Report needed to identify shipments having volume less than 1cbm in a month

Hi,
I need to know which tcode we can use to get a report showing the total shipments in a month having volume of each less than 1 cbm.
Thanks & Regards,
Ameya Khanwalkar.

Solved using report download tcode VT12 and then doing some analysis in excel

Similar Messages

Gzzz. if i would have know this jetpack uses so much data,, even if i am not on anything and shut it off when i don't use it, i wouldn't have bought this,, already used 1.5gb of data and only on twice for less than 2 hours this month,, whats up with that,

jet pack sucks.... used already 1.5 gb data and only used less than 2 hrs time,, and don't download anything. even buying tn gb, sounds like thats a rip off, i been with verizon many years and wish i would have checked this before i purchased this jetpack. sounds suspicious to me, guess verizon wnats to loose all its jet pack users,, no help, no stopping the usge, may be worth paying to stop the contract at this point, this is rediculous.. anybody gotten any help withis resolving this issue,,

I Am still baffled why anyone would think 15 GBS a month is enough to run a computer.
it will certainly not run multiple devices. Watching one hour of video will add up to 1-3 GBS of data alone.
try a data meter. Keep Tabs On How Much Data Your PC Downloads and Uploads
How much data do you use on your computer a month?
Our 3 person household with Cable internet guzzles close to 300 GBS a month at home and have a 30 GB cellular data pool. (Which we don't make much of a dent in)

Report needed on Identified training type.

Dear Experts,
While configuring the appraisal template using phap_catalog, I have incorporated the badi u2018Add Business Event Typesu2019 under free enhancement node for a criteria group. This is to enable supervisor to select training type from training catalog appearing in the appraisal form/document for the appraise during In-Process phase.
My question : Is it possible to take out a report which will display the training types identified for appraises in their their appraisal document?
I was trying for standard PHAP_SEARCH transaction, but this is not fulfilling the requirement.
Please suggest.
Thanks in advance.

Hi Prakash,
It can be done, but there might be a few issues. Firstly when the user adds Event Types to the appraisal form it would be getting saved as a new criteria group or a criteria group in reference to the config you have set up.
So even if you pull up the additional criterion that gets stored in the appraisal, you will have to map the Event Type (from the course catalogue) with the title of the criteria group stored.
Hope this make sense, else please do let me know.
Regards,
Priya.

Need advice:8800 Arte Spoilt in less than 1 week

Can any one pls advice me what should i do as my new 8800 Arte mic not working 2 day after i bought it on 23rd Dec 2007.As the service center in singapore disagreed to change me a set but only change my PCB leaving me having a S$1888 phone with different imei number on my phone with my box and warranty card. Thanks in advance if your advice is useful.

You are entitled to have the fone swapped after such a short period of time, or at the very least a fully recon one.
Speak to the manager of the outlet you purchased from, and get ready to go legal if required.
Keep calm and dont raise your voice etc as this will only hinder you.
If you get no joy then contact their Head Office Customer Service Department, and CEO to further your issue.
Contact Nokia on the 'contact us' link on this site to ask their advice although they wont be able to get involved in any way with your dispute.
I have the Nokia 8600 Luna and every now and then the mic seems to go a little "tinny" when the fone rings or when I use the external speakers. The quality of the callers voice is sound tho. I basically just remove the battery which soft boots it back to normal. Thisa only happens every month or so.
Message Edited by bandofbrothers on 02-Jan-2008 08:44 AM
Message Edited by bandofbrothers on 02-Jan-2008 08:47 AM
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Logic board can you fix it you'r self or do it for less than $200

help in i need the logic board fixed for less than $200

I've had the logic board in my MBP 3,1 replaced twice, both covered by AppleCare. The first one was a failure which was video related, but they swore it wasn't the NVidia failure. That was almost a year ago at the end of December 2009.
The most recent logic board replacement was due to a repair tech error. I had my LCD replaced because of backlight issues and the Apple Care was within 4-5 weeks of expiring (at the end of July/early August 2010). The tech accidentally replaced the 1920x1200 LCD with a 1680x1050 one, and then they had to order the correct one as a replacement, so I had to use it with the wrong LCD. When the correct one came in, the inverter on the logic board had adjusted itself to the lower power of the 1680x1050 LCD and wouldn't power the higher res LCD properly, so they had to replace the logic board again to get it working right. ranted, that last one would have been an Apple expense had it not still been under Apple Care, since it was their error that caused the problem.
Having stated that, if your MBP only has a 1680x1050 display (or lower) you might be able to get a working logic board from someone who had the same issue as I did in August. Of course, according to the documentation I got from Apple on my repairs, the cost of the replacement logic board for my system was about $1200, so it is a bit above the $200 limit you are setting, and based on the cost I was informed, I doubt you will find a working one in your price range...

