Report not found in REPORTS_PATH
I am trying to run a report from a form, but the report is not being found, even though the path where the report is located is in the REPORTS_PATH in both the default.env file and the registry. The only way the report runs is if I include the path in the report object filename.
Does anyone have any idea why it would not be able to find the report file?
This had happen to me before. The reason that it was causing me a problem was the value in the reqistry was too large. So I removed all the default entries like the ones for the demo reports. This was a long time ago, so it might not be the issue you are having.
Tom
Similar Messages
-
Include/Report not found "/1BCDWB/IQ000000000027DAT"
Hello!
I have tranported an ABAP-program from DEV to the QAS-system and have difficulty, even If I check the program in QAS-system.
The error/warning I get is:
Include/Report not found "/1BCDWB/IQ000000000027DAT"
The question: how can i transport the include from DEV to the QAS? Or is there some other posibilities to solve the problem?
Thank you!
regards
ThomHello Heinemann,
Generally BASIS people will transport requests from one server to another server. They will use transaction STMS for this purpose. We first transport the request from development to testing/Quality system and thereafter from Quality to Production System. Releasing a transport request is done with the help of SE09/SE10 transactions..
Check this link about Transport Management System
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
Reward If Helpful.
Regards
Sasidhar Reddy Matli. -
Report not found in File Repository Server
I am looking for some guidance as to what to try next with this issue.
We had ran into some issues with the central management service and had to reinstall crystal. During the setup we are connecting to our mysql database and the reports and folder structure is restored in the Central Management Console but when the reports are previewed or scheduled to run they fail I receive the following message:
"File generated name.rpt not found on File Repository Server.
Unable to retrieve Object.
File generated name.rpt not found on File Repository Server."
Has anyone came across this issue and if they could provide a solution would be greatly appreciated.
Thanks.there are very many forum posts and SAp knowledge articles on this topic/error message. Please do use search before posting.
The repository that stores all your objects in Crystal is dual one part is int he DB - called CMS DB - it stores all te metadata, and second part is FRS (Input /Output servers) - they store actual physical reports and instances on the disc.
My guess is that during re-install you either wiped out original FRS location or after re-install didn't point your FRS to the right place.
If its second - all you need to do is point FRS to the right directory and you'll get your reports back.
If it's first - you just lost all your reports/universes etc.... and will need to restore from backup. -
Hi,
when trying to run report I am getting this error
REP-110: File accountsmain.rdf cannot be opened.
REP-1070: An error occurred while opening or saving a document.
REP-0110: File accountsmain.rdf cannot be opened.
any help
Thanks,
KKHi!
Either you can edit your REPORTS_PATH environment variable and
put your reports path there, or you edit the rep_pcname.conf
in the developer_home/reports/conf directory.
Open the file with a text editor of your coice.
search for the line
<!--property name="sourceDir" value="your reports source directory"/--> and change it to
<property name="sourceDir" value="x:\your_reports_path"/> change x:\your_reports_path with your reports path, save the file and restart your oc4j instance.
Regards -
Error: "file not found" when try to display image on report
Dear All
I have a problem when running my report.
My Table emp_info Stores all data about employees in addition to the employee image path.
I made a report that display employee information including its photo.
I run my report passing the parameter p_emp_id to display the desired emploree information.
I made a field on the report to display the employee image
and i set its property READ FROM FILE = YES and FILE FORMAT=IMAGE
But the following error occurs
"File '\\iai3\iaigc\ALL\emp_images\51.JPG' not found. "
I'm sure that the path is correct
But i do not know why the report stops and can not read the image path.
My platform is:
Oracle application server installed on linux
and oracle report builder installed on widows for developmentDear aweiden
thanks for replaying
I belive you are right . I think the problem is in the path.
But there is something that i did not mentioned to you. I work on two different servers.
1- "iai2" : Linux server which contains oracle application server.
