Report object

hi frds plz give me clearly
any critical report object
plz give me with transaction codes
to my mail id
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 27, 2008 5:27 PM

Hello Babu
You may want to have a look at area menu SUIM (User Information System).
In the folder User you find the transaction S_BCE_68002111 (List of Users with Critical Authorizations).
SAP delivers already some predefined values for critical authorizations. However, the major part has be defined by the customer since this can vary on a large scale.
Regards
Uwe

Similar Messages

Problems after creating report object

I am using Crystal Reports Server XI R2 SP4. I created a report object from a simple Crystal report successfully. Even the thumbnail showed the report data even though the report does not save data.
However when I view the report object in InfoView or schedule it there is no report data even though Crystal Reports Viewer displays data when run against the same DB with the same parameters.
I get the same results with any report object I create in CMC but I was to able to successfully create and run report objects the first few(5) times after which I have been getting this result.
Is there any kind of report or job limit?
I made max records to retrieve unlimited and bumped # of jobs in every server from 5 to 50 and the age of oldest report to retrieve from cache to 0 mins.
Please help!

I'm not sure this is a JAVA problem, but if you're getting an ACCESS_VIOLATION exception from the JVM a method that provides more detailed information is to check for exceptions after every JAVA function called from the native code with (*jenv)->ExceptionCheck(jenv) and if true get information with (*jenv)->ExceptionDescribe(jenv) Making mistakes in native code constructing JAVA objects has been my most frequent cause of ACCESS_VIOLATION exceptions. I hope this helps.

How to Remove a Report Object from a Category Without Deleting It?

I'm trying to "remove" a report object (in this case a Webi Report) from a Personal Category. However, I've found that when I right-click on the report within the Category and choose "Organize >> Delete", not only does it remove the report from the Category, it also deletes the "source" report from it's original location... not good. (NOTE: If I try this as a user without rights to delete report objects, I don't even get the "Organize >> Delete" option, as would be expected based on the behavior I'm seeing.)
Does anyone know if there is a way to "Remove" report objects from Categories without deleting the report from its original location? The only option I can think of is to simply recreate (copy/paste) the whole category with all of its components (less the undesired report object) and then delete the original Category.
Thank,
Josh
Edited by: Josh Crawford on Sep 9, 2010 9:25 AM

Hi,
This is much easier than it looks like, although it's not intuitive.
For example, when some webi is in a category, categories where the webi is linked are underlined in blue:
If you click in those blue marked categories and click Accept, you're unlinking the webi/report/dashboard from that category:
-->
Hope it helps
Alberto

How to use "Another Report Object" in hyperlink

Hi,
I have a requirement to create a hyperlink which will navigate that link to another page of the same report.
When I click on the option "Another Report Object" I get few fields like Object Name and Data Context?
Does anyone has idea how to do this?
Thanks,
Hetal

Hi Hetal,
This feature works only in the HTML Preview or in InfoView.
Here's what you need to do:
1) Copy the field that would be the target (Right click the field > Copy)
2) Right click the field that would act as the source and select Hyperlink
3) Cick on the Paste button which fills in all the required information
Hope this helps!
-Abhilash

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

10g - report object - filename property length limit

I am posting this in the hopes that I can stop someone from beating their head against their desk for a couple of days like I did.
In 10g forms (9.0.4.2.0), for a report object, there seems to be a limit to the length of the filename property - 79 characters. When it hits 80 characters, at runtime I get a "FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration"... error. Clicking the details button will show expanded info indicating a java exception "oracle.forms.net.ConnectionException: Forms session <x> aborted: unable to communicate with runtime process".
It would be nice if help for the filename property could include the length limit.
Gary

Thanks for your attention.
Gary
P.S. Thanks also for your write-up and javabean code on your blog regarding how to open a report in a new window with titlebar, etc disabled. Works like a charm.

How to transport the report object from development clint to quality clint

any body knows different ways of transferring report object from development clint to quality clint.pse send ...

