Report not running in BEx browser and RSRT in production

Hi All,
For one of the report I am getting very different error in production system. I am able to run the query in BEx analyser but when tried to run in Bex browser this gives error and terminates the report. When tried to run through RSRT it gives error and shows that some charcteristics are removed from infocube. This means it is using some very previous version of query. But afterwards the query was changed and transported to production. Still why am I getting this error.
As if the RSRT is accessing the old query and it is not refreshed the new one. If checked in designer it shows the latest query there. Can anybody suggest what could be the issue here?
Thanks in advance for your help.
Regards,
Wrushali

Hi,
Actually if we make a new query and save as then it works but this query doesnt work. The transport is ok. No error just warning is there.
I tried the delet old ABAP and generate query but still geting the same error. Can you tel me what this delete old ABAP does.
When execyted the query it goes to debug mode and some code is executed and if we check the dump is shows RAISE EXCEPTION and error in some SAR...RT19 program.
Please suggest if any idea.
Regards,
Wrushali

Similar Messages

If you're NOT running Aperture 3.6 and want to update to 10.10.3 - read this FIRST.

If you’re NOT running Aperture 3.6 and want to update to 10.10.3 - read this FIRST.
In this personal scenario, I used a Mavericks (10.9) test hard drive to see what would happen if I updated to 10.10.3. No photos were harmed in the making of this post. I have full redundant back-ups of everything as should you before attempting ANY OS update. There simply is no excuse not to back up and keep your personal data protected in this day and age.
Now that’s out of the way…
If you’re not running Aperture 3.6 (which I believe is only available if running 10.10.2), updating to 10.10.3 will disable any version of Aperture below that and it CANNOT be updated or found on the App Store, or downloaded from anywhere else. Both the Aperture and iPhotos icons in the dock will have a white circle with a line going through it.
If you click to open Aperture, the computer will prompt you to update to the latest version because the current version is not compatible with Yosemite. After you acknowledge that, it sends you the the App Store where you will be met with a message that states “Item not available”. It also no longer appears in your purchase history so you can’t update it from there either!
You’re now forced to use the new Photos app.
Upon it’s it’s first launch, the Photos app will create a new library for itself and migrate/duplicate all Aperture photos into it. Effectively doubling the disc space used by your pictures...
This behavior apparently does not happen going from 10.10.2 to 10.10.3. In this latter scenario, Photos still uses the Aperture library and creates a smaller Photos library migrating only the metadata it seems. The actual photos are still referenced from the Aperture library and you can continue to use Aperture (3.6) if you choose. The libraries are NOT unified though. Changes made in one will NOT be reflected in the other.
In other words, you cannot leap-frog update if you want to continue using Aperture.
The 10.10.2 Combo Update “may” solve this problem but I have not tested it. Here is a link if you’re feeling brave. https://support.apple.com/kb/DL1786?locale=en_US
Here are some screen-shots.

I had been trying to download 7.0.1 with Firefox 3.6. Just would NOT download. Well, I opened another browser, Safari, went to the download page, and the download worked. Who knew?
All is well now.
Thanks for the reply.

Could not run the web browser

I've installed Reader 7.0.9 in order to read ebooks. When I try to activate the mobile device, reader responds with "Acrobat could not run the web browser. Unknown error. (0)". Is there a plug-in missing or corrupted control somewhere. Any suggestions. This is XP SP2 (and SP3) on a Dell Precision.
Any suggestions.

Let me amend my comment. Reader 7 might have been tested with XP SP2,
but with all the changes in the OS due to security changes, OS changes
and browser changes, Reader 8.1.3 or Reader 9 would be a better match to
your software.
Mike

