Report not working if scheduled in background as a job

Dear friends please help me in this.
We are having a z report. This report works fine in foreground and wont work
( means it will be in active state for more than 5 days but no result will come)
when we schedule it in background as a job.
In this report we are using bdc code also for uploading data. the same code is
FORM bdc_transaction USING tcode.
  CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      tcode     = tcode
    TABLES
      dynprotab = webdcdata.
  WRITE: /(25) 'BDC_INSERT'(i03),
               tcode,
          (12) 'returncode:'(i05),
               sy-subrc.
ENDFORM.                    "BDC_TRANSACTION
and i am populating the data in bdc
PERFORM bdc_dynpro      USING 'SAPLMR1M'      '6000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'    'ENTR'.
      PERFORM bdc_field       USING 'BDC_CURSOR'    'INVFO-BLDAT'.
PERFORM bdc_dynpro      USING 'SAPLMR1M'    '6000'.
      PERFORM bdc_field       USING 'BDC_OKCODE'  '=BU'.
      PERFORM bdc_field       USING 'BDC_CURSOR'  'DRSEG-RBLGP(01)'.
      CALL TRANSACTION 'MIRO' USING webdcdata MODE p_mode UPDATE 'S'
                                    MESSAGES INTO itab_msg.
etc.
First i am populating data into an internal table and then displaying it in the output screen. Here i hava placed a menu items like select all , deselect all , upload etc . So that user can select as many records as he want and then can select the upload button
so that the report will call bdc to upload the data.
when i am directly executing the report it displays the data and then
i will select the records that are diswplayed and
then i press tghe button upload then the data will be uploaded into
the screens. here i am not getting any problem everything is fine.
when i am scheduling this job in Background it will be keep on
running but no result will be displayed. Atleast output screen
is also not displayed. Later on i came to know that we
cannot schedule the reports which are using bdcs in background.
So please tell me how far it is true. Please give me a clear explaniation for this .
Thank you so much for all the replies.

Try to record your transaction using trans. SHDB and select the check-box "Simulate background".
Not all the dynpro runs same in background and in foreground. Always check the background simulation: when you record, and when you run bdc in foreground.
Kanagaraja L

Similar Messages

  • Drill down report not working in 1og report

    hi all,
    Drill down report not working in 1og.
    in 6i it working good but 10g not working .
    plz help any one.
    thanks

    Hello,
    For detailled instructions about hyperlinks :
    Oracle® Reports Building Reports
    10g Release 2 (10.1.2)
    B13895-01
    3.6.10.1.8 Creating a hyperlink using the Property Inspector
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
    Regards

  • CDR report not working

    Hi,
    We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
    Kindly suggest troubleshooting steps.
    Can we have any SQL query to fetch the report from database?
    Thanks
    jitender

    Hi Raju,
    From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
    " No results match the report filters. Change the filter values and submit the query again."
    Thanks
    jitender

  • IPS event monitor and reports not working

    Dear after upgrading my IPS from E3 to E4  the event monitor  and reports not working, can you please advice my to solve this issues

    Hi All,
    Filter settings below:
    The filter works partially as I don't get alerts on the IPS itself.
    Firewall LOG:
    4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
    IPS LOG (when enabled):
    evIdsAlert: eventId=1352793300955167909  vendor=Cisco  severity=low 
      originator:  
        hostId: SSM02 
        appName: sensorApp 
        appInstanceId: 1192 
      time: Feb 14, 2014 15:33:22 UTC  offset=0  timeZone=GMT00:00 
      signature:   description=IP Fragment Too Small  id=1206  version=S212  type=anomaly  created=20030801 
        subsigId: 0 
        sigDetails: Too many small IP fragments in datagram 
      interfaceGroup: vs0 
      vlan: 0 
      participants:  
        attacker:  
          addr: 172.x.x.x  locality=OUT 
          port: 39715 
        target:  
          addr: x.x.x.x  locality=OUT 
          port: 514 
          os:   idSource=unknown  type=unknown  relevance=relevant 
      alertDetails: InterfaceAttributes:  context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ; 
      riskRatingValue: 50  targetValueRating=medium  attackRelevanceRating=relevant 
      threatRatingValue: 50 
      interface: GigabitEthernet0/1  context=single_vf  physical=Unknown  backplane=GigabitEthernet0/1 
      protocol: udp 
    Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
    Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
    Regards
    Mariusz

  • After i install Visual-Studio 2013 crystal-report not working

    hi
    after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
    when i try to open crystal-report i see this:

    Hi E_gold,
    Crystal Reports forum may be a better place for you.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Interactive Reports not working with APEX listener

    Hi,
    I have posted this question APEX listener forum couple of weeks ago but very few responses.
    If any one from here can help then it would be great.
    Interactive Reports not working with APEX listener
    Best Regards,
    Baig

    Sorry for late response.
    It was a firewall issue

  • BPC75NW: Offline Distribution of reports does not work in Schedule mode

    Hello BPC experts,
    I'm new in SAP world.
    I have the following problem.
    In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
    I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
    The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
    Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I  know no other passwords).
    At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
    Tell me, please, if faced with a similar problem, how it can be solved?
    Thank you for your help, this is greatly appreciated.
    Regards,
    Todoshi Takato

    Moved to .NET SDK forum.
    Search here, lots of post on IIS and setting Printer Access Permissions for your application.
    Also search MSDN on what is required to for IIS to access local Printers.
    Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
    Don

  • Dynamic Selection on report not working

    Dear all,
    I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
    Is there some configuration to make to this report so that the dynamic selection works?
    Thanks for ur help.
    Nas