2- "iai3" Windows 2003 server which contained oracle database 10g and the folder "aigc\ALL\emp_images" which contains Employees images
I think that the problem is that Linux server can not understand the path "\\iai3\iaigc\ALL\emp_images\51.JPG".
Do you have any idea how the path should be changed so that Linux can recognizes it.
Thanks in advance -
Crystal report problem in add-on(CrystalDecessions.Crystal Engine not found
HI All,
i am having a problem with crystal report not opening.
what is the solution to run the add-on it i ssaying that Crytsal Engine 10.5.3700.0 is not found in assenmly or specified path.
how can i resolve this error. do i need to add some file while creating the add-on.If so what i have to add.
Please help me.
Thanks & Regards
omprakashhi,
Check this thead
Problem with Crystal reports deisgner
Jeyakanthan -
Hi all. I have recently installed MSSQL Server 2008, and was not able to access the URL when I clicked on it. It gave me a 404.
When I installed 2012, I tried the same thing and it also throws me a 404 error. How should I go about solving this? What are the log files that you may need to help me solve this?
At the same time, I have also tried to uninstall my 2008, but am always stuck at not being able to remove Client Connectivity Tools and some other components. Please let me know what log files you need and I will be happy to provide them. Thanks!
The following is the log for the uninstallation.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052368
Exit facility code: 1212
Exit error code: 1648
Exit message: Failed: see details below
Start time: 2014-04-11 09:40:30
End time: 2014-04-11 09:41:37
Requested action: Uninstall
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: ADC-PC
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: Singapore
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 Management Tools - Basic
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Management Tools - Complete
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Client Tools Connectivity
Enterprise Edition 10.50.1617.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation edition: EVAL
User Input Settings:
ACTION: Uninstall
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
ENU: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: CONN,SSMS,ADV_SSMS,CE_TOOLS,BROWSER,WRITER
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTANCEID: <empty>
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
Detailed results:
Feature: SQL Writer
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Browser
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Compact Edition Tools
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\SystemConfigurationCheck_Report.htmStrange, but finally the procedure below did solve my problem.
# Go to Control Panel > Add or Remove Programs and look for '''Anti Phishing Domain Advisor'''.
# If you click on ''Click here for support information'' you'll see it is a Panda program.
# Uninstall '''Anti Phishing Domain Advisor''' program...
# This did solve my problem
See also [https://support.mozilla.com/en-US/questions/811399#answer-205531 Can't open mail. Get this message: 404 Not Found nginx/0.6.32] -
User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
Any ideas?
TIA!!I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
From terminal I run:
df
Which returns something like
/dev/disk0s2 1951845952 224463456 1726870496 12% /
devfs 360 360 0 100% /dev
map -hosts 0 0 0 100% /net
map auto_home 0 0 0 100% /home
//[email protected]/website 204360384 38067872 166292512 19% /Volumes/website
//[email protected]/website 204360384 38067872 166292512 19% /Volumes/website-1
map -fstab 0 0 0 100% /Network/Servers
Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
It's the same share, same data, but is being referenced by different names, so does not seem accessible.
BUT
I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
Tedious. -
Error in alv report (fieldcatlog is not found)
Hai Genious
i am a new of the sap-abap, i have a one problem in my alv report, now i am using the reuse_alv_ fieldcatlog_merge,
i declared with my internal table with type,
my error is :- fieldcatlog not found
for example
types: begin of ty_mara,
matnr type matnr,
meins type meins,
ersda type ersda,
ernam type ernam,
end of ty_mara.
data: wa_mara type ty_mara,
it_mara like table of wa_mara.
select matnr meins ersda ernam from mara into table it_mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'IT_MARA'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call function 'reuse_alv_list_display'Hi,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'IT_MARA'
I_STRUCTURE_NAME = 'TY_MARA'-->give it
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
also use...
CHANGING
ct_fieldcat = i_fieldtab
data :i_fieldtab TYPE slis_t_fieldcat_alv,
s_fieldtab_body TYPE slis_fieldcat_alv.
fill i_fieldtab like this...