Applet not running in local browser

I can run any applet from web.
I can run any applet in appletviewer.
But I can not run applets in browser from local html file.
I can not run even the demos that came with de SDK 1.4.1_01.
Can anyone give me some hint?
Maybe is very obvious but I ca not see it.
Thank you very much.
Valeriu Sprintu

the hello.java file is:
import java.applet.Applet;
import java.awt.Graphics;
public class hello extends Applet {
StringBuffer buffer;
     public void init() {
     public void start() {
     public void stop() {
     public void destroy() {
     public void paint(Graphics g) {
          //Draw a Rectangle around the applet's display area.
          g.drawRect(0, 0, size().width - 1, size().height - 1);
          //Draw the current string inside the rectangle.
          g.drawString("Hello", 5, 15);
The hello.html file is:
<html>
<body>
Applet should be there
<br>
<applet code="hello.class" width=200 height=200>
No applet
</applet>
</body>
</html>
hello.html and hello.class are of course in the same folder.
If I modify the .html file acording to OBJECT tag specifications for Java Plug-In the same applet runs OK in the browser (IE5.0 ).
I forgot to tell that I have installed the last version of SDK j2sdk1.4.1_01
<html>
<body>
Applet should be there
<br>
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = 200 HEIGHT = 200 >
<PARAM NAME = CODE VALUE = "hello.class" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.1">
No applet
</OBJECT>
</body>
</html>
I think there is a problem with the JVM from Microsoft
Thank you,
Best regards,
ValeriuS

Quicktime plugin will not run in any browser including Safari! Help!

Quicktime plugin will NOT run in any browser. I've been reading a lot about this issue and it seems to be a widespread problem. I didn't have this issue a few weeks ago. perhaps it has something to do with OS 10.6.7? Help, desperate for a solution.

Post a URL? Not sure what you mean as it does not seem to be website specific. I can't view apple movie trailers on apple.com in Safari or Firefox. The plugins just are not there. I've download QT and it shows up in my Utilities folder but no where to be found within firefox plugins/add-ons - same goes for Safari but the plug-ins I do have ARE enabled. Each time I try, I get the install missing plugin prompt, which I do, and as stated before - nothing happens. I've read a lot about moving things in/out of internet plug-in folders in various places, preferences folders, etc. but no luck so far.
Thank you.

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

Does hide a frame means do not run/execute that frame(and its query) ?

Hi Everyone
Does hide a frame means do not run/execute that frame(and its query) ?
Thank you
Bryan

No. It means setting the Format Trigger of it to reurn FALSE, so it won't display.

Report not run inexplorer and report server not start

sir
i install dev suit 10g and
1. create new form and test that run in explorer
2. create report and test in report builder that run and give right result, but when i test in explorer that not run and no error and report server OC4J not start i try but window appear and hide
please give me idea how run report in explorer
regard
fahim

The normal procedure for the Developer Suite is:
1. Start OC4J instance via Windows Start menu.
2. Run a report:
http://127.0.0.1:8889/reports/rwservlet?module=....
That doesn't work?
Can you see the in-process report server?
http://127.0.0.1:8889/reports/rwservlet/showenv?
Or errors in the job queue?
http://127.0.0.1:8889/reports/rwservlet/showjobs?
(note that your port number may be different)

CC clean up tool saying some files did not get cleaned close browser and run again

When I run the clean up tool saying some files did not get removed try closing browser and run again did not have browser open CC will not start spinning progress wheel but never connects

contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Bex Browser and roles

Hello All,
We currently use the BEx browser to deploy the queries and workbooks to all the users.
We have set the auth object S_USER_AGR with the value '03 - Display' only.
However, what we are observing that the users are having the capability to move workbooks from their favorites to the roles.
When we run a trace for authorization check, it is checking the above auth object and shows a value being returned for 01 - Create, 02 - Change, 06 - Delete.
Object Text
S_USER_AGR RC=0 ACT_GROUP=NY_BW_WP_QUERY_USER;ACTVT=02;
S_USER_AGR RC=0 ACT_GROUP=NY_BW_WP_QUERY_USER;ACTVT=01;
S_USER_AGR RC=0 ACT_GROUP=NY_BW_WP_QUERY_USER;ACTVT=06;
However, in the above mentioned role, the only value assigned is 03 - Display.
The users have no other roles which would override the values.
We want to ensure that the users DO NOT have the capability to save the work books from their favorites to any roles.
Any ideas?
Sunil

"The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser."
http://help.sap.com/saphelp_bw33/helpdata/en/7a/87583c2439e66fe10000000a114084/frameset.htm
"The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel."
http://help.sap.com/saphelp_bw33/helpdata/en/ba/45583ca544eb51e10000000a114084/frameset.htm
Hope it helps!
Bye,
Roberto

Crystal reports not show in my browser

i am using vs 2013 sap sp9 reports show in tools crystal reports but i am run in browser reports not show in browser

Hi,
I am afraid that this issue is related to third-party, and it is not supported in these forums.
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help I itunes will not recognize my iphone or ipod. Trouble with USB driver, device not running in safe mode, and HDCP not supported.

