Report of encrypted devices

Hi,
we need a reliable report out of ZENworks (or ZENworks Reporting 5) which shows us which devices are encrypted and which are not. I did not find any report which is giving me the data I am looking for and I dont know how to create this report by myself.
We have one "Disk Encryption Policy" which is deployed device-by-device. If I just take a look at the "Policy Status -> Devices Succeeded" it came out that not all of them are really encrypted with PBA as sometimes it can happen that the encryption-progress just dont start correctly.
Does anyone got a report or another idea for this?
Thanks in advance and kind regards
Sebastian

ccsh2014,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

A report about reachable devices in LMS report tools

Hi all,
is possible to display a report about reachable devices in DCR database? The report about unreachable devices is only in the reports menu in LMS 4.2.4 (Reports > Inventory > Management Status >Unreachable Devices).
I tried to use the report designer, but there is no possibility to create a rule for this report.:-( Similarly I tried to create group devices, but I didn't find some criteria for this type of group. Thanks.
Roman

Hi Roman,
As per my knowledge , there is no such report available in LMS, however I would suggest you to create a POLLER for DEVICE AVAILBLITY to achive your goal.
Go to Monitor > Performance Settings > Setup > Pollers >> click Create Poller.
check the below link for more information:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/mnt-perf.html#wp1542387
Thanks-
Afroz
[Do rate the useful post]

I can not activate my iphone and is reported as "unknown Device" , Please help.

I can not activate my iphone and is reported as "unknown Device" , Please help.
<Personal Information Edited by Host>

Hi Sergius1986,
I'm sorry to hear you are having issues activating your iPhone.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Troubleshooting activation issues
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore.
If you're still experiencing issues, contact your carrier to check for any network or account issues that could cause this issue.
I hope this information helps ....
Have a great day!
- Judy

What is the difference between Hardware Encryption & On-Board Encryption & Device Encryption

Hi
Can anyone explain me, What is the difference between Hardware Encryption & On-Board Encryption & Device Encryption.
Thanks

http://images.apple.com/iphone/business/docs/iOS_Security_Oct12.pdf

LabView / DSC / FieldPoint with Symantec Endpoint Encryption Device Control

I am developing a LabView DSC based control program to communicate with multiple FieldPoint modules (cFP2200/cFP1808) for a client. Their IT department has implemented Symantec Endpoint Encryption Device Control ( http://www.symantec.com/endpoint-encryption-device-control ) and I was wondering if anyone has had experience with this software?
From what I have read and had explained to me, it is much more than an antivirus program. It operates at a very low level within Windows and restricts reading/writing to external devices, USB sticks, network shares, etc. It can also monitor / restrict network traffic and WiFi access.
Thanks,
Steve

Hi MillerMech,
I believe it will cause some errors to be thrown due to its restrictive nature. Symantec has a discussion forum which will most likely be more helpful:
http://www.symantec.com/business/support/index?page=home
Sunaina K.
Product Manager
Embedded Systems

SAP BI reports on mobile devices

Hi experts
We need have some business intelligence (SAP BI) reports and metrics on our mobile devices (BlackBerry, Iphone, Ipad). For example: The mobile'users should enter a product ID and the report show the metrics relate with it availables in SAP BI.
We have BusinessObject products and we know about BOBJ tools to design our solution to mobile devices.
Can we use BO Mobile and BO Explorer simultaneously to show the reports on Blackberry and Mac Devices?
With BOBJ tools can we do a interactive report (to enter product key) ?
Thanks for your help.
Osmy

Hi Osmy,
With the latest BI4.0, you will be able to use BI Reports on Blackberry (and nokia) devices (this was also available in XI3.x releases) . There is no iphone support yet - which maybe coming shortly in later releases.
As for Explorer, i* apps are already available - but not for blackberry as far as i know
You may already be able to run interactive (prompted) reports on blackberry. Below is a link on design best practices for reports on mobile
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_mobile_bi_rep_design_en.pdf
hope this helps,
Shiva

