Report node in KE5A

Hello all,
we created a report in GRR3. Now we want to assign it as a node in KE5A.
How can we do that?
Thanks,
Anne

I thought it was PCA1.
Make sure you are in change mode.
To add a transaction code or program, you need to define it in the hierarchy.
Go to Edit in the Menu.

Similar Messages

  • How to delete report node name ?

    Hi All,
    We migrated our peopleSoft development database to production , now I want to delete all report node name which were configured for development , is it possible ??, if yes please help.
    Thanks.

    No option in front end, run a delete statement against the table on Oracle level :
    delete from ps_cdm_dist_node;Nicolas.

  • Report node is not posting

    Hi All,
    for last 4 days onwards im facing report node not posting in my PROD
    Can you please help me on this
    Im geeting bellow errorr is PT->Process scheduler->Process Monitor->Process list
    1)Java exception thrown: java.la ng.SecurityException: illegal URL redirect
    2)HTTP Status Code is: 902 (63,7 2)
    3)HTTP transfer error
    4)PSUNX failed to post files to the report repository. Server scheduled to try again on 2011-10-19-13.41.50.999989. See log
    In process scheduler log file showing below errors :
    Number of new entries to process: 1
    PSDSTSRV.22891 (73) [10/19/11 01:03:54 PostReport](3) 1. Process Instance: 222812/Report Id: 276354/Descr: Process Scheduler System Purge
    PSDSTSRV.22891 (73) [10/19/11 01:03:54 PostReport](3) from directory: /apps/psoft/hrms9/appserv/prcs/PSUAT/log_output/AE_PRCSYSPURGE_222812
    PSDSTSRV.22891 (73) [10/19/11 01:03:55 PostReport](1) (JNIUTIL): Java exception thrown: java.lang.SecurityException: illegal URL redirect
    PSDSTSRV.22891 (73) [10/19/11 01:03:55 PostReport](3) HTTP transfer error.
    PSDSTSRV.22891 (73) [10/19/11 01:03:55 PostReport](3) Post Report Elapsed Time: 1.9200
    In webserv log showing below error :
    ####<Oct 19, 2011 1:10:46 PM IST> <Notice> <Stdout> <prabhav> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319010046166> <000000> <SchedulerTransfer, authentication failed>
    In appserv log im geeting below error
    PSAPPSRV.15742 (10) [10/19/11 14:36:04 GetCertificate](3) PeopleSoft Token authentication succeeded: ICI_PS@prabhav
    PSAPPSRV.15742 (10) [10/19/11 14:36:04 GetCertificate](1) (NET.502): @prabhav is an Invalid User ID, or you typed the wrong password. User ID and Password are required and case-sensitive. Make sure you're typing in the correct upper and lower case.
    PSAPPSRV.15742 (10) [10/19/11 14:36:04 GetCertificate](1) (NET.346): Failed to execute GetCertificate request
    Please help me on this
    Thanks&Regards
    SHiva
    Edited by: 892205 on Oct 19, 2011 2:37 AM

    What version of peopletools is it. is their a IB setup in place for the above system. can you ping the local node on the system. did u mark the local node on the single sign on tab as local node.
    are their any psswds changed for the IB user on the system.
    Thanks

  • Report node and reports repository

    what is the difference between report node and reports repository. I know that Process schedular picks the report from report repository in order to show in process monitor. Does report node and reports repository are same??

    After a report runs to success in runstatusYeah, but the files are send to the report repository even if it is not successful terminated (run status is not sucess). If the files are not sent to the report repository, then the problem doesn't come from the process itself, but from the definition, space availibity...
    When a report has been posted sucessfully (transfered from the process scheduler report repository - on the other hands the log_output dir, to the report repository defined into the report node), the status of the distribution status is Posted.
    The run status and distribution status are independant eachother.
    Nicolas.