    Also Nelmaz,
    I have just checked OSS notes and found below note helpful to you:
    Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
    Symptom
    You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
    Hope this helps.
    Please assign points as way to say thanks

  • Report giving error when scheduled in background (ABAP/4 processor:PERFORM)

    Dear Freinds,
               I have written a custom program and iam not able schedule in background, if check in SM37 the job getting canceleld and found as the error ABAP/4 processor: PERFORM_NOT_FOUND.
    Please could you let me know should i specify in my custom program for get sucessfully run in background . or could any one please let me know any setting should be done for my custom program
    regards
    madhuri

    Hi
         when i run in foreground it is working perfectly. The Spool is not getting created.
    regards
    madhuri
    Edited by: madhuri_2000 kumari on Nov 26, 2008 2:00 PM

  • ISE Guest Activity Report not working (1.2.0.899)

    Recently I upgraded an ISE to 1.2.0.899. I found the Guest Activity Report is not working. Before the upgrade it was working properly (with the limitation of 5000 records by report). Nothing in the ASA was modified, but nothing is reported in the ISE; also I use the tcpdump integrated in the ISE to validate the syslog messages are arriving from the ASA to the ISE. I already enable the Passed Authentication logging category.
    Do I need to modify something else,to have the report?

    Hi
    Please make sure these steps has configured correctly:
    Step 1 Create an alarm, as described in Creating, Editing, and Deleting Alarm Schedules.
    Step 2  Specify a rule for Passed Authentication, Failed Authentications, or Authentication Inactivity for all users of                 type guest, as described in Creating and Assigning an Alarm Rule.
    Step 3 Calculate guest user activity by Monitoring Live Authentications.

  • Discoverer report not working on R12 !

    We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
    Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
    Thanks

    Thanks Srini,
    There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
    Any pointers?

  • Crystal Report not works in JAR File

    I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
    "com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
    com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
    Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
    ReportViewer.jar
    jrcerom.jar
    Concurrent.jar
    CrystalCharting.jar
    CrystalCommon.jar
    CrystalContentModels.jar
    CrystalExporters.jar
    CrystalExportingBase.jar
    CrystalFormulas.jar
    CrystalQueryEngine.jar
    CrystalReportEngine.jar
    CrystalReportingCommon.jar
    icu4j.jar
    keycodeDecoder.jar
    log4j.jar
    MetafileRenderer.jar
    rasapp.jar
    rascore.jar
    rpoifs.jar
    Serialization.jar
    URIUtil.jar
    xercesImpl.jar
    xml-apis.jar
    and the mysql-connector jar file
    Anybody help me please...

    Unable to load database connector
    'com.crystaldecisions.reports.queryengine..driverImpl.
    DriverLoader
    now you have any idea.. pleaseIs that a typo where you have two periods below?
    queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
    My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

  • Report not working in my system

    Dear All,
    I have Developed a ZHR report. But the problem is the it is working only on my ABAPers Terminal(PC) and not on mine.
    Not working means the Action that it should trigger in PA40 is not happening.
    The Client is same.
    The User ID is same.
    The User parameters are same.
    The GUI Version is same.
    The authorizations are the same.
    Is there any other setting that i need to check.
    Regards,
    Saureb Bannerjii
    SAP HR Consultant

    hi,
    one possiblity is to check the user profile of your abaper's login and your login. If you are using different login id for checking the reports
    Regards
    SAmeer.

  • Report Not working in the Web Browser

    Hi ALL ,
    Am working on a item SKU report . The report is running fine in the BIDS but once i try to view the report in the WEB Browser
    tried both Mozilla and Internet Explorer no data is shows up .
    The report has 2 report filter one is on the service and the other one is the item sku its a multi - parameter  that contains
    a list of more than 6000 different SKU . Can the filter be the reason for the report not displaying in the web browser.
    If yes kindly advice me what the workaround for it .
    I tried having the filter in the  SQL main query but it was of no use no data it was showing after having the ssrs report filter
    at least right information its showing but in the BIDS not in the main web browser.
    Kindly Help
    Priya

    Hi Priya,
    According to the description, I understand that there are parameters (@SKU and @SKUlist) in the report, and SKUlist parameter is multi-value parameter. When selecting values of the SKU parameter, the parameter SKUlist will display corresponding values. In this
    case, you should create cascading parameters, right? And you use parameters to filter the report.
    Because the data of the report can be shown in the Business Intelligence Development Studio (BIDS) environment, the issue only occurs after deploying the report to report server. Based on my research, I think it may occur because of web browser issue. I have
    known you use Mozilla and Internet Explorer to view the report but there is still no data.
    In Reporting Services, not all report functionality is supported by all browsers. In this scenario, I suggest you considering the aspects of the setting or third party add-ons of Internet Explorer (IE). You can refer to the steps below:
    1. Click Tools -> Internet options.
    2. Switch to the Security tab, click Local intranet, and then select Default level.
    3. Switch to the Advanced tab, and click Restore advanced settings.
    4. Temporarily disable third party add-ons. For detailed steps, please see the link:
    http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
    Reference:http://technet.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • On Demand Sub-Report not working

    Hello,
    I am using crystal reports xi-r2 I am having trouble getting an on-demand sub-report to work. After much trouble I am able to get the sub-report to work in the designer but as soon as I publish the report and access it from the CRS. It stops working. I can not get the sub-report to come up. Or it opens another window like it is going to show the sub-report but I get the original report again.
    My second question is how do I open a trouble ticket now that this has all moved to SAP?
    Thanks for your help.
    Jeff

    As this isn't working in CRS you may want to re-post this to:  BusinessObjects Enterprise Administration
    www.service.sap.com would be a good place to go to get service

Maybe you are looking for