Report needed for Red (High) Incidents only

Hi,
My boss would like me to be able to run a report that includes red (high) incidents only. I've looked through all of the possible reports and can't find anything remotely close to his request. Any help would be appreciated.
Thanks,
Kerry

Kerry;
You should be able to create a query to gather only red severity events, and then make this query part of a report.
In the query, you will want to click the "ANY" under the 'Events' column. In the resulting pane, you will want to set the "Restrict to Severity" drop-down to "Red". From there you can further tune the query to restrict it to specific reporting devices, events, etc. This query should return only red severity events. From there, you can make this query a report by clicking the "Save As Report" button.
Scott

Similar Messages

Report needed for storage costs in WM

Hi All,
I need a report for the storage costs for utilising the warehouse by plants. Cost of space utilised per m3 will be provided in selection screen. For each material the volume should taken from material master. Warehouse will be utilised by three plants and report needed to calculate the space occupied by the materials in warehouse per plant per month. I am not able to find the logic to calculate average space utilised(as day to day there will putaways,transfer postings and picking).All stocks to be taken into consideration.Let me know how to proceed.
Regards,
Manik

Dear Experts,
Cud u plz throw some light on this...
Regards,
Manik

Java(TM) 2 SDK needed for Red Hat Enterprise 4

Hello List members,
I am installing open-xchange on my Red Hat Enterprise 4 box but getting error "no acceptable java compiler found - please install at least the Java(TM) 2 SDK."
JRE is installed in my system but even after a lot of research I am unable to find Java(TM) 2 SDK . Can anyone of you tell me where to download Java(TM) 2 SDK for Red Hat Enterprise 4. Its not in the SUN site as far as I know, I could be wrong.
Please help me.
Regards,
Vishal

I installed rhe4 and i have installed a lot of jsdk1.4.2-1.50 and later no any error and not collapsed java system but it has using GNOME consol avoid running system well you will changed GTK SYS.

Customer Master Report needed for jurisdiction, tax code, and district

I am trying to pull a customer master report and need to include the following fields:
Name (NAME1)
Account (KUNNR)
Jurisdiction ( TAXJURCODE)
Tax Code (TAXKD)
District, which is County for US addresses (CITY2)
I haven't seen a report with CITY2 and have tried S_ALR_87012180 or opening KNA1, KNVI, etc.
Any ideas?
Thanks,
Michelle

No there is not such report or transaction.
You may look at tables KNA1 + ADRC.
In table KNA1 there are fields ORT01, ORT02, COUNC and CITYC that could help
Otherwise you must link KNA1 and ADRC with field KNA1-ADRNR = ADRC-ADDRNUMBER
Sorry
BR
Alain

Report needed for infotype changes

hi all
i need a standard report that provides employee numbers for which master data changed in a particular infotype.
plz suggest
regards
niki

Hi nikki,
First in Spro : PM->PA->Tools->Revision-> Set up change doc: Determine log of which infotypes you wanna see.
Then execute report S_AHR_61016380.
Regards,
Dilek
Edited by: Dilek Ersoz on Aug 6, 2008 10:01 AM

Is Z report needed for FBCJ Balance?

Hi,
There are 5 cash journals and client needs the balance for all cash journals along with Responsible Person, Balance, Debit and Credit.
In FBCJ I couldnt found, is there any report available with above requirement??
Anybody can suggest please.
Raju

Hi,
Are these five cash journals assigned to same GL or different GL??
Using that you can consolidate all the five cash journals..
Cheers
Raghu

What is needed for JAVA custom development only?

We have a pilot Netweaver 04 server setup with JDI configured under scenario 2+. We will only use the landscape for custom non-R/3 related JAVA apps. Will I need a DEV WAS JAVA JDI instance, QA WAS JAVA JDI instance, and PRD WAS JAVA JDI Instance? If not the would I just need a DEV JDI instance, then a vanilla QA WAS JAVA instance and PRD WAS JAVA instance. I am trying to understand how system landscape compare to a traditional R/3.

