Report not printing all the characters -main section width greater than 11"

Hi,
I am trying to build/modify a Report (used in Oracle Apps) which will be printed on some perforated paper. The perforated paper is little bit wider (11.25 inches) than the regular A4 size paper.
The problem is when I print the report in Oracle Apps, the report isn’t printing all the characters at end of the page. I adjusted the page width to 11.25" in the main section's property palette, but the same thing is happening. Another point to mention is, I should use all of paper space.
I am not sure if it’s a report builder issue or oracle apps issue.
Any help is appreciated.
Thanks
Srikanth

You must have larger margin. Try to make smaller header and/or footer.

Similar Messages

  • Error - The version number in the package is not valid. The version number cannot be greater than current version number

    whats does this error mean
    i download 2008 r2 and try to open package but still getting error
    Error 1
    Error loading  The version number in the package is not valid. The version number cannot be greater than current version number.  
    Error 2
    Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".  

    can you tell me which version it is >
    i try to fix in dtexec
    getting following error :
    Started:  2:02:13 PM
    Error: 2015-01-30 14:02:14.68
       Code: 0xC000F427
       Source: Member Eligibility
       Description: To run a SSIS package outside of SQL Server Data Tools you must
    install Member Eligibility of Integration Services or higher.
    End Error
    Warning: 2015-01-30 14:02:14.69
       Code: 0x80019002
     Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution
     method succeeded, but the number of errors raised (2) reached the maximum allow
    ed (1); resulting in failure. This occurs when the number of errors reaches the
    number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
    rrors.
    End Warning
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  2:02:13 PM
    Finished: 2:02:14 PM
    i cannot upgrade original package

  • Export to PDF is not printing all the columns in one single page.

    Hi,
    I have a report, I am exporting the report to PDF, but ALL the columns are not printing in a single page, It is getting printed 2 or more pages.
    I am okay if I have a horizontal scroll bar or if the test size is reduced. Please see the recording and let me know whether it is possible.

    Sorry sir, It is a slip of the tongue, I corrected my response already.
    So it is defenitely possible to make ALL the columns appear in the same page in PDF regardless of how much width the report occupies?
    If yes, can I see a horizontal scroll bar or the text will be shrinked to fit the page?

  • Crystal report not showing all the table in SAP CRM

    Hi
    I am connecting crystal report 2008  using open sql connectivity (SAP table, cluster or Function ) with SAP CRM system. It is showing some of custom tables under "DD" but not all.
    Wanted to understand what setting make a new custom table (transparent) to show under DD in SAP table, cluster or function connection
    Help is greatly appreciated
    Thanks
    Padmanabh

    Hi Rao,
    Try to edit the following registry and check
    HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\FetchOptions\NTablesMax
    Give the value as 20000
    Thanks,
    Sastry

  • PDF not printing all the iamges or backgrounds

    I have a PDF document that has some various images and things on it.  Certain things are not printing for some reason.
    The specific information is I have a sheet of Guitar information.  On one page there's an example of a chord block.  The numbers showing what finger to put where shows fine but the actual gridlines that make up the strings and frets do not work.
    An example is this:
    http://www.freewebs.com/guitarlincs//Moveable%20Chords%20101/Major%20Barre%20Chord%20A%20S hape.jpg
    The numbers in circles show up but the actual lines do not.
    On other parts, whole examples of sheet music with bars and notes and everything just don't print.  They show up fine in the little preview window but not on the actual page.
    I found that if I set the "Print as Image" box, then it does print but it then takes 45+ seconds to process each page before it actually prinst which is not something I want to wait for.
    I'm not sure if these are setup as images or backgrounds or what in the actual PDF as I didn't create it.  Is there a setting to print backgrounds and things if that's what it is or is there any other setting anyone can think of other than the Print as Image option?
    Thanks.

    Here's a link to the page in question (although there are other pages as well):
    http://dl.dropbox.com/u/1787993/Guitar/Page_7_from1.L%26M_Guitar_Manual.pdf
    What I found is that if I print to my main printer (HP 4300), the gridlines of the pictures in the middle of the page don't show up.
    If I print to the Xerox 6360DT that I have, the picture shows up fine.
    There must be a setting in the HP properties that's making it not work but I haven't been able to figur out what the setting is.

