Report Not Appearing Dashboard

Hi,
I have added a report to the dashboard.
Report has Title,Table and Filter View.
I have page prompts for that report.
The report is appearing properly when it meets the prompt condition.
When there is no data matching the prompt condition.It should show no results and filter view. But nothing is coming on the dashboard.*
I can able to see dashboard links but nothing else is coming.
I am not getting any error or warning.
Is there any solution for this?
Thanks,
Satheesh

Hi,
In Compound Layout we have the option ->Other Views -> No Results View click on that and Edit the No Result view and Type what you want in Text portion.
Thanks,
Balaa...

Similar Messages

Create prompt inisde the report not the dashboard promt

Hi All,
I had this rek today saying that i need to create a prompt inisde the report not the dashboard prompt.can anybody help me how to create the prompt inisde the report.

Hi,
In Compound Layout we have the option ->Other Views -> No Results View click on that and Edit the No Result view and Type what you want in Text portion.
Thanks,
Balaa...

Enabled Homepage Reports Not Appearing in "Available Sections" picklist

Good afternoon,
I have created numerous custom homepage reports and have enabled them to be added to homepage layouts. However, when building a new homepage layout, not all of the reports that have been enabled are visible in the "Available Sections" picklist. I cannot figure out why because all of the reports are listed in the "My Homepage Custom Reports" section. Is there a limit to the number of reports that will appear in the "Available Sections" picklist?
I'm stumped on this one. Has anyone encountered this problem? If so, is there a solution or a possible reason this is happening?
Thanks in advance!
Ryan

when you set up the reports did you select home page in the drop down or did some of them get set a detail page reports? that would be my only suggestion.
cheers
alex

Web based Crystal Report not appearing

Hi
Hope this hasn't been asked before, had a look in the forum but couldn't find it specifically.
I am developing a web application with one CR in it.
VS 2010 + CR for VS installed on development machine.
The development environment is all fine, works a treat. The problems started when I tried shipping to our staging environment, and also a test area on our live server.
Our live web server is running Windows Server 2008 Web edition R2 with dotnet V4 x86 runtime installed.
After overcoming 'Type Initializer' error, 'log4net.dll' error and 'LoadReport' error on the live server, the live server now just displays a blank page.
When I had this problem on the staging server I found that this was caused by the 'aspnet_client\system_web\4_0_30319\crystalreportviewers13' folder not existing or in the right place. It works on the staging server when I'm browsing using http://localhost etc.
Things I have done to get the report working on the live server:
1. Install CR Runtime 32bit V13
2. Set security settings on C:\Windows\Temp to allow web user (actually set to 'Everyone' until it's all working properly) read/write access
3. Moved folder 'aspnet_client\system_web\4_0_30319\crystalreportviewers13' to the application folder and the www root folder (have tried in various places also)
I have to say that the report is displayed when I'm on the live web server and browse using http://localhost etc., and I can repeat the problem by moving the crystalreportviewers13 folder out of where it should be.
After getting all this done over the past 2 DAYS I believe that the problem lies with the location of the 'crystalreportviewers13' folder. Although it could be something else.
Any help in this matter would be greatly appreciated.
Cheers
Julian

OK, apologies. posted in haste!
It seems that the report is working, it's just the browser I was viewing it from simply doesn't display it. No idea why yet, but not too worried as all other machines I try it on, it works.
A little annoyed however at the amount of time I've wasted trying to get this working. Is it documented anywhere for instance that C:\Windows\Temp needs special privileges set up to make a web crystal report work?
Anyway, please ignore this, and the last post!
Cheers
Julian

SCCM: Reports not appearing in console

The Reports node in the console, which is installed on my local machine, isn't expanding to show all the ConfigMgr reports. The reports node does expand on the console on the server (just a single primary site server with SQL and SSRS). I can reproduce the
issue using an account with full administrative access.
Any ideas on how the reports node to show reports on the console on my machine?