  • Run report from forms - Cannot change file name in report node

    I am running a report (9i) from forms (9i) and I changed the name of the report in the filename field in the report node (in object navigator).
    I noticed that I get the error FRM-41214 on the RUN_REPORT_OBJECT line when I run the form, if I've changed the filename from what it originally was. e.g. It was originally rep44.rdf and I changed it to rep55.rdf, but I get this error unless I keep the rep44.rdf filename. Why? Is there somewhere else I should change this filename?

    To view the reports queue open this URL:
    http://<server>:<port>/reports/rwservlet/showjobs?server=<repserver>
    Also, try running the report stand alone, not from Forms.
    http://<server>:<port>/reports/rwservlet?server=<repserver>&report=rep55.rdf&userid=<un>/<pw>@<db>&destype=cache&desformat=PDF

  • When the reports will be posted to the report node

    Hi ,
    I am wondering that when the reports will be posted to the report node. Whether the reports are posted to the node once the creation of the single report finishes or the post action will be performed until the finish of the process?
    Anyone has this experience ?
    Thanks in advance!

    on a process like PSJob, each individual process is treated as a separate instance. every instance gets posted separately.
    the overall distribution status gets updated once the complete job finishes.
    that is same with single processes or reports. the overall process status can get updated at the end, but the posting of report to the report node will be done as soon as the instance run completes. it does not wait to transfer the complete reports at the end of the job.
    Thanks

  • Report Node Setup

    Hello,
    I have installed PS HRMS 8.9 and PeopleTools 8.46 on Win NT. I did setup process schedular and able to run processes (SQRs, COBOLs) successfully. But I couldn't able to view output in process monitor. The process are running succes but distribution status showing N/A. My report node definition was setup like Ftp/Xcopy
    Distribution Node Details:
    URL: C:\psreoprts
    Home Directory: C:\psreports
    Operating System : NT/Win2000
    FTP Address: C:\psreports
    FTP ID: PS
    Network Path: C:\psreports
    Please let me know how can I view report outputs in process monitor.

    I think ur report node definition is wrong. The url should be http://<machine name>:<port number>/psreports/<PeopleSoft site name> and ur FTP address should be ur machine name.
    Is ur process scheduler and web server on the same machine?

  • Problems with report nodes

    when i post the reports,i get the posting message as success but the distribution node status says not posted?
    can someone help me?

    I have done the following and the problem has been resolved
    It seems that your Default local node did not have the authentication option set. You have to set the Authentication option under Node definitions. Go to
    PeopleTools >> Integration Broker > >Node Definitions and set the
    Authentication Option from 'None' to 'Password'. After this restart the
    application server. Also recheck the report node URL and URI host name
    specified on the report node definition page. Apart from this also setup the
    single signon. Go to PeopleTools->Security-> Security Objects -> Single
    Signon and add an expiration time value and for the Message node name insert
    your default local node. After saving all this restart your app
    server, process scheduler and web server.

  • Report node - not posted

    Hi,
    Reports are not getting posted and found the below message on the message log. Any help on this is highly appreciated.
    Error getting report repository file statistics for process instance: 1812 (63,104)
    PSUNX failed to post files to the report repository.  Server scheduled to try again on 2013-09-25-13.47.49.112355.  See log /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/transfer_1630.log
    ===========
    pshcmadm@fcas111:/facs/proj/peoplesoft/PT8.52/appserv/prcs/HRSND1/log_output/_PSDSTSRVLOG $ view transfer_1630.log
    about to submit ftp -vin /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/ftp_1630.txt
    Connected to fcws110.fcs.facs.com.
    220 "WARNING! THIS IS A PRIVATE COMPUTER SYSTEM. USAGE MAY BE MONITORED AND UNAUTHORIZED ACCESS OR USE MAY RESULT IN CRIMINAL OR CIVIL PROSECUTION. Except for some privacy rights granted by applicable law, by signing on to the system you acknowledge: You do not have any expectation of privacy in your use of the system. You are familiar with, understand, accept, and will comply with the provisions of Company Directive."
    331 Please specify the password.
    230 Login successful.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    550 Create directory operation failed.
    250 Directory successfully changed.
    257 "/facs/.p_peoplesoft/peoplesoft/PT8.52/psreports/HRCS/20130925/1616" created
    250 Directory successfully changed.
    200 Switching to ASCII mode.
    local: /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/AE_AEMINITEST_1812/AE_AEMINITEST_1812.stdout remote: AE_AEMINITEST_1812.stdout
    229 Entering Extended Passive Mode (|||43865|)
    150 Ok to send data.
    226 File receive OK.
    303 bytes sent in 00:00 (415.00 KB/s)
    221 Goodbye.
    File Transfer Successful
    ============

