Report of Capitalization & O&M Material in SAP

Can anyone tell me how can I check the report of capitalized material & other O&m Material in SAP, I have capitalized the material through Internal orders so want to check its report.

Hi Jurgan ,
scenario is like ,
earlier for these material , material record was not existing
but now business want to create material master for such consumable material for tracking purpose
and these codified material is to procured under WBC and profit and loss account G/L not inventory G/L (balance sheet G/l )
and to pick profit loss G/L i made material as valuate material only so that can populate accounting document while transferring value from project to project via KB61N or KB11N
now what value is transferring from project to project that will be picked in terms of quantity (unit value conversion to quantity ) in customized report
hope scenario is clear now ..let me know if any query you have to give your valuable inputs
Thanks

Similar Messages

The standard report for BOMs of a material with a selected period?

Hi Gurus
Is there any standard report for BOMs of a material with a selected period?

Hi,
You will have to develop a report for your requirement,
The following tables will be used for the report
MAST-WERKS
STPO-MATNR
MARA-MAKTX
STPO-BMENG
STPO-POSNR
STPO-IDNRK
STPO-MAKTX
STPO-DATUV
STPO-MENGE
STKO-MEINS
STPO-AVOAU
Regards
Merwyn

Report showing Invoice number, vendor,material and qty

Hi Guys
Is there any report where we can take report for vendor, invoice number, material and qty.
Regards

Dear
yeah! yau can check ME80FN with purchase order history setting.
full marks to me if solved
regdsd
dev...!

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

Creation of Material from SAP VIEW using CDESK.

Hi Experts,
I have one question related to creation of Material from SAP View.
CAD file created say SM1000.prt
Create DIR in CAD View say SM1000
Scenario 1 :   Create Material in Background from CAD VIEW or SAP VIEW from cad desktop, It creates material SM1000
                           in background.
Scenario 2 : Open CDESK ( Transaction)
                        Click on OPEN,
                        Selecting the DIR created SM1000
                        Create the material in background in SAP View, it gives message " enter material number"
Why am not able to create the material from SAP view using CAD Desktop. If any modifications needs to be done in CDESK CUS to solve this please let me know.
Thanks,
Sudharshan

Hi Sudharshan,
maybe the reason for this is that your CAD applications provides a special material number and the customizing in CDESK is defined to use this number. In this case the number or value can by provided from the CAD application only from the CAD View.
In the SAP view the material gets created like in MM01 for example and so mabye you have to enter a material number.
Best regards,
Christoph

Reporting Services of SQL Server 2005 in SAP B1

Hi,
Can I used Reporting Services of SQL Server 2005 in SAP B1? If yes then please guide me how can I do it. If not then is it possible to use these services in 8.8 version?
Regards,
Ghazanfar

Hi Ghazanfar,
The answer is YES. You may check this blog:
/people/community.user/blog/2008/07/04/sql-server-reporting-magic
Thanks,
Gordon

Is there any report On Goods Movement Monitoring in Standard SAP ?

Is there any report On Goods Movement Monitoring in Standard SAP ?
Please send me.

Hi,
You can use MB5B for checking goods movement in a particular plant.
Regards
Noopur

How to freeze the report header row in the web template SAP BI 7.0?

Hello,
Can somebody tell me how to freeze the report header row in the web template SAP BI 7.0 (key fiigures1, 2,3)?
key figure1   key figure2    key figure3
20                    30                   40
30                    80                   90
Thanks

Hi,
You can refer the following threads...
Re: Create Scrollable Table Body in WAD - Locking Table Column and Header
Freeze Data Columns in WAD
This will help you!
Rgds,
Murali

FI Report having the details of Material's Serial Number

HI Experts,
We are looking for a FI Report having the details of Material Serial Number, please let us know if you know any
Your reply will be much appreciated
regards,

IQ09 report you can see the material serial no.
But finance releated report not available. if you want go for ABAP enahancement.

What are the reporting changes in BI 7.0 and sap 3.5

Hi,
what are the reporting changes in BI 7.0 and sap 3.5.
can anybody know the other name of BI 7.0.
what are the min,max no of load times.
what is the load timings if the onsite office is at USA.
Thanks & Regards,
cheta.

Hi Cheta,
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
check these link's
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
In this one - check out slides 28-34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
Check this link to get PDF doc on SAP BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
check the presentaion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
Web Blogs & Threads in SDN
/message/502929#502929 [original link is broken]
/people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
Refer these links
There is lot of Info Reg BI7.0 including Reporting also.
Regards
Karthik

Study Material on SAP CRM fundamental

Dear Friends,
I am Prasad, very new to SAP-CRM, I would appreciate
if there is any study material on SAP-CRM.
my background is : I have SAP-SD experience and 4 full life cycle implementation. and certified.
Thanks for your help and support
Prasad

Hi Prasad
CRM 2.0 IDES version is outdated i rather suggest you to go through with the latest CRM 4.0 it has got more functionalities than CRM 2.0 obviously also decide in which area you need to specialise so got many options like Telesales,Internet sales,Service etc..Also Mr.Michael Van Greet has sent you a link i checked that as well.Its costing you $60 but it seems worth buying it.Because its very difficult to find any books regarding CRM 4.0.If possible try to get it from your colleagues TCRM10-Fundamentals and Base Customising,Middleware and IPC.CR300-Sales and CR-800 Internet Sales.I hope this helps!!
Cheers

Why "All Material in SAP has to be flagged as Inventory Item"?

I am new in the SAP world. Would like to ask a basic question to experts,
Is there anything in SAP that "All Material in SAP has to be flagged as Inventory Item?
Can any body explain what is the problem with Flagging Direct Purchase Items as non inventory item?
Will appreciate.
Thanks
Maruf

Maruf,
Why "All Material in SAP has to be flagged as Inventory Item"?
They don't
Can any body explain what is the problem with Flagging Direct Purchase Items as non inventory item?
There is no problem.
Best Regards,
DB49

Certification Material for SAP MM?

Please suggest me certification Material for SAP MM? If Possible please mail it on "[email protected]".
Thanks....!!!!

Hello Rohit,
You can refer some of the website for getting FAQs.
http://www.onestopsap.com/
http://www.sap-img.com/
http://www.erpgenie.com/
http://searchsap.techtarget.com/general/0,295582,sid21_gci1174396,00.html
Hope this helps.
Cheers !!!
Arif Mansuri

Material on SAP Query

Hi,
I need material on SAP Query (not BW!!).
Can you provide me with a link, or training material?
Thank you.
Tad

You can use simple SAP Querry from SQVI , but it is client dependant and user dependant can not be transportable.
use MARA, MARC,MBEW combination with outer loop option to get maximum results.
Paartha

Re: report for lead time of material

Dear Gurus,
I just want to know is there report to see the lead time of material. Kindly suggest me which is the t-code available
Regards,
Rajashekar

Hi,
You can see the lead time in Report- MCE7 (T Code) for material analysis, here yo will get lead time delivery time of material as per Material group, Vendor,purchase Org. If you want to get material number ,after results displayed choose from menu settings > characteristic display > key & description (or just key) , then
choose from menu settings > column width and extend the length to e.g. 59 (18 material number + space + 40 description)An alternative way is building query taking into consideration Table MARC. Thanking you.

Report of Capitalization & O&M Material in SAP

Similar Messages

Maybe you are looking for