CASE s_fieldtab_body-fieldname.
WHEN 'OA_NO'.
s_fieldtab_body-seltext_l = 'Order Accep. No.'.
MODIFY i_fieldtab FROM s_fieldtab_body INDEX sy-tabix.
CLEAR s_fieldtab_body.
WHEN 'KTEXT'.
s_fieldtab_body-seltext_l = 'Ramco Order No.'.
MODIFY i_fieldtab FROM s_fieldtab_body INDEX sy-tabix.
CLEAR s_fieldtab_body.
and so on -
"Field Catalog not found" ...problem in ALV reporting !!
Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
lgpla LIKE mseg-lgpla,
bwart LIKE mseg-bwart,
menge LIKE mseg-menge,
dmbtr LIKE mseg-dmbtr,
budat LIKE mkpf-budat,
txjcd LIKE zmigo_extend-txjcd,
END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
so_budat FOR mkpf-budat,
so_werks FOR mseg-werks,
so_lgpla FOR mseg-lgpla,
so_bwart FOR mseg-bwart,
so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
amenge admbtr bbudat ctxjcd INTO TABLE
migo_data
FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
zmigo_extend AS c ON amblnr = cmblnr
WHERE a~matnr IN so_matnr
AND b~budat IN so_budat
AND a~werks IN so_werks
AND a~lgpla IN so_lgpla
AND a~bwart IN so_bwart
AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'migo_data'
i_inclname = sy-cprog
CHANGING
ct_fieldcat = it_cat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'MIGO report with Tax Jurisdiction Code'
is_layout = wa_lay
it_fieldcat = it_cat
TABLES
t_outtab = migo_data
EXCEPTIONS
program_error = 1
OTHERS = 2.Give 'migo_data' in uppercase as ''MIGO_DATA'.
-
Hi,
I try to generate a report using a template. In my template I use some cross-reference to refer to one bookmark. For exemple in the first page I created a bookmark for my name and in the header I created a cross-reference refer to my name. The problems is when I run my VI the bookmark actualise perfectly but the cross-reference refer to the bookmark can't actualise with the same value and generates an error : "Error! Reference source not found".
Can somebody help me please!
Nki
Solved!
Go to Solution.
Attachments:
01.jpg 72 KBHi,
When i create the word template, the bookmaks and the cross-reference referred to the bookmark update correctely. The problem is when I try to change the bookmark using "report generation from template vi" the bookmark change but not the cross-reference and the error generated is "Error! Reference source not found".
I make coople reasherch and i think they have no solution for this because : "if the text in a heading referred to in a cross-reference is revised, the cross-reference to the heading may no longer work" (http://office.microsoft.com/en-us/word-help/troubleshoot-cross-references-HP005189368.aspx).
To "resolved" this problem I create an other bookmark in the template who have the same value white the principle bookmark.
I use Labview 2011 and Micosoft office 2010. -
I first tried downloading Safari when the 5.0 update came out last year. When I choose the app in the dock, I get the blue top bar (Safari, File, etc) but nothing else loads. I uninstalled the app and tried again several times, but no success. For over a year now I've used Firefox as a result. Today I thought I'd try again, but same results. When I choose "new window" in the file menu, I get a small gray window with my bookmarks on top, then in a few seconds, the app quits unexpectedly and the report an error screen appears. I've unchecked all the languages in the information area for the app, cleared all history, cookies, and cache. Still the extensions tab in the preferences area has "LOCALIZED STRING NOT FOUND" in 4 places. It won't show what that means when I click the "?". Will I ever be able to use Safari again?
Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
-> Profile in use
* [http://kb.mozillazine.org/Profile_in_use]
Check and tell if its working. -
Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll
Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
ArunPlease try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta -
User Was Not Found when trying to run SSRS report!
I'm trying to run SSRS report (Custom Reports) for Dynamics CRM 2011. However, when I try to run the report from the Reporting Manager it errors out "User Was Not Found"!
