Report not generated because of the given error(Logon Denied)

hi,
While generating the report following error is shown.
ORA-01017: invalid username/password; logon denied
All the roles and privileges are properly mapped..
kindly help.

Sorry for the delay Chris, had a time finding somewhere to put the file…
It's here:
216.8.172.241/TempSaveError.zip
…but only until my dynamic IP changes.
I don't know it will give you much, I tried closing the file and then opening it again and everything had gone back to normal. Then I couldn't reproduce the error again. I do think it had something to do with that mask.
The layer is a overlay layer filled with neutral grey that has had noise added to it at 70% opacity with a mask, and the mask was feathered at 1.1 px.

Similar Messages

TS3212 I keep getting this error message "The folder path 'Program Files' contains an invalid character.' when upgrading itunes to Itunes 10. I could not uninstall because of the same error message. What needs to done?

Can not download and install Itunes 10 - Get this message "The folder path 'Program Files' contain an invalid character. I tried to uninstall my old Itune through Control Panel but get the same message. What do I need to do?

Perhaps try the following user tip with that one:
"not a valid short file name" and "invalid character" install errors

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Error Message: Can not generate mask for the LMB peripherals

I've added a bunch of perhipherals to my microblaze project and used the Generate Addresses button. I get the below error messges when I try to generate a net list. ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:ilmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:ilmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl
ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:dlmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:dlmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl I understand its complaining about the mask values, but I'm not exactly sure why. Here is the address map it shows:Address Map for Processor microblaze_0
(0000000000-0x00003fff) dlmb_cntlr    dlmb
(0000000000-0x00003fff) ilmb_cntlr    ilmb
(0x81800000-0x8180ffff) xps_intc_0    mb_plb
(0x81c00000-0x81c0ffff) xps_ll_temac_0    mb_plb
(0x83400000-0x8340ffff) Generic_SPI    mb_plb
(0x83c00000-0x83c0ffff) xps_timer_0    mb_plb
(0x84000000-0x8400ffff) RS232    mb_plb
(0x84400000-0x8440ffff) mdm_0    mb_plb
(0x8c000000-0x8fffffff) mpmc_0    mb_plb
(0xfffff000-0xffffffff) xps_gpio_0    mb_plb Any thoughts? I was unable to find another instance of this error message.

Version 11.3 I actually figured it out, its rather odd that the generate addresses button doesn't do this automatically. It appears that the mask was set to trigger use of the cache on a single bit. 0x00800000. I had enough devices added where automatic address generation was using the most significant bit meaning that bit was falling within other address spaces. I changed it to 0xFFFFC000. (Basically telling it to match addresses if all address signals above 16KB are zero). I don't know if that is the proper way to do it, but it accepted it. Now I'm fighting with some stuff regarding an FSL bus I added that apparently isn't quite properly setup, so I haven't found out yet if the processor likes that address mask. But the tools appear to like it.

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

The document type does not match any of the given schemas. batching

I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.
Can somebody help me how to resolve this issue?

Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

I can't burn purchased tunes on a disc because of the infamous "error 4310". Why are loyal customers copntinually frustrated with the lack of or nonexistent answer to our dilemma? ITunes, why offer "support" if you are unwilling to give it?

I cannot burn purchased tunes on a blank disc because of the infamous "error 4310". Countless ITunes customers are frustrated that there are no "free" answers for this dilemma. Unfortunately, the "support" that is so highly promoted and encouraged is merely community members venting their frustrations.
ITuines this is not at all professional on your part.

Hi to everyone that replied and many thanks for your input.
I have bought well known and established artists CD's containing their music, track lists and artwork files from branded retailers. When I have loaded them into iTunes, it automatically loaded the artwork files FROM the CD I bought, so all that nonsense about audio CD's having nothing but audio isn't accurate. No, they were not DVD's either. I will endeavor to find a software package that CAN do what I need as an independent artist. iTunes just doesn't cut the mustard for me, even though it's free. I do know about issues with copyright and artists protection, but there should be something that can be done or made in iTunes, so it doesn't infringe copyright of artists, but can be used by artists like myself without the software being abused by freeloaders. Oh well, maybe when I'm too old for this malarkey...

LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

HI
When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
I 've no idea how to correct this weird error?
Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
regards,
james

Hello,
I don't reproduce this error.
Could you send your VI?
Regards
VéroniqueD
NI France

Windows server 2008 R2: The following fatal alert was generated: 40. The internal error state is 1205.

On my app server which is win2008R2, no IIS installed, I kept getting these errors:
"The following fatal alert was generated: 40. The internal error state is 1205." - Event ID 36888
"An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed." - Event ID 36874
I did a few search on google but they mentioned about the SSL. However, my server has no SSL installed. We don't have a need to put SSL on the app server. Any help will very appreciated.
-vecon

Simply ignore the message then.
If you would like to investigate further, you will need to identify the source of the TLS connection. If this is not logged in event viewer then you could give a look to IIS logs or simply use a Network Sniffer like Wireshark to inspect the traffic.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Getting following errormessage while transforming: "Could not transform because of a program error"

Hello,
one of our users is getting the errrormessage "Could not transforn because of a program error" on his MacBook Pro.
He is using Photoshop CS6. Photoshop and OSX (Ysemite) are up to date.
The MacBook is the current modell with Retinadisplay:
2,8 GHz Dual-Core Intel Core i5
Turbo Boost up to 3,3 GHz
8 GB 1600 MHz RAM
512 SSD
Intel Iris Graphics
The error does not appear regulary, but a few times a day. Does somebody know this problem or has/had it, too?

Getting this message while Defining Pattern: "Could not complete the Define Pattern command because of a program error"
This is a business and we have clients waiting for their projects!!!
I am getting this problem on my MacBook 2.26ghz intel core 2 duo, 8 GB 1067 MHz DDR3, NVIDIA GeForce 940 256MB operating the latest version of Yosemite and CS6
After spending a bit surfing forums trying to fix the problem, I decided that i needed to get my work done so i went over to my spare slightly older MacPro
I got the same error on the MacPro 2 x 2.66 ghz dual-core intel xeon, 10GB 667MHz DDR2 FB-Dimm, operating CS5 version 12 on OS X 10.6.8
This error message is not intermittent

The following fatal alert was generated: 20. The internal error state is 960.

Hi,
In Some servers including domain controller i am getting error in system event logs.
The following fatal alert was generated: 20. The internal error state is 960. ( In Domain controller)
The following fatal alert was generated: 40. The internal error state is 1205. (In same server CAS & HUB role is instaled).
An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed. (In
same server CAS & HUB role is instaled).
The following fatal alert was received: 46. (In same server CAS & HUB role is instaled).
I have read in many blogs some techie is telling to ignore the events. But i want to now exactly what is issue which is creating this alerts. Mostly in Domain controller i am getting this alerts. Kindly need your valuable suggestion and solution to overcome
the problem.
Thanks & Regards,

Hello,
for the first 2 errors you find answers like
https://social.technet.microsoft.com/forums/windowsserver/en-US/091a3222-641b-43a3-ae19-6cc238828950/certificate-services-cant-connect-using-ssl
https://social.technet.microsoft.com/Forums/windowsserver/en-US/a87505a3-1fd0-47b3-b6db-d36444da34fc/schannel-errors-36874-and-36888?forum=winserversecurity
So assure that used certificates are not broken.
Also it would be great to post the complete error messages and list all installed server roles and applications from that machines with the errors for a better overview.
Are all machines installed with the latest available SPs and updates?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

SSRS sub report not fitting exactly in the parent textbox in main report.

Hi All,
I have a small sub report placed in the main report. Everything is working fine except that the sub report not fitting exactly in the parent text box is bothering me and disturbing the look of it. Can any one tell me how to make the sub report fit to its
parent properly ???
contents of my report are as below.
1st column - project name,2nd column - location(sub report),3rd column - client name,4th - consultants(sub
report), 5th - registered contractors and date(sub report).
At the end of the sub report a line is displayed indicating its end. This is what i am concerned about.

Hello,
If I understand correctly, you have get a mess format with subreport.
We can adjust the subreport report body size and tablix with the same size. It will fit exactly in the parent text box. Please refer to the screenshot below:
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Report not generated because of the given error(Logon Denied)

Similar Messages

Maybe you are looking for