Help! When I connect my iphone or ipod touch to my computer, windows recognizes my device but itunes will not. I can still see my songs, videos, and access the itunes store but my phone and itunes store have no connection so it does me no good. I have for 2 days now tried every trouble shooting method posted with no luck. I think I may have finally found a lead. My Apple Mobile Device USB Driver is showing up under portable mobile devices while it is supposed to be showing up under universal serial Bus controllers from my understanding? Also, while running my diagnostic report under itunes it also says itunes is not running in safe mode, it is not showing enabled in windows firewall (which it is checked), and the HDCP is not supported. I don't know what to do? I am in tears here, someone please help!!!

See Here for Device not recognised:
http://support.apple.com/kb/TS1538
Here for General Support:
http://www.apple.com/support/
This may also be helpful:
AMDS for Windows
http://support.apple.com/kb/TS1567

"qmasterd not running" - how this happened and what we did to fix it.

For this with the message "qmasterd not running".
This may be of help to those of you who are unsuccessful in
• initialising qmasterd
• can't sucessfully 'START' qmaster from the system preferences panel
• can't start qmasterd from the shell or the startupitems
• can't establish a cluster in qmasteradmin.app
• etc etc
Taste will vary ofcourse.
SOLUTION: after 2 days of concentrated troubleshooting on this we REINITIALISED the startup disk and RE_INSTALLED THE 10.4.8 O/S and all the applications and replaced (copied) the user data on the primary startup disk.
Affected H/W:
• g5 QUAD w/8GB memory and 3.7TB disk (including 2 x 250SATA internal DDMs) with 7800graphic card
• 30inches HD Cinema display
HIstory:
• decided to UPGRADE internal 2 x 250GB SATA1 DDM's with 2 x 500GB sATA2 DDMS because of storage shortage.
• on advice, we used APPLE MIGRATION ASSITANT to migrate 100% functional OS 10.4.8 startup disk (Macintoish HD) to external FW disk that had a fullfunctional 10.4.8 and apple pro apps as a back up. (This proved to be a very bad error of judgement - a mistake)
• all data migrated over to external disk sucessfully. System restarted on EXTERNAL DISK and tests (TTPRO) and user apps run - all is ok
• replaced G5 internal UPPER SATA1 250GB disk with new SATA2 500GB .
• using G5 startup DVD's , built and initialised OS/X 10.4.8 system on NEW G5 QUAD internal UPPER 500GB SATA2 disk as Macintosh HD.
• used Apple MIGRATION ASSISTANT to migrate all user and apps and ALL the files and objects from the working EXTERNAL disk we made earlier.
• reatrted and all looked fine. FCS, SHAKE, MOTION etc etc.. all business apps. UNTIL!..
• we could NOT get qmasterd to start - msg "qmasterd not running"
• restarted system many times.. no success.
ERROR SYMPTOMS:
• noticed sever apps were corrupted such as WACOM TABLET, LIttle SNITCH and others - these were remidied by reinstallation ... however..
• console crash reporter contained MANY dumps of qmasterd with general addressing exceptions:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0nnnnnnn
also r31 contined the page aligned address of the exception.. and this was ALWAYS different.. so assumed a data driven (parm??) corruption.
• other symptions include that need to kill -9 (force quit) qmasterd as it would NEVER shutdown.
WHat else we did to try and fix this:
• repaired disk permissions (disk utility.app) - no luck...
• repaired qmaster files disk permissions as per http://www.kashum.com/blog/1152611689 and follwd instructions.. no luck
• removed QMASTER as per the instructions at http://docs.info.apple.com/article.html?artnum=93234 - reinstalled - NO LUCK - still dumps... ;(
• removed all the qmasterd parms hoping that would help - no luck
• used many sugesstions form these discussion, COW etc .. including disconnecting all networks... no luck
• tried out most of the suggestions including an excellent on from Richard BF at http://www.kashum.com/blog/1152611689 - a trully excellent entry for those with the issue of Unable to connect to background process' error dialog problem.
• einstalled QMASTER for SHAKE4.1 disks - no luck
• resinstalled FCS (2 hours later) - no luck
• restarted on secondary system (the external disk) and QMASTER works fine!
• reinstalled the original 250GB SATA1 - restarted form it to verify QMASTER was ok.. no dumps existed.
• reinstalled OS 10.4.8 (OS only) .. no luck
• used CARBONCOPY (CCC) to make new disk - this failed miserably .. will not use this again ever....
final outcome:
• concluded that APPLE MIGRATION ASSISTANT had somehow corrupted some objects in the SECOND GENERATION of copy) from external DISK to new internal 500GB SATA2 drive.
• threw the towel in and initialised the G5 QUAD's UPPER internal DDM (500GB SATA2) - installed a new OS to 10.4.8 + maint
• tediously installed every APP including ADOBE CS2 and the CS3 photoshop whilst I mess around calling Adobe locally for an activation code (I always need to do this I dunno why).
so a great waste of 2 days.
Summary: when QMASTER works it is terrific.. especially for rendering and transcoding... but when it doesn;t it is dreadful.
Maybe someone with expertise could shed some light on this.
cheers
W
Hong Kong