Hi..
LSMW:
There are 2 ways for transporting LSMW data from a system to another.
Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. LSMW -> Extras -> Export project
Transport request with this method, you can transport a LSMW project in full (you can not select the objects you want). With this method, the project will be transported as any other SAP object in a transport order. LSMW -> Extras -> Create change request
Program variants
If you have several program variants in a development system that you want to transport, use the following method to transport them:
Execute program 'RSTRANSP' (via se38) and inform the program and/or variant names (you can transport variant of several programs in one shot).
Layout
In some transactions, one can save layout of the screen (sort, filter, ... criteria).
These layouts can be transported: In the required transaction, when your layouts have been saved, go to Settings -> Layout -> Layout Management. Select the desired layouts and go to Layout -> Transport... There you can add your layouts in existing TO or create a new one.
Database data
In some unusual cases, you might have to transport data of a SAP table.
Go to transaction SE16, select your entries and go to Table entry -> Transport entries. It's only possible for some tables...
If you cannot do it that way,you have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list.
Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TABU
Object name = Name of your table
Double-click on the created line and, depending on your need, put '*' in the key field or double-click on it and select the key you need to transport.
Queries
Queries, datasets and user groups can be exported/imported between the systems using the Program RSAQR3TR.
Report template (ALV variants)
There is a button or somewhere in the menu Change/Select/Save/Manage Layout.
Go to Manage Layout, than Layout menu/ Transport.
SAPSCRIPT Files Transport
Use the program RSTXSCRP to upload and Download the SAPSCRIPT files to different systems
Transport SAPSCRIPT
Use the Program RSWBO052 to create the Transport Request for a SAPSCRIPT, In the Selection screen of the program, give R3TR FORM Give the Form name and press Execute button, it will ask the Development Class and the transport Request No.
Standard texts
Standard texts used in SAPScript(created with transaction SO10) can be included in transport orders. You have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list. Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TEXT
Object name = TEXT,,ST,
Example :
R3TR / TEXT / TEXT,YMM_MEDRUCK_MAIN_16_EC,ST,F
Reward if useful
~Lakshmiraj~

PERFORMANCE of this REPORT object

Hi Experts
I have a REPORT object, having a few SELECT Queries in it. I need to analyze the PERFORMANCE of this REPORT object.
How can I analyze the performance of a SELECT Query alone in it - that is time taken to execute this SELECT Query alone?
How can I find the total execution time taken by the REPORT object?
Plz suggest.
BD

Hi Bobby,
TYPES : BEGIN OF gtyp_rbkp,
          belnr TYPE re_belnr,
          gjahr TYPE gjahr,
          budat TYPE budat,
          usnam TYPE usnam,
          lifnr TYPE lifre,
          ivtyp TYPE ivtyp,
          lieffn TYPE lieffn,
        END OF gtyp_rbkp.
DATA : gt_rbkp TYPE STANDARD TABLE OF gtyp_rbkp,
      gs_rbkp type gtyp_rbkp.
DATA: gv_str_j TYPE i,
gv_end_j TYPE i,
gv_run_time_join TYPE p DECIMALS 2.
constants : lc_a type char1 value 'A'.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-015.
SELECT-OPTIONS : so_belnr FOR gs_rbkp-belnr,
                 so_gjahr FOR gs_rbkp-gjahr NO-EXTENSION NO INTERVALS,
                 so_usnam FOR gs_rbkp-usnam,
                 so_lifnr FOR gs_rbkp-lifnr,
                 so_budat FOR gs_rbkp-budat NO-EXTENSION OBLIGATORY
                                            DEFAULT sy-datum.
SELECTION-SCREEN: END OF BLOCK b1.
start-of-selection.
write: 'testing performance'.
get RUN TIME FIELD gv_str_j.
SELECT belnr
         gjahr
         budat
         usnam
         lifnr
         ivtyp
         lieffn
    FROM rbkp
    INTO TABLE gt_rbkp
    WHERE belnr IN so_belnr
      AND gjahr IN so_gjahr
      AND budat IN so_budat
      AND usnam IN so_usnam
      AND lifnr IN so_lifnr.
IF sy-subrc EQ 0.
**delete entries from GT_RBKP where IVTYP ne A(Invoice from Parking Function)
    DELETE gt_rbkp WHERE ivtyp NE lc_a.
ENDIF.
get RUN TIME FIELD gv_end_j.
Now get the runtime.
gv_run_time_join = ( gv_end_j - gv_str_j ) / 1000000 .
write:/ 'Report RunTime with delete is ', gv_run_time_join, 'seconds'.
clear : gv_str_j, gt_rbkp[], gv_end_j.
Hope this will help you.
Regards,
Phani

Error "Invalid Report Object" when running any CR

Hi, I have installed BO XI V3.1 and upgraded to 1.4 level.
However when logged into the infoview app, if i browse to any 2008 report i have uploaded into the enterprise system and double click to run i get the error "Invalid Report Object".
This is also true if i try to run any report in the Public Folders \ Report Samples folder.
Nothing will display for me but they run fine in CR 2008, just not via the web tool.
Any help on this will be much appreciated.
C.