Report on LOST devices

Would like to generate a report on all lost devices (30 days no contact)
I can then use this list to auto retire the lost devices.
Any idea ?
Thanks
Mark

markvh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

ITunes reports "Apple Mobile Device" service error

After much posting and messing around to find a solution to my service crash issues, I have some advice for others to share.
PROBLEM: If you launch "iTunes" and receive a message indicating that: This i<device> cannot be used because the Apple Mobile Device service is not started. The iPod/iPhone will not appear, nor will the system allow you to interact with the device.
CAUSE: There is usually another software installation that is "hooking" into the system and causing issues. These are usually in the form of proxy, firewall, anti-virus, and/or remote control programs.
SOLUTION: Use the "Computer Management" MMC (right-click "My Computer" and select "Manage") to track down the issue. Please do the following:
1) Check the "Services" section. You should see an entry called "Apple Mobile Device". This should be started with a startup value of "Automatic". If the status is "Stopped" (or at least indicates that it is not "Started"), then attempt to start the service. if nothing else, this will tell you if the required binary/executable is located in the correct directory for the service entry. If the service cannot start, or if the service reports that the file is missing, attempt to re-install the "Apple Mobile Device" MSI. Worse case, you may need to uninstall iTunes and re-install.
2) Try crashing the service again. The usual symptoms of this issue are that the service can be started, and will operate fine until iTunes is loaded, at which point the error message appears regarding the service (not being started). If you check the "services" section at this time, you will likely see that the previously running service is now stopped. Doing this will also create a new set of crash events in teh event log. Take note of the time when you "crash" the service and continue to the next step.
3) Check the "Event Viewer" section. locate the time of the service crash. The entries should be listed with a red "X" icon. now look at the event. This should tell you what the "Faulting module name" is. If you are using a proxy application or firewall, you may see something like "FPServiceProvider.dll" (Foxyproxy), "MPFP.dll" (McAfee Firewall), or even a generic entry like "ntdll.dll" (The Windows user environment). In every case (except "ntdll.dll") you swhould be able to search the web for the "DLL" or "EXE" name and work out what application is causing the issue. in the case of "ntdll.dll", you'll need to look for software that hooks into your system. Software like "DyKnow" remote control and other remote administration tools.
If you have installed a remote administration, remote control and/or security suite between a working iTunes and one that crashes, you may want to start with removing those as a test. Once I removed our faulty application (and it's hooks into the OS), iTunes funcationality was fully restored.
This is a "for your information" post. Hopefully it will save the trouble I had to go through to fix this problem.

Thank you so much for this. This was the most helpful advice I could found and seems likely to be applicable to many other people. I had the problem of my iPhone suddenly not being recognized by iTunes and I couldn't figure out why. Although I didn't have exactly the same scenario as the OP, (no actual crash, just an error message from iTunes saying device could not be used because Apple Mobile Device Service was not started) I used the info above to localise the conflicting software (proxy software - doh!). After uninstalling that and rebooting everything is good again. Thanks once more.

WCS 7.0.164.0 Report by vendor (device type)

WCS 7.0.164.0
I have been asked to produce a client’s report that shows all different vendors (devices type). We have about 10000 users in our system on about 3000 APs (light version) I created a client summary report but encountered some limitations:
If I select any time period over 6 hours, I get the message “The report you are trying to generate contains more than the supported number of records (10000). Change the report criteria to generate a report with fewer records”
If I select a time period of 6 hours or less, I get the report including vendor statistics. Is there any way to differentiate within the vendors by device type? For example instead of the vendor apple, get apple-iPhone, apple-iTouch, apple-laptop, etc.
I would like the ability to create my own reports, by I don’t think it is possible on the Version I’m running. All reports can be customized up to a point, but you still get information you might not care for.
Thanks for any information to overcome these issues.
Jorge Jiles.

Hi Jorge,
It looks like such a level of granularity may not be achievable yet.
Should you need such a feature to be evaluated for potentially being included in future software releases, I would recommend to contact your local Cisco account team.
They should be able to follow up and submit a product enhancement request (PER).
Business units will evaluate PERs and, if feasible for the market, they may consider implementing such an enhancement in future versions of the SW/HW.
Regards,
Fede

Custom report and encrypted fields

Hi,
I am writing a report that display all the Database IT resources in OIM system along with their connection URL, there is no input to the report and the output is just the name of the It resource and URL.
The report works fine but the result is encrypted for connection URL, the field is encrypted in the OIM DB but I thought if one use reporting functionality of the OIM the result will be de-encrypted but i guess i was wrong.
Can anyone please suggest how to display such a field unencrypted using reporting interface.
Thanks,

Just wanted to clarify that the field (URL) itself is not defined encrypted in the IT resource parameter definition, only the password field is defined encrypted but when you look inside the OIM DB for all the parameters are in either encrypted or hashed.