You can also try running ReportViewer.exe (<ConfigMgrInstallDir>\tools\ConsoleSetup again) again. Plus check the certificates.
Torsten Meringer | http://www.mssccmfaq.de

Broadcast Reports not appearing

Hi,
While trying to access Broadcast Reports from Portal to BI, we are getting error as below
500 Connection Timed out
Component : ICM
Module : icxxthr_mt.c
Detail : Connection to partner timed out after 1800s
ICM parameter values are like this,
icm/keep_alive_timeout (sec.) = 1800
icm/conn_timeout (msec.) = 5000
Kindly suggest.
Thanks,
Upesh

HI..
Ask ur basis people to the basic settings..
also in SCOT AND SOST t-codes.
Broadcasting
For an overview, see the E-Learning Maps on BI in SAP NetWeaver 2004s, http://service.sap.com (SMP login required). Information broadcasting is documented to a great detail in standard BI documentation.
If you integrate broadcasting with the SAP NetWeaver Portal, you have to implement the required settings for BI in the IMG (transaction SPRO) under "SAP Transaction SPRO/SAP Reference IMG ->SAP Customizing Implementation Guide ->SAP NetWeaver ->Business Intelligence ->Reporting-Relevant Settings ->Web-Based Settings ->Integration into Portal". The Customizing step, "Overview: Integration into Portal" contains a detailed description of the steps and settings required in BI and Portal
sridath
Edited by: sridath on Aug 21, 2009 2:17 PM

View BIP report with parameter in Dashboard, but the parameter not appear

OBIEE 10.3.4.1 on Redhat 5.2.
I have a BIP report with 3 parameters which work fine in BIP. Now I embedded it in BI Dashboard, but not see the parameter menu when view in Dashboard. Is this the feature, or I missed something.
Thanks.

On the BI publisher Report Properties window, for Display Mode, select 'Link'. Then you should see the Report Object appear as a link, save and on the dashboard page when you click that link, the BI publisher report will show with the parameters..
Thanks,
Bipuser
Edited by: BIPuser on Jun 3, 2011 9:36 AM

Results are not appearing in report

Hi All,
When user ran the report, it gives below error.
A general error has occured[nQSError:1207]Unexpected socket read timeout: connection terminated by network, e.g. by the firewall.
But when ran the query in the backend it fetching the results and in criteria it contains SET OPERATOR with UNION,but not appearing the results in report.
Regards,
Niranjan

Hi, Thanks for your response...
When i ran the report with diffrent/default combination then i am getting the results.
In my criteria SET operator is used for combining of similar request and we have diffrent filter conditions and dashboard prompts also.
Connection from back end is fine,because iam able to get other report results also.
Regards,
Akkapeddi

Crystal Reports - Charts do not appear on reports in some cases

We have a few reports that include charts on them (created with Crystal 2008 Designer). These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
Wait... This has a curve ball...
The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear!
I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
Thanks for any help - much appreciated.

Nope... Not video corruption... We finally figured it out...
Its the 12_0 runtime. Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
Problem solved.
Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

GL is not appearing in Report S_ALR_87013326

Hello Gous,
One account is not appearing GL is not appearing in Report S_ALR_87013326 for example:
Account group = Other Expenses
Description = Dividend expense
it has accounting document as well and postings.
Thanks in advance
Ahmed

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Vendor ref. no. not appearing in print preview of vendor aging report

Dear all,
Vendor reference number is not appearing in print preview of vendor ageing report,we have
customized template AGE3 collection report,we have taken print outs before a month,vendor
reference number get printed in report,now it is not appearing
What could be problem ?
Any one faces this issue ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 41.
Latest patch upgrade to PL:46 will solve the issue ?
Jeyakanthan

hi all,
Thru a workaround i brought up vendor reference number in print preview/print,
Applied formatted search in journal remarks of ap invoice thru query
SELECT $[OPCH.NumAtCard]
,this will populate vendor ref. no in journal remarks
which can be displayed in details in aging report.
Is there any solution other than above to bring vendor reference number in print ?
Jeyakanthan

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

Crystal Report Viewer is not appearing after hosting on server

Dear Friends
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
All reports are running fine at my machine.
When I copied published folder into "wwwroot" folder and hosted, all reports are working Good.
Here i have my web application in "Default Web Sites" in IIS.
Then After I added a new website in IIS with a port No. and created a virtual folder and hosted my web application.
The application is running fine, But the problem is Reports are not appearing on Web Page.
I have created an toolbar to export the report. And when I am exporting the report to PDF, It is working well and reports are exported successfully.
I didn't understand why this is happening?
Is this a problem of port no. ?
or
Is this a problem of IIS?
or
Is this a problem of Browser?
or
Is this a problem with CrystalReportViewer?
or
something else?
In fact I have the folder for "C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13". for crystal reports.
Dear All kindly help me in this issue, it is disturbing me since 5 days.
All helps are appreciable.
Thank you.

Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Report Not Appearing Dashboard

Similar Messages

Maybe you are looking for