Hi,
Is this issue after you have upgraded to 1.4 or was this issue occurring before?
Since the reports are running properly in the designer please try to do following steps:-
1) Open the report in the designer which is not working in enterprise
2) Refresh the report in CR designer
3) Save the report back to the enterprise and make sure save with data is checked.
4) Now open the report in the Enterprise and check it works or not.
The reason of doing this is that to generate new PID's for the reports if after the upgrade the PID's have changed or has became corrupt.

How do I publish the latest instance of a report object ?

I have 2 report objects which are scheduled/refreshed daily around 8:00am ish.
History shows a new report instance is successfully created each day.
I have a recurring daily publication which emails them out to dynamic recipients as PDF attachements at approx 8:15am.
Trouble is the attached reports are always the same ie. the 1st/oldest saved instance.
How do I pick up the latest available instance of a report within the publication ?
Note - I am trying to avoid refreshing the reports at publication time because of locking issues.
I am also trying to avoid maintaining 2 separate publications.
Any ideas ?
Thanks
Malcolm.

See if using the id3 property of the Sound class helps you out. There's no guarantee that your sound carries the id3 info you want.

Reports Objects in JDev. 9.0.5.2

How to add 'Reports Objects' to a JDeveloper 9.0.5.2? I want to create a new 'Reports Destination' with this version of JDeveloper.
Exists any add-in to JDeveloper 9.0.5.2 that allow to create Reports Objects?

The Reports Team still didn't release their extension for JDeveloper 9.0.5.2. You might want to try asking this on the reports forum: http://forums.oracle.com/forums/index.jsp?cat=19

JDeveloper 9.0.5.2 and Reports Objects

When do you release the extension of JDeveloper 9.0.5.2 to make Reports Objects (Reports Destination,...)?
I try to make a Reports Destination with JDev 9.0.4.0 and publish to a AS10g (ver. 9.0.4.0.99), but after configuration the web reports application it doesn't start with new configuration.
I put my jar file on
$ORACLE_HOME/reports/jlib
I modify REPORTS_CLASSPATH with Oracle Enterprise Manager Application Server Control
I modify $ORACLE_HOME/reports/conf/server_name.conf file with new destination.
I don't known where is the error.

Hi ,
We are in the process of fixing any issues with JDev 9.0.5 integration. Till then if you just want to create plugin destination (and other plugins like notification etc) you can follow the following steps
SDK - http://otn.oracle.com/products/reports/apis/index.html
Plugin Destination - http://otn.oracle.com/products/reports/apis/plugDestination/index.html
Thanks
Ratheesh

Report Object in Forms5

Can anyone explain how to use a report object which is defined in
the form5 module?
Using the report object node in the object navigator of Forms5, I
created a report file. Now how to execute this report when the
form is running? Is there any command(s) or PL/SQL built-in in
Forms5 to execute this report?
What is the exact purpose of providing this Report object node in
the Forms5 Object Navigator?
Please help. Your guidance is deeply appreciated.
Thanks.
Regards, Dharmesh.
null

This object exisits so you can easly integrate oracle report's reports into your form and run them using the new run_report_object builtin.
You can learn more about oracle reports on otn.oracle.com/products/reports
and you can also read more on the reports and forms integration in that site.

Report Object in Forms 6i

Hi all,
Can anybody please enlighten me about the Report object in the object navigator of Forms 6i. Why that object is present and in what way we can use it effectively.
Thanks in advance
Krishna

This object exisits so you can easly integrate oracle report's reports into your form and run them using the new run_report_object builtin.
You can learn more about oracle reports on otn.oracle.com/products/reports
and you can also read more on the reports and forms integration in that site.

Inter active report objects

i want a beautiful inter active report object based on SD module help me one.

REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
regards
aswin

Report object

Similar Messages

Maybe you are looking for