    We are getting the not posted issue, only when we enable the custom sign on peoplecode.
    Thanks
    Soundappan

  • The structure of the profit center report in new GL

    Hello,
    I must finish a query for the customer this week. This query must base on a sap standard report for the new GL.
    Because our ECC 6.0 system hasn't the Enhancement Package 3 (contains the necessary new features) yet, so I can't see this standard report which should be displayed under the path:
    SAP Menu --> Accounting --> Financial Accounting --> General Ledger --> Information System --> General Ledger Reports (New) --> Profit Center Reports --> S_E38_98000088 - Profit Center Group: Plan/Actual/Variance
    Can somebody tell me the structure of this report, if you can see this report in your system?
    - Which key figure has been used in the report?
    - What are in the rows and columns?
    - Which characteristics are available to navigation?
    - Which variables and General data selections are there?
    Hope somebody can help me. Thanks a lot!
    Best regards,
    Yuanyuan

    Hi,
    Then my suggesion is you copy the form & report structure  of most suitable report (which you have downloaded through FGIQ) .Modify the form according to your reporting requirement. Create new report by coping standard report & assign this newly created form to this report.This will serve your purpose.
    Please do not make any changes to standard report.Copy it & then do the changes.
    Transaction code for the same is FGI0 or  FGI1 or FGI2 or 3 or 4 or 5 or FGI6.
    Second suggestion is in SPRO in GL information system (infact in each information system ) you will find drilldown report node in that import report transaction e.g. FSIQ .Import all reports you might get your required report.
    Regards,
    Abhijit

  • Report open POs as of a date in past

    Is there a report that will show open PO amount as of a date in the past?  I need to show open amounts as of 31dec2006.
    Thanks in advance,
    Den

    Hi Den,
    Please check the "List Display" & "Reporting" nodes under the Logistics -> MM -> Purchasing -> Purchase Order node within SAP menu.
    It shows a lot of transaction for analysis and reporting purchase order information and even analysis of archived documents.
    You can have a look at ME80 and ME81.
    Hope it helps.
    Rgds,
    Aditya

  • PeopleSoft Report Manager does not show up reports

    Folks,
    Hello. I am using Peopletools 8.49.
    The Report Manager has 4 tabs: List, Explorer, Administration, Archives
    After I run reports using Process Scheduler, nothing shows up under the above 4 tabs and this message comes up:"Invalide or missing parameter in request" under List tab.
    I have followed "Process Scheduler Documentation" - Chapter 5 "Using Report Manager" to configure it, but it's not working out.
    The following solution is for PeopleTools 8.44:
    http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/report-manager-nothing-showing-under-list-1011644
    Can any folks tell me how to solve this problem in PeopleTools 8.49 ?