  • Report not displaying all the rows

    Hi Experts,
    We are having a report which when ran for a year as a filter criteria gives me 6725 rows and i also observe that there are more rows which are not getting displayed. Is there any restriction with the no of rows getting displayed. I am also able to find the specific information of a particular vendor when i explicitly filter it. Which would otherwise not get displayed in the normal report execution for the entire year. Thanks
    Warm Regards,
    Akilesh

    Hello Akilesh,
             This is the issue with your Bex Analyzer...! please update ur Bex with all the latest patches. I am sure this report sould be running on other mechines...
    I will try to find the concern patch in t he mean while..!
                   EnjoySAP

  • My printer will not print all the pages.

    Hello
    When I press print on my HP Deskjet printer 2544, it only prints one or two pages before saying 'Error printing' 'Could not print.' It's happened ever since I got it a few months ago.
    Thank you 
    This question was solved.
    View Solution.

    Hey there @hapy84 
    Thanks for posting on the HP Forums today!
    I can see your getting errors with the Deskjet 2544.  I should be able to provide some assistance in locating a resolution!
    Is the error message showing on the printer screen or coming up on the computer?
    I suggest checking to see if the issue is coming from the printer or the software in the computer.  A good way to check the printer hardware is to run a stand alone photo copy.  I recommend doing a 5 page copy of a blank page to ensure the printer can feed more then 3 pages without displaying an error message. 
    Here is a link regarding Copy Text or Mixed Documents on the Deskjet 2544.  When performing the copy you do not have to put a document on the glass.  That way the printer will feed blank pages and you are not waisting ink.
    If the hardware in the printer is OK then there is likely an issue with the HP software in the computer.  I would recommend uninstalling and re-installing at that point.  To uninstall HP software from the computer please follow the link regarding Uninstalling the Printer Software
    To reinstall the HP software to the computer install the CD.  If the CD is unavailable or does not work for any reason please follow the link for HP Deskjet 2544 All-in-One Printer Drivers. This will link you to the HP drivers page so you can download your printer software.
    Follow the link:
    Click Next
    Scroll down
    Click Driver - Product Installation Software (‏1)
    Click "download" next to HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers
    Run the download 
    Follow the HP install
    Let me know how it goes and thanks again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Sql report not accounting all the tickets

    Hello all,I currently am trying to put together a sql report to use since the manual reports don't include all the information I need. I am currently using the following code."select t.c_type_of_service "Type of Service", t.category, (select (COALESCE(SUM(tw.time_spent), 0)/60)) as "Time Spent (minutes)", '$'||(select round(sum(tw.labor),2)) as "Labor Costs", Count(DISTINCT tw.id) as "Ticket Count"FROM ticket_work tw INNER JOIN tickets t ON t.id = tw.ticket_id where datetime(t.closed_at)>=datetime('now', '-30 days')and t.category != 'projects'group by t.category, t.c_type_of_service"The issue is that when I run the report it is roughly missing about half my tickets for this month. I am very new to using sql so any help would be appreciated.
    This topic first appeared in the Spiceworks Community

    You must have larger margin. Try to make smaller header and/or footer.

  • Why does "Print Booklet" not print all the files in book?

    My new Indesign CS4 will not let me do what I was able to do easily with Pagemaker 6 and Indesign CS2.  When I go to “Print Booklet”, the program will not print the entire book, but only whatever file is check marked at the bottom of the WINDOW tab on the Menu Bar. I have tried with the files in the BOOK Menu selected and not selected. No difference. I have tried every way I can think of to add and link the files indicated in the Book Menu to the actual files. Each time the same. I have reinstalled the program. Still the same. I am using a Mac PowerBook G4 with OS X 10.4.11.  Your ideas and help will be greatly appreciated..........Richard

    Sorry, Print Booklet simply isn't designed to be used with multiple files. You'll notice it isn't available in the Book Panel menu.
    You could export the entire book to PDF, then place the PDF in a new document and use Print Booklet to print that.