Message no. RM109 The quantity at RP is less than the quantity at next RP

Hello everyone,
I am getting an error in regards to a reporting point. I tried going into MF4R to reset the reporting points and when I do I get the following message:
The quantity at RP 0220 is less than the quantity at the next RP
Message no. RM109
Diagnosis
The reporting point structure is inconsistent as at reporting point 0220, the backflush quantity is less than at the subsequent reporting point. In a consistent backflush, the quantity at a subsequent reporting point (work in process) always less than or equal to the quantity at the previous reporting point.
Procedure
Check the reporting point stocks using transaction MF26. Post any missing quantities at previous reporting points.
I have went into MF26 and "Yes" reporting point 0220 is less than the following reporting point. My question is... how do I fix this? Any help will be greatly appreciated.

Good morning Raj,
Here is what MF26 is showing:
614830             0033 0001 W3300
0010                84 PC
0020                38 PC
0030                38 PC
0040                38 PC
0050                38 PC
0060                84 PC
0070                84 PC
0080                84 PC
0090                84 PC
0100                38 PC
0110                84 PC
0130                38 PC
0140                38 PC
0150                38 PC
0155                84 PC
0160                38 PC
0165                84 PC
0170                84 PC
0180                38 PC
0185                84 PC
0190                84 PC
0200                38 PC
0210                38 PC
0220                38 PC
0225                84 PC
0230                84 PC
0240                84 PC
0245                84 PC
0246                84 PC
0250                84 PC
0260                84 PC
0270                84 PC
0280                84 PC
0290                84 PC
As you can see RP 0220 shows only 38 pcs RP 0225 and up shows 84 pcs. Using MFBF I backflushed 46 pcs to RP 0220 to make it equal to the 84 pcs. But, when I went back into MF26 RP 0220 still shows 38 pcs.
Thank you for your help!
Rhonda

Greater Than Less Than

Dear all,
I am Using oracle 10g R2 database on windows.
I have a doubt that,
If I have a 'Date' datatype column suppose a and want to (select Less than sysdate and greater than Sysdate-31(One Month).
e.i.
select a,b,c from T where a Less Than Sysdate-31(One month.);How can i do this.
Thanks,
Chanchal Wankhade.

Shinegar wrote:
I had not considered the effect on an index with TRUNC. Thank you for pointing that out.
TRUNC doesn't actually remove time as you can see below
SELECT TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH:MM:SS AM') "Today's Date and Time" from DUAL;
Today's Date and Time
01/19/2012 12:01:00 AMLet's say sysdate = Jan 19, 2012 11:00:00 AM
As shown above, trunc(sysdate) = Jan 19, 2012 12:01:00 AM
So, trunc(sysdate) -1 = Jan 18, 2012 12:01:00 AM
Removing the trunc from column a
select a,b,c
from T
where a between trunc(sysdate)-1 and trunc(sysdate);will also remove all data that is greater than Jan 19, 2012, 12:01:00 AM so you would only see data from one day -- Jan 18th.
Adding the trunc to column a returns all the data from Jan 18th and 19th.
It is my experience that users will ask for a date range, but then will ask for just one day. If Column a is not truncated, then no rows would be returned when between trunc(sysdate) and trunc(sysdate).
Most programmers will not use trunc(sysdate) in the where clause, but would use a variable with value assigned of sysdate or trunc(sysdate) as it provides more flexibility.
If you do not want to use trunc on column a, then the where clause should be BETWEEN trunc(sysdate) - 31 AND sysdate.
Edited by: Shinegar on Jan 19, 2012 12:40 PMThe trunc function does not remove the time portion, but it does set it to midnight. Or at least i would if you used the correct format mask in your TO_CHAR. The mask for minutes is MI not MM.
SQL> SELECT TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH:MI:SS AM') am_pm,
2 TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH24:MI:SS') mil_time
3 from dual;
AM_PM MIL_TIME
01/19/2012 12:00:00 AM 01/19/2012 00:00:00John

Less than 450 minutes?

I have the talk/text/data plan with unlimited all three to other vzw custs and unlimited web with 450 minutes to non vzw numbers. On average, I use less than 100 non-vzw minutes. Is there a way to get a plan with less than the 450 minutes, to lower my bill? I definitely want to keep unlimited data as long as I can and unlimited text because I use these a lot but I feel I'm paying for 450 minutes of non Verizon minutes and using a fraction of that. And I looked online and didn't see any plans with less minutes. If anyone has any info on how or if I can lower this at all I'd appreciate it, thank you.