    Folks,
    Hello Thanks a lot for replying.
    1) The default local node (PT_LOCAL) has been set a password that is login user password.
    2) I think I define the Report node correctly under "PeopleTools>ProcessScheduler>ReportNodes" as follows:
    Http Information is selected.
    URL: http://127.0.0.1/psp/ps/psreports
    (psp is Domain name, ps is Site name while configure Webserver. psreports is a folder in C:\)
    URI Host: http://127.0.0.1
    URI Port: 80
    URI Source: don't need this since Scheduler and Webserver are in the same machine.
    Logi ID: PSADMIN
    Password:PSADMIN
    Under Intergration Broker, I have done the follows:
    1) Gateway, Domain, Pub/Sub Server are running.
    2) Service Operations: PSRF_FOLDER_CREATE, PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE AND PSRF_REPORT_DELETE are set "active" and "Asynchronous One Way".
    3) Login User PSADMIN are granted Roles "Report Super User" and "Report Dist Administrator".
    But Report Manager still cannot display Reports by this point.
    The only problem is that under "PeopleTools>IB>Configuration>Service Configuration>UDDI Configuration", when Ping the Inquiry URL and Publish URL, I got such an error message: "External System Contact error."
    Inquiry URL: http://PTNTAS28/UDDI/INQUIRY
    Publish URL: HTTP://PTNTAS28/UDDI/PUBLISHING
    I think the "External System Contact error" cause Report Manager cannot display Reports. This problem is caused by "Gateway" or "UDDI Server" not running correctly.
    Thus, I have 3 questions:
    First, Do I need to change 4 Service Operations from "Asynchronous One-way" to "Request/Response" ? What is Receiver node for routings ?
    Second, do I need to set up UDDI Server and configure it ?
    Third,, where to set up single signon for the default local node (PT_LOCAL) ?

  • Having Issue with Service Monitor Report when using Oracle DB

    Hi,
    I set up Oracle XE to store monitoring and message data for Service Monitor. I configured the Database Connection in Policy Studio, and deployed the configuration. When starting the Service Monitor, I got "There are no reporting nodes configured." error.
    Here is the detailed message:
    INFO 27/Jan/2012:13:13:54.155 [ed46fa00] thread set netsvc threadpool drained
    INFO 27/Jan/2012:13:13:55.074 [ed46fa00] rolling file logs/ConfigurationManagementAuditTrail.xml stopped
    INFO 27/Jan/2012:13:13:55.078 [ed46fa00] Shutting down Policy Director Manager
    INFO 27/Jan/2012:13:13:55.093 [ed46fa00] rolling file trace/ServiceMonitor.trc stopped
    [oracle@EDCPR16P0 bin]$ ./oegservicemonitor
    INFO 27/Jan/2012:13:13:59.896 [911baa00] Attempting to connect to entity store at federated:file:////u01/app/oracle/oeg11g/oegservicemonitor/conf/fed/configs.xml
    INFO 27/Jan/2012:13:14:03.014 [911baa00] Realtime monitoring disabled
    INFO 27/Jan/2012:13:14:03.016 [911baa00] Storing metrics in database disabled
    INFO 27/Jan/2012:13:14:03.781 [911baa00] cert store configured
    INFO 27/Jan/2012:13:14:03.785 [911baa00] keypairs configured
    INFO 27/Jan/2012:13:14:03.791 [911baa00] Initializing server
    INFO 27/Jan/2012:13:14:04.423 [911baa00] Attempting to connect to repConfig entity store at file:/u01/app/oracle/oeg11g/oegservicemonitor/conf/repConfig.xml
    INFO 27/Jan/2012:13:14:04.455 [911baa00] There are no reporting nodes configured.
    INFO 27/Jan/2012:13:14:04.456 [911baa00] Initializing report file format transformer
    INFO 27/Jan/2012:13:14:13.005 [911baa00] Server initialized
    INFO 27/Jan/2012:13:14:13.206 [911baa00] TCP interface
    INFO 27/Jan/2012:13:14:13.206 [911baa00] checking invariants for interface *:8040
    INFO 27/Jan/2012:13:14:13.206 [911baa00] listen on address 0.0.0.0/8040
    It looks like the repConfig.xml file needs to be updated. If so, what elements? Anything else i am missing?