Reports 6i Encrypting query string parameters using Web.Show_Document()

I am developing Forms 6i form which initiates a report on our reports server (using rwcgi60) using a call to Web.Show_Document(). However, we pass several parameters to the report from the form which we'd like to encrypt, otherwise they're likely to be abused.
For example, I might have something like:
http://www.myserver.com/dev60cgi/rwcgi60?report=MYREPORT&p_unsecure_param=1234
I am aware of the following document which describes how to use a JavaBean implmentation and client cookie to hide sensitive information using a client side cookie - but this appears to be specific to hiding user logon information - can it be extended to cover any parameter on the query string?
http://www.oracle.com/technology/products/forms/pdf/secure_webshowdoc_rep6i.pdf
...or will I have to provide my own solution - e.g. perhaps using the DBMS_OBFUSCATION encryption and decryption functions to pass an encrypted parameter string to the report, and have the report decrypt the string on the reports server....
I should probably point out that the parameter values are dynamic - not static, so adding an entry to cgicmd.dat isn't going to solve my problem.
Any ideas?
Shane

Frank,
Thanks for confirming this - this is what I had suspected - just wanted to check that there wasn't already some inbuilt functionality which I had overlooked. DBMS_OBFUSCATION_TOOLKIT it is then!
Shane

Reporting on Encrypted Outbound Email

So I'm looking for some assistance with reporting in terms of seeing how much outbound email is sent encrypted using one of our two encryption policies. We use a Content Filter that encrypts off of Keyword in Subject Line and we have a DLP Policy in place that encrypts also.
Is there a way that I could pull this data on a monthly basis per domain?
Just not sure what the best approach would be for this.
Thanks,
Mike

Hello Mike,
I'm sorry but as of now you cannot generate a single report that would reflect this. You can pull the DLP report (for teh DLP policies) and the Content Filters report (to report on the content filters hit) but this would not be an aggregated report here..
Hope this helps.If not, please let us know.
Martin Eppler
Cisco IronPort Customer Support

Reports for Apple devices with SCCM client - Mac Addresses and IP information.

Greetings.
I've been having an interesting problem.
I am currently running SCCM 2012R2 with PKI and have clients installed on windows, linux (ubuntu mostly) and apple computers successfully.
I have created custom report proving me with hardware information for windows and linux machines (Serial numbers, manufacturer, Mac Addresses and IP addresses) successfully.
So far I wasn't able to create any report or even find what table information about Apple computers MAC and IP addresses is stored.
If i go to Apple computer in SCCM using resource explorer under hardware I can see network devices, so that information is definitely gathered by SCCM in some way.
Can anyone help me out with this and maybe I am doing this in a wrong way?

Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
So when I try to get them as substring i get multiple copies of same mac address.
But looks like this will work as solution to this problem.
So far I was doing it this way (And i am sure there is clearer way to do it.)
SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
            FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM v_GS_NETWORK_ADAPTER) t2
            WHERE t2.ResourceID = ResourceID
            ORDER BY t2.ResourceID, t2.MACAddress0
            FOR XML PATH ('')
        ), 2, 100) [MACAddresses]

Emailing SAP standard report using output device ZPDF1

I have two questions regarding the ability to email a standard SAP report.
The user community has been using the action box in tran QM02 to create a corrective action (8D) report. The action box triggers FM QM06_FM_TASK_REQUEST_8DREPORT and QM06_REQUEST_8D_REPORT_STEP2. This process not only creates the report but creates a task in the notification that the report has been generated. The process pops up the PRINT options box to choose various setting including output device. They will then print the report, scan this hardcopy report and email it to the vendor.
We recently showed them a more streamlined process to emailing the report. When the PRINT popup appears, they fill in the output device with ZPDF1 and hit enter. This brings in an email address line that can be filled with the vendors email. By specifying the ZPDF1 output device, the report is generated as a PDF attachment and sent along to the vendor via email.
The two questions I have are:
1. Is there any way to bring over the print parameters needed for the popup screen and eliminate this screen from appearing?
The subject line on the email is populated with the system and spool number even if the title line is filled in on the print popup. Also, the email body has is created with generic text.
2. How can the email subject and body information be changed?
Sorry for the lengthy post but I am not very technical and I wanted to describe the issues as best as possible.
thanks

Hi,
This is possible please configure the Message determination the Output should poin to Outlook
Please take the help of BASIS people to configure this
G.Ganesh Kumar

Report on a devices local security groups

To my knowledge SCCM does not collect any information on a devices local security groups. To support this I have not been able to find anything in the tables/views but there is allot there and I'm hoping I've overlooked it.
I would welcome someone proving me wrong on this. I would like to create a report on a particular missing local security group on our devices.

See
http://mnscug.org/blogs/sherry-kissinger/244-all-members-of-all-local-groups-configmgr-2012
Torsten Meringer | http://www.mssccmfaq.de

Report of encrypted devices

Similar Messages

Maybe you are looking for