HI Chris, I closed it because:
• at the time + a few eeks after I posted it, I had few views of it .
• it is just a reference document to suggest the trouble shooting procedures and headaches we endured to try and rectify it in the view that others may try this path
• it is in fact old news for some who have FCS 2 now.
The 'fix" is described in the "SOLUTION" part of my post.
I agree your symptom you are having wth QMASTER is of great frustration.
I would encourage you however to perserve to get this working because wehn set up it works very well.
fwiw

The slide show runs in "live mode" but will not run from the browser.

Here is the link to the web page http://www.williamshomesteadranch.com/welldone.html
This is the first time that I've tried to use a widget and it looks good, but will not run fromthe browser.

The answer to the problem is very simple, the main images cannot be found. Please have a look at the following markup starting with line 305 or thereabouts:
      <ul id="ImageSlideShow" title="Jesse the Border Collie">
        <li><a href=Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg src="Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg" title="Jesse"><img src="Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg" alt="photos-1.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg src="Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg" title="Jesse and his Friend"><img src="Spry-UI-1.7/jackandjesse/jackandjesseonbeachthumbnail.jpg" alt="photos-2.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg src="Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg" title="Jesse playing soccer with his friend"><img src="Spry-UI-1.7/jackandjesse/jackjessesoccerthumbnail.jpg" alt="photos-3.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg src="Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg" title="Jesse and his Friend resting"><img src="Spry-UI-1.7/jackandjesse/jackjesserestbeachthumbnail.jpg" alt="photos-4.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg src="Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg" title="A Walk down the Beach"><img src="Spry-UI-1.7/jackandjesse/jackjessedwnbeachthumbnail.jpg" alt="photos-5.jpg" /></a></li>
      </ul>
Now take a closer look at the first image.
The thumbnail is jacksjessethumbnail.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg. Bless me, the thumnail is there. No problem here.
The main image is jacksjesse251x270.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg. Lo and behold, the image cannot be found. The problem must be here.
We can do the same analysis for each of the remaining images with the same result. This means that the main images have not been uploaded to the correct folder or that the path to the main image is incorrect.
Assuming that the path to the main image is correct, using DW, have a look in your local folder as follows
Then 1. single left click on the jackandjesse folder to highlight it, 2. click on the symchronise button, 3. make sure you have the correct selections in the Synchronize Files dialog and click on preview.
Then click on OK as per
and the files should be uploaded to the correct remote folder.
Gramps

6i Reports Not Running in Windows 64 Bit PC

Hi All,
We have installed 64 bit version of Windows in some PC’s. We are running Forms and Reports 6i from that PC. But only forms are running fine reports are not running. Have any one of you encountered this problem and got that resolved.
Please share with us the resolution for the same.
Thanks in advance

Hello - I have been able to get the AIP installed.
Turns out that the installation was hanging because a previous version of Acrobat was already installed. On other machines with Acrobat, I would get a window stating that I had to remove the old software but on W7 x64, the installation simply failed. After removing the old version and trying again, the new installation succeeded.
Thanks to everyone for their help.

Report not running in BEx browser and RSRT in production

Similar Messages

Maybe you are looking for