Hi Steve,
if you are using NWDI, please refer to the enviroment recommendations there. Actually, compared to R/3 your DEV environment is what you run either locally or in a group organization. Your DEV environment is the server you use as a central testing instance and that should obviously be another server then your productive servers.
Basically this means that NWDI usually does a transport to the dev system and if you want to deploy to productive, you just would initiate such from NWDI.
Regards,
Benny

Report needed for overall view of update compliancy

I've been asked to provide a custom report to give an overall status for the update compliancy for the servers in place.
Have been fiddling about in sql mgmt studio and kind of understand where to get the information from, but am missing something. so I was hoping someone could point me in the right direction
I realize that this kind of report might take some querying time, but this is what the customer wants: instead of him going to the builtin report compliance 7 (category sw updates - compliance A) where he has to select a collection AND a baseline AND a compliance
status, he wants to obtain a list of all server systems being compliant to some server baselines and a list of all server systems being non-compliant to some server baselines
currently the sqlcode i Have to show the compliant servers, is:
SELECT
     v_R_System.Name0
AS Servername,
v_GS_OPERATING_SYSTEM.Caption0
AS OS,
v_ConfigurationItems.CI_ID,
v_AuthListInfo.Title,
v_StateNames.TopicType,
                      v_StateNames
.StateID,
v_StateNames.StateName
FROM
         v_ConfigurationItems
INNER
JOIN
                      v_AuthListInfo
ON v_ConfigurationItems.CI_ID
= v_AuthListInfo.CI_ID
CROSS
JOIN
                      v_R_System
INNER
JOIN
                      v_GS_OPERATING_SYSTEM
ON v_R_System.ResourceID
= v_GS_OPERATING_SYSTEM.ResourceID
CROSS
JOIN
                      v_StateNames
WHERE
(v_R_System.Client0
= 1)
AND(v_R_System.Operating_System_Name_and0
LIKE
'%server%')
AND
(v_AuthListInfo.Title
LIKE
'%server%')
AND(v_StateNames.TopicType
= 300)
AND(v_StateNames.StateID
=
'1')
ORDER
BY Servername
BUT if I now change the stateid to 2 in the query I get the same amount of rows back (being 134 servers with an sccm client times 4 server update groups)
so my problem is: how and when do i make the correct join here ?

I was thinking that it might be better to use the assignmentstate views, and I quickly came up with this alternative:
SELECT
     v_R_System.Name0
AS ServerName,
v_CIAssignment.AssignmentName
as
'Deployment Name',
v_StateNames.StateName
FROM
         v_AssignmentState_Combined
INNER
JOIN
                      v_R_System
ON v_AssignmentState_Combined.ResourceID
= v_R_System.ResourceID
INNER
JOIN
                      v_FullCollectionMembership
ON v_R_System.ResourceID
= v_FullCollectionMembership.ResourceID
INNER
JOIN
                      v_CIAssignment
ON v_AssignmentState_Combined.AssignmentID
= v_CIAssignment.AssignmentID
INNER
JOIN
                      v_StateNames
ON v_AssignmentState_Combined.StateID
= v_StateNames.StateID
WHERE
(v_StateNames.TopicType
= 300)
AND(v_StateNames.StateID
= 1
OR
                      v_StateNames
.StateID
= 2)
AND(v_FullCollectionMembership.CollectionID
=
N'D01003FE')
ORDER
BY servername
at first glance this produces what I want, let me check with the customer.
you guys agree with that or not?

Report needed for checking where pers. nr. is used in SAP

Hello,
I am currently searching if there is a report available which is checking where in SAP a Pers. nr. is used. e.g. partner in an open order or responsible of a costcenter or appraiser in an appraisel, open workflow document etc. This is needed to confirm that all the tasks of the emplloyee has been transferred to another employee before the leave action is made.
With kind regards,
Ronald van Eeuwen

Hi,
There are more than 9000 programs and classes where field PERNR is used.
You have to be more specific with your question.
You can see all programs where PERNR is used by starting transaction SE11, enter data type PERNR, display and then CtrlShftF3.
Cheers

