

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

My IPOD classic headport is not working properly. The sound is going in and out?

My ipod classic headport is not working properly. The sound keeps going in and out. I have tried changing headphones and checking the settings. Does anyone have any ideas?

Do a Hard Reset
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

Skrolu mouse does not work properly in the list of bookmarks

skrolu mouse does not work properly in the list of bookmarks
yer imleri listesinde maus skrolu düzgün çalışmıyor

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You can also try to move (delete) the Firefox plist file.<br />
See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

Scrolling effects in Muse are not working properly with the Chrome browser at the moment.

My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com

We are using Vertical spry menu bar features provided with Dreamweaver CS3.
You are using Spry 1.4.
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4.
When using Dreamweaver CS3 (uses Spry 1.4), it's wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
If after that you still have problems, please come back here.
Ben

HT4061 actually i bought iphone 4s in nov 2012 and now its not working properly as the screen goes black ....i lost the bill..is it possible to get another copy of the bill......

actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....

You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced.

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

Portables and Magic Trackpad: Jumpy or erratic trackpad operation
Might be something from that link that will help.

The paint bucket tool is not working properly. The colors does not change, any suggestion?

The paint bucket tool is not working properly. The colors does not change, any suggestion?

Maybe on the wrong layer.
It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them.

Incompatibility for custom Report is not working properly

Hi Gurus,
Need your help to diagnose the issue here.
The problem here is as under
We have a custom report CP1 which fills a table T1 during the process (table is truncated in the begining of the procedure). This CP1 is set incompatible to itself so that table architecture will work properly.
but the problen here is the next run starts ( 2sec, 5 secs or 10 secs) prior to the actual completion of the last run.
the data is as
CONCURRENT_ REQUEST ACTUAL_START ACTUAL_COMPLETION_
PROGRAM_ID ID                DATE     DATE
138361     3033673     7/3/2012 10:31:46 AM     7/3/2012 10:57:13 AM
138361     3033671     7/3/2012 10:28:47 AM     7/3/2012 10:31:42 AM
138361     3033670     7/3/2012 10:25:22 AM     7/3/2012 10:28:48 AM
138361     3033669     7/2/2012 7:07:21 PM     7/3/2012 10:25:37 AM
138361     3033665     7/2/2012 7:05:10 PM     7/2/2012 7:07:15 PM
here as you see the req 3033670 starts @7/3/2012 10:25:22 AM whereas the req 3033669 ends at 7/3/2012 10:25:37 AM (though we have terminated the 3033669 ) similarly for 3033670 and 3033671.
the following query is giving 1 row
select * from FND_CONCURRENT_PROGRAM_SERIAL
where RUNNING_CONCURRENT_PROGRAM_ID = 138361 is
We have bounced the CM after setting the incompatibility as per the
Setting up Incompatibility Rules for Custom Reports [ID 107224.1] suggested by Hussein on this forum.
This is happening on our prod env. kindly suggest something.
We are on 12.1.1 (r12).
Thanks
-Shivdeep Singh
Edited by: user1054040 on Jul 2, 2012 10:58 PM

Hi Srini,
We have raised a SR with oracle for this it seems to be a bug in 12.1.1 release I will update the same once I got any fix or patch from oracle.
from the intial investigation it seems to be that the imcompatibility wit itself feature is not working as expected.
Also this is the latest case
CONCURRENT_
PROGRAM_ID REQUEST_ID ACTUAL_START_DATE ACTUAL_COMPLETION_DATE COMPLETION_TEXT
150364     3036174     7/3/2012 4:55:03 PM     7/3/2012 4:57:04 PM     Normal completion
150364     3036178     7/3/2012 4:55:57 PM     7/3/2012 4:57:47 PM     Normal completion
150364     3036181     7/3/2012 4:57:27 PM     7/3/2012 4:58:09 PM     Normal completion
the request id 3036178 should have been started after the completion of 3036174 ie after 7/3/2012 4:57:04 PM but it actually starts 7/3/2012 4:55:57 PM
hope this give the better understanding for the scenario here.
Thanks
-Shivdeep Singh
Edited by: user1054040 on Jul 4, 2012 11:36 PM

Filter and navigation not working properly

Hi Gurus,
I have two reports - report1(source) and report2(target) report.
In report1, it shows two columns - Market_ID, Amount_sold
In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
Best Regards,
J

yes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM

Date format is not working properly for Calender value help

Hi Experts,
We have two problems.
1. We want to change the format of date displayed. We want format of dd-MMM-yy. For that we have created one Simple
Type Dictionary Object with Displaying format dd-MMM-yy. It is working
fine for the non editable UI. But once I apply the dictionary type
object as data type for an input field, probem happens. Once the user
choose a date from calender value help the value in the input field is
coming like 01-011-12 not like 01-Jan-12.
The date format is not changing from the calender. But if we set the
display format of the dictionary object to MM-dd-yy or MM/dd/yy or
dd/MM/yy or dd-MM-yy the format conversion from calender to input field
is happening properly.
The only problem once we put MMM in place of MM for the input field
where user is selecting from a calender value help.
2. We want to restrict users from entering the value manually for date input field. The user
should be able only to enter value by selecting from calender value
help.
Please give suitable solution for these problems
Thanks
Shankha

Hi Sankha,
Please refer the links below:
http://scn.sap.com/thread/1659463
http://scn.sap.com/thread/1533443
Regards,
Manoj

Report navigation not working properly for the union report

Similar Messages

Maybe you are looking for