>>
They could offer a plan of less than 450 minutes, but it may not come with free VZW to VZW calls.
Much like those who have a family plan with 1400 minutes. They get 10 numbers to call for free. Many say they never use their 1400 minutes, can they have a less minute plan, BUT they still want those free numbers.
With out the freebies, you would most likely use your minutes.
<<
I would prefer it. Because I am a low caller and even if there aren't significant freebies my count would still be less than 450 minutes per month. I am in fact wasting a good per centage of minutes every month.

Sccm 2007 need to pull report of advertisements whose success rate is less then 80%

sccm 2007 need to pull report of all advertisements whose success rate is less then 80%

Why not using default reports and filtering out the one less than 80%?
107: Status of a specific advertisement
108: All system resource advertisements with status
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Reasons for Introducing database functions for Discoverer Reporting Needs

Hi All,
I would like to know the criteria other organizations have used in creating custom database functions specifically for Discoverer reporting needs. It seems good and appropriate to identify these reasons in order that they have a sufficiently good reason (e.g. in presenting this to a change management board).
Here is a quick swipe:
-query explain plan improvements
-take away the complexity of having the end user deal with complex calculations
-consistency of a value (e.g. a complex amortization calculation)
-an attribute is used from a dependent table with a minimum cardinality of zero
Can anyone list other good reasons in terms of Discoverer reporting?
Thanks,
Patrick
Edited by: Patrick Bacon on Jul 15, 2009 10:30 AM

Hi Patrick
In addition to the reasons you have given the reasons for having functions anyway apply just as equally to Discoverer as they do to other applications.
Typically the main reasons why I would use a function are:
a) due to the complexity of the code, or
b) to evaluate something which an end user either could not do or does not have access to.
For example if a user needs to have aggregations from multiple tables side by side in a report, typically from tables which have no joins between them, I write functions to go get the individual results.
One specific function that I use a lot is one that calculates the number of working days between any given two days. Some of my HR customers use such a function to calculate the number of sick days for an employee when obviously only working days should count. Doing this in a normal Discoverer calculation would be very hard. Retail customers might use this for calculating the number of days it took to ship and item.
There are other reasons why I use functions but these are the typical ones.
Best wishes
Michael

When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Understanding report need backup recovery window ..

Hello,
I have a big database which backed up within several days at night time. The retention policy is "recovery window of 3 days". I've tried to analyze the results of
report need backup;But I noticed than this command return just the list of datafiles having latest backup older than 3 days. I've tried to read again the docs:
>
Reports data files for which there are not sufficient backups to satisfy a recovery window-based retention policy for the specified number of days, that is, data files without sufficient backups for point-in-time recovery to any point back to the time SYSDATE - integer.
>
Please correct me if I'm wrong, but I consider that the ability to make recover to any point in time within 3 days require the backup taken earlier than 3 days ago and archivelogs from the time when backup was taken to the recover PIT. Im I right? If so then how I should interprete the results of report need backup ? I can't find the detailed explanations of this in the docs :(
Thanks in advance,
Constantine

You are correct in your appreciations.
This report is about the need of backups, without considering archivelog backups.
It does not mean that listed files are in an unrecoverable situation.
Regards.

Report needed for storage costs in WM

Hi All,
I need a report for the storage costs for utilising the warehouse by plants. Cost of space utilised per m3 will be provided in selection screen. For each material the volume should taken from material master. Warehouse will be utilised by three plants and report needed to calculate the space occupied by the materials in warehouse per plant per month. I am not able to find the logic to calculate average space utilised(as day to day there will putaways,transfer postings and picking).All stocks to be taken into consideration.Let me know how to proceed.
Regards,
Manik

Dear Experts,
Cud u plz throw some light on this...
Regards,
Manik

Is anyone having volume issues with the new Iphone 4S?

Is anyone having volume issues with the new Iphone 4S?

Yes, the volume on my iPhone 4s will max out without me touching any button or setting. When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons. It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.
Anyone else seen this?

SQL query needed to identify cancelled invoice where distribution lines

SQL query needed to identify cancelled invoice where distribution lines Debit is not equal Credit line item in particular
Is there a way from back end FROM ap_invoice_distributions_all where we can find for the cancelled invoice where distribution lines Debit is not equal Credit line item
Regards,
Prakash Ranjan

Hello Prakash
Can you please see if this query helps you?
SELECT i.invoice_id, i.invoice_amount, nvl(sum(d.amount),0)
FROM ap_invoice_distributions_all d, ap_invoices_all i
WHERE i.org_id = <you org_id>
AND i.invoice_id = d.invoice_id
AND d.line_type_lookup_code not in ('PREPAY')
AND i.cancelled_date IS NOT NULL
GROUP BY i.invoice_id, i.invoice_amount
HAVING (i.invoice_amount <> nvl(sum(d.amount),0))
ORDER BY i.invoice_id asc
Octavio

Report needed to identify shipments having volume less than 1cbm in a month

Similar Messages

Maybe you are looking for