Help needed for Graphical mapping.Tag only once produces

Hello experts,
I have a problem in my graphical mapping.This is the example:
from each segment A in IDOC has to be made Tag A or Tag B in output XML.
Segment A has a field USER_STATUS and if it is X than Tag B has to be made otherwise Tag A.
Segment A is 0..9999999. occurence
Tag A 0..unbounded
Tag B 0..unbounded.
I made a mapping
mapping for Tag A:
USER_STATUS -> mapwith default(empty)->length->EqualsA (with Constant =0)-> createif->Tag A
for Tag B as following:
USER_STATUS -> mapwith default(empty)->EqualsS (with Constant =X)-> createif->Tag B
The problem is that in output XML, I have only one Tag A or B (depending on field USER_STATUS in first occurence of the segment) while in inbound IDOC 5 segments are with different value of the field: USER_STATUS.
Does anyone idea to solve this problem!
Thank you very much for your effort.
King regards,
Danijela Zivanovic

HI,
CAn you try this way,
Use Maping Node UseOneAsMany for Tag B
and pass 3 inputs as
Constant[]----
>
USER_STATUS -> mapwith default(empty)->EqualsS (with Constant =X)----
>
USER_STATUS -> mapwith default(empty)->EqualsS (with Constant =X)----
>
Same way try for Tag A also.
Thanks
Swarup

I need a refund for storage charges I bought and did not need for iCloud!

I need a refund for storage charges I bought and did not need for iCloud!

You only have 15 days to cancel and get a refund.
In the UK click on this link:
HT4874 iCloud Storage Upgrade refund

Vendor ageing report data for all doc type needed(urgent)

hello everyone
once again i need ur help guys.
in the vendor ageing report i am getting data for only one document type and not of other.
ex- see i have two documents type-
1.KD 2. EJ
so i am getting data for document type KD only.
so how to get the data of document type EJ along with KD.
below is my code .
so tell what modifications i have to made .
*& Report Z_VENDOR AGEING                                                    *
*& in this repoet I am calculating the vendor ageing
    which is depending on formula
    AGEING = Current Date(or any date entered by user) Bline Date(BSIK-ZFBDT)                                                                 *
REPORT z_vendor NO STANDARD PAGE HEADING
                  LINE-SIZE 200
                  LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
       bukrs LIKE bsik-bukrs,
       saknr LIKE bsik-saknr,
       bldat LIKE bsik-bldat,
       wrbtr LIKE bsik-wrbtr,
       lifnr LIKE bsik-lifnr,
       zfbdt like bsik-zfbdt,
       zbd1t like bsik-zbd1t,
       ageing type i,
       END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
                 s_saknr FOR bsik-saknr,
                 s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt zbd1t
       FROM bsik
       INTO TABLE t_out
       WHERE saknr IN s_saknr
       AND bukrs IN s_bukrs
       AND lifnr IN s_lifnr.
Loop at t_out.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
    i_datum_bis                   = p_date1
    i_datum_von                   = t_out-zfbdt
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
IMPORTING
   E_TAGE                        = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Modify t_out.
Clear t_out.
Endloop.
LOOP AT T_OUT.
IF T_OUT-SHKZG = H.
T_OUT-WRBTR = T_OUT-WRBTR * -1.
T_OUT-WRBTR = T_OUT-DMBTR * -1.
ENDIF.
DATA: TOTAL(16) TYPE P DECIMALS 2.
TOTAL = TOTAL + T_OUT-DMBTR.
Endloop.
LOOP AT t_out.
WRITE : / t_out-saknr,
            t_out-lifnr,
            t_out-wrbtr,
            t_out-zfbdt,
            T_OUT-DMBTR,
            t_out-ageing.
AT LAST.
WRITE:/ TOTAL.
CLEAR TOTAL.
ENDAT.
ENDLOOP.
Message was edited by: sanjeev singh

Sanjeev,
Can you tell what is document type EJ representing...Secondly, if you check couple of documents of EJ type and check if data is available as per you WHERE clause filters.
Regards
Anurag

What settings do I need for high quality web video?