    You need to add a Gateway node the service monitor.
    To do this browse to http://HOST:8040/
    Using the default port, you can connect to the Service Monitor interface in a browser, where HOST points to the IP address or hostname of the machine on which Service Monitor is installed.
    Right mouse click and add the Gateway node.

  • Error calling report FRM-41213 unable to connect to Report Server

    Hi,
    I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
    I installed it in both Windows 2000 SP4 and Windows XP SP2.
    I would like to call a Report using a button inside Oracle Form.
    I create my own Report Server, using : rwserver server=repsrv
    A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
    In Form (inside a button -> WHEN-BUTTON-PRESSED) :
    1. Using RUN_REPORT_OBJECT()
       rep_id := find_report_object('REPORT10');
         if not id_null(rep_id) then
           v_rep := run_report_object(rep_id);
         else
              message('Null');
       end if;
       a. If I did not specify the name of the Report Server in Reports node of Form's property object
    (I leave it blank)
    The following error appear :
    FRM-41211: Integration error, SSL failure running another product
    b. If I specify the name of the Report Server : repsrv
    The following error appear :
    FRM-41213: Unable to connect to Reports Server repsrv
    2. Using WEB.SHOW_DOCUMENT()
    a. If did not I specify the server name in the parameter
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
    REP-51002: Bind to Reports Server rep_<computer_name> failed
    b. If I specify the server name in the parameter --> server='repsrv'
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
    REP-51002: Bind to Reports Server repsrv failed
    In Report :
    If I try to navigate manually to :
    1. http://localhost:8889/reports/rwservlet using web browser.
    It showed OracleAS Report Services - Servlet Command Help page.
    2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
    The following error occured
    REP-51002: Bind to Reports Server rep_<computer_name> failed
    3. Finally,
    http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
    The following error occured
    REP-51002: Bind to Reports Server repsrv failed
    4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
    If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
    If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
    5. I have tried to use rwrun in command line.
    rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
    The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
    Question :
    1. What supposed to be done?
    The Report server is ready, but the web browser seems unable to connect to Report Server.
    2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
    Any help would be grateful.
    Many thanks,
    Buntoro

    Hi,
    Problem solved.
    I got the solution from another post.
    Re: REP-51002: Bind to Reports Server rep failed
    Here are the step I did.
    Note : Please make backup for the following file : rwnetwork.conf
    - In file rwnetwork.conf, remove or commented the following
    <multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
    - And then uncommented
    <namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
    - replace the
    %NAMING_HOST% with your computer name or specify an IP address
    %NAMING_PORT% with 14021
    It should look like this :
    <namingService name="Cos" host="blahblah" port="14021"/>
    - I did not change the : name="Cos", since I do not understand what does it for
    - Save you changes.
    - Start the OC4J.
    - Find the location of : namingservice.bat (on Windows platform)
    - execute in the command line : namingservice.bat 14021
    - finally start the report in the web browser
    Note:
    To shutdown the namingservice, use : namingservice.bat 14021 shutdown
    Regards.
    Buntoro

  • How to call a report from a menu ?

    I am converting 6i client/server forms to 9i.
    I have a menu that has an option on it to run a report for each menu item selected using RUN_PRODUCT.
    9i is making this obsolete, so how can I call a report from a menu (not a form) now then ?
    In a form it is fine cos I just use the Report Object - a menu does not have this facility.
    Thanks in advance.

    Hi,
    so here is how this should be done:
    1. Create a Reports node in the Forms module that uses the menu (you don't have to create one Reports Object for each report that you want to run)
    2. From the menu, before calling Run_Report_Object() use Set_Report_Object_Property() to set the phsical file name of the Reports that should be executed. This is kind of best practice and does not have a performance hit.
    There is a bug filed against Forms to extend the menu files with a reports Object node. This could require a change to teh file structure which is why we looking for Forms 10i to implement this. (If it turns out that we can have it without recompiling the menu modules then it may go into a patch set - however this seems unlikely from my point of view)
    Fran

Maybe you are looking for