Here's the complete error log:'
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DSMain'. (rsErrorExecutingCommand)
Microsoft.Crm.CrmException: An unexpected error occurred. System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]:
User Was Not Found <OrganizationServiceFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/xrm/2011/Contracts"> <ErrorCode>-2147220969</ErrorCode> <ErrorDetails xmlns:d2p1="http://schemas.datacontract.org/2004/07/System.Collections.Generic">
<KeyValuePairOfstringanyType> <d2p1:key>CallStack</d2p1:key> <d2p1:value xmlns:d4p1="http://www.w3.org/2001/XMLSchema" i:type="d4p1:string"> at Microsoft.Crm.ServerLocatorService.GetCrmUserId(Guid organizationId,
String authenticationInfo) at Microsoft.Crm.Sandbox.SandboxHostSids.IsCallerAllowed(SandboxSdkContext requestContext, String& expectedSidSddlForm, String& callerSidSddlForm) at Microsoft.Crm.Sandbox.SandboxSdkListener.AuthenticateCaller(SandboxCallInfo
callInfo, SandboxSdkContext requestContext, String operation) at Microsoft.Crm.Sandbox.SandboxSdkListener.Execute(SandboxCallInfo callInfo, SandboxSdkContext requestContext, String operation, Byte[] serializedRequest)</d2p1:value> </KeyValuePairOfstringanyType>
</ErrorDetails> <Message>User Was Not Found</Message> <Timestamp>2014-05-09T21:37:02.5487525Z</Timestamp> <InnerFault i:nil="true" /> <TraceText i:nil="true" /> </OrganizationServiceFault>
An unexpected error occurred.
User Was Not FoundHello,
Can you preview the report in Report Builder or Report Designer?
Based on the error message, the issue may related to a invalid user account for the report data source credentials.Please verify the user account is valid and has sufficient permission to access CRM data source.
You can refer to the following blog to troubleshooting CRM custom report rsProcessingAborted error:
http://blog.simpletrees.com/2013/04/mscrm-and-dreaded-rsprocessingaborted.html
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Crystal report for Enterprise show latest instance shows URL not found error
hi everyone,
we recently upgraded our BO4.1 platform from SP2 to SP5.
after the upgrade we are getting error while view the latest instance of Crystal report in BI launchpad, this error occurs only for Crystal report and that only when we scheduled in pdf format.
anybody faced this issue before, any idea or resolution?
Thanks in advance.
Regards,
Ganeshwhen I click on view latest instance, i am getting below error.
The requested URL /BOE/portal/1503182223/CrystalReports/filename/CREnt_BICS_STS_Check.pdf was not found on this server
but when see the path, I could see the path till /BOE/portal/1503182223/CrystalReports/
is it remaining path, like the “file name” part generated at runtime?
could you please support me, do we need changes required in tomcat?
Regards,
Ganesh
Maybe you are looking for
-
I can't update podcasts after updating to 11.2
Widows 7 64bit. When I click the update button, things start normally for about 2 seconds then stalls. After about 3 minutes, I get a Windows message saying iTunes has stopped responding and closes iTunes. If I have task manager open while I try to u
-
Exchange Server 2010 with SP3 Management Tools
Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installat
-
Printing with Lion and Adobe Reader 9.4.5
Today, after installing Lion Wed, I needed to print a pdf document with mixed landscape and portrait pages. With AR 9.4.5 all the landscape pages were rendered in portrait, occupying about half of each sheet. With Preview, all pages printed as they s
-
Embedded document viewer in Flash
Hi, We are looking at provided an embedded document viewer within a website and also within a Flash based applicaiton. The document viewer would need to display Office documents and PDF documents. We think Adobe has Flash Paper which fulfills some
-
Spreading user data across multiple HD's?
I hope this is the right forum for this. I'm on a Mac Pro 1,1 and recently installed a few extra hard drives to optimize performance for video editing (accoring to recommendations over at another big software company's support docs -- this is not abo