I've created a video via animoto.com for my website. The video resolution they recommend for web is 432 x 240 @ 15 fps. I used this and it's not as crystal clear as I'd like. Still looks pixelated a bit and I'd like a higher def version. So I downloaded the hi res version (864 x 480 @ 24 fps). This looks great but takes forever to load due to buffering. Then the video stops every few seconds. I understand this res is not meant for web.
What is the resolution I need for best quality & fast loading? I've seen great videos on the web before that loaded very quickly. This is what I'm looking for. I have Quicktime Pro for Mac and can pretty much save in any formats & resolutions. So what's recommended?
Thanks!

Hi
There are some important things.
• Set down burn speed to x1. In iDVD08 You can do this in preferences.
• Use high quality media. I only use Verbatim
• Use right type of DVDs. I only use DVD-R (Single Layer)
• Best quality - I use Pro-encoding Quality.
• IMPORTANT: Secure a minimum of 25Gb free space on Your internal (start-up) hard disk
• Use a CD/DVD cleaning disk from time to time
• Don't burn more than three DVD at a time then let Your DVD-burner rest in 15 minutes to cool down.
Good Luck
Yours Bengt W

Reasons for Introducing database functions for Discoverer Reporting Needs

Hi All,
I would like to know the criteria other organizations have used in creating custom database functions specifically for Discoverer reporting needs. It seems good and appropriate to identify these reasons in order that they have a sufficiently good reason (e.g. in presenting this to a change management board).
Here is a quick swipe:
-query explain plan improvements
-take away the complexity of having the end user deal with complex calculations
-consistency of a value (e.g. a complex amortization calculation)
-an attribute is used from a dependent table with a minimum cardinality of zero
Can anyone list other good reasons in terms of Discoverer reporting?
Thanks,
Patrick
Edited by: Patrick Bacon on Jul 15, 2009 10:30 AM

Hi Patrick
In addition to the reasons you have given the reasons for having functions anyway apply just as equally to Discoverer as they do to other applications.
Typically the main reasons why I would use a function are:
a) due to the complexity of the code, or
b) to evaluate something which an end user either could not do or does not have access to.
For example if a user needs to have aggregations from multiple tables side by side in a report, typically from tables which have no joins between them, I write functions to go get the individual results.
One specific function that I use a lot is one that calculates the number of working days between any given two days. Some of my HR customers use such a function to calculate the number of sick days for an employee when obviously only working days should count. Doing this in a normal Discoverer calculation would be very hard. Retail customers might use this for calculating the number of days it took to ship and item.
There are other reasons why I use functions but these are the typical ones.
Best wishes
Michael

Is crystal reports correct for me / my needs?

i'm wondering if crystal reports is correct for my needs. i don't mind investing the time / money to figure this out, but i really can't waste any time so i thought i'd ask the question first
is crystal reports correct for my needs?
some detail of my needs:
1. the report would be similar to an IKEA catalog: lots of pictures, different layouts (so different reports merged into one). reports need to "look bitchin'". needs to be "printer ready" in regards to size, crop lines, page numbers, etc. my main concern here is basically "how limiting is crystal reports in data placement on the page"?
2. the data would come from a relatively large db (MS SQL, Oracle, mySQL, and maybe others). size: about 40 million record main table, with supporting tables (i.e., relational). the db is not encrypted and is accessible if you have the main password.
3. i would like to send the reports to something like PDF, but also to excel and text file.
4. i would like to offer the reports to my clients as part of my own software package, so hopefully this consists of an .exe file only (no updates required, etc).
i would prefer to talk to a live person about this, or ideally see a quick demo of what is possible with crystal reports. is this possible?

Hello,
Pictures can be a problem, they take up a lot of report space. I assume your pictures are in the database? Large reports get very large quickly with pictures ( ole object ).
What you could do is download the trial version of CR 2008 and the sample reports:
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
I also suggest you call Sales, they can send you links for demo's etc.
https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip
https://smpdl.sap-ag.de/~sapidp/012002523100006010272008E/feature_smpl.zip
This may be of help also:
https://smpdl.sap-ag.de/~sapidp/012002523100006010012008E/demo_smpl.zip
Thank you
Don

Report needed for Red (High) Incidents only

Similar Messages

Maybe you are looking for