  • L7680 not printing all the black, please help!

    I've got a HP L7680 that has original cartridges, in date etc etc but as of yesterday evening was missing bits of the black text when printing. The colour text was fine, but horizontally black bits were missing about a 1/3 and 2/3 of the way down, any ideas?? Thanks

    Heads might need to be cleaned.

  • When text is low on the page, it does not print on the page!

    Office Jet J6480, Windows 7 32 bit.
    Sometimes pages with a content line near the bottom of the page, does not print or the characters are only partially
    printed on the output page.

    Hello, you may be able to fix this problem on your HP Officejet J6480 All-in-One Printer by following the steps in the following document: "The Product Does Not Print the Bottom Page Border in Microsoft Office": 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01671543&tmp_task=solveCategory&cc=us&dlc=en&la...
    There are two more links inside that web page with some other solutions if you are experiencing this problem with other Operative System:
    -Printed Text is Cut Off on the Last Line of the Page in Windows XP
    -Printed Text is Cut Off on the Last Line of the Page in Windows Vista
    I am an HP employee, Printer/All-in-One Expert.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon"
    Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.

  • Adobe reader not printing all document content.

    I am printing from a web based PDF document and it will not print all the document/ form content.
    I am using a Win7 computer, IE 8, and an HP DJ 2400 printer
    I have tried un-enabling advanced fatures, tried changing the print processor, and tried changing the options from document, to document and markups, to document and stamps, all to no avail.
    I know there is a simple issue and resolution to this, but I just can't remember what it is.
    Thanks in advance
    IKE

    Try copying the file to your local machine and then print it from there. So when it opens, click "File", then "Save a copy".

  • The version number cannot be greater than current version number

    i am deployingmy ssis package which is in 2012.(version 6)
    and my ssis server also in 2012.
    but i am getting error:
    "the version number in package is not valid, the version number cannot be greater than current verison number"
    and one more thing how to see ifmy package is in 2012,by looking it in notepad?

    Hi coool_sweet,
    Based on the error message that "The version number in the package is not valid. The version number cannot be greater than current version number.", we can infer that the underlying cause may be that the current SSIS package is created in SQL Server
    2012, while you are trying to open or execute it in SQL Server 2008R2 or earlier versions.
    As to your scenario, I guess you are using old version of the DTEXEC instead of the new one to run the package. That means, the exe shipped with 2008R2 or earlier versions is picked up when it is expected to use the one shipped with 2012. So, obviously this
    happens when SQL Server 2012 is running along with SQL Serve r2008R2 or earlier versions on the same machine.
    To fix this issue, there are three workarounds to correct this.
    Hard code the path of SQL Server 2012's DTEXEC while calling the SSIS package as shown below.
    C:\Program Files\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
    Rename the old exe in the 2008R2 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC_Old.exe)
    Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\110\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Report header section does not print all pages

    Hi,
    I have a custom report that consists of all 3 parts. it has a header section, main section, and a trailer section.
    I have a problem in a header section that it does not print all pages. It only gives the output of the first page and the last page for the header section.
    I open the .rdf file with oracle reports 6i .
    what do i need to check please?

    Please refer the following thread:
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-dev-l/report-header-section-does-not-print-all-pages-4166062

  • BI publisher report is not showing all the data

    Hi All,
    I have created a report using BI Publisher in R12. The report is not showing all the records.
    I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
    what might be the issue.please give me some idea to resolve this issue.
    Thanks in advance.
    Regards,
    P.Kalidoss

    Hi Arun,
    In the following code: public SelectItem[] getAllPrinters() {
    if (allPrinters == null) {           // allPrinters is not defined. what type of object it is
    PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
    allPrinters = new SelectItem[printers.length];
    for (int i = 0; i < printers.length; i++) {
    SelectItem printer =
    new SelectItem(printers.getName(), printers[i].getName());
    allPrinters[i] = printer;
    return allPrinters;;;
    Variable allPrinters is not defined. what type of object it is?
    And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
    value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
    id="soc1"
    autoSubmit="true">
    <f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
    </af:selectOneChoice>.
    Thanks.

Maybe you are looking for