Report of full vendor addresses

Is there a standard report that pulls the full vendor address? I checked MKVZ and you can get some of the address but I can't find anything that contains the fields in the ADRC table (things like street 1, 2, 4 or 5 and so forth.)
Thanks!

Hi,
that question should have been opened in
As far as i know there is no direct report for such. Especially for the vendor
You will need to write your own report.
At this stage, either you use direct access to LFA1 (or function module LFA1_READ_SINGLE) and a proper reading of the corresponding address with function module like ADDR_GET_COMPLETE
alternatively, dependign on your release you may think about using WY_LFA1_ARRAY_READ. This is a retail function but it should make the trick !
Best regards
Alain

Similar Messages

Report regarding Vendor Address

Hi All,
Can anyone please let me know how to get a report for Vendor address. Please let me know the T-Code to get the report.
I am using se16n t-code and LFA 1 table name.
Please help me out...
Thanks&Regards,
Lakshmi Battina

Hello,
S_ALR_87012087
or use SAP Query if you have some individual needs.
br erwin

Function module for getting Vendor Address details

Hi,
Im new to this group,and new to ABAP
plz hep me out by solving ABAP Query...
i want to generate a report for getting Vendor Details
like Vendor address,Ph num and Email
input fields are Company code,country key and Account Group.
im Using Smart Forms for this..
but im not getting the Exact Function module to get All Required Details..
regards
Smitha

thanks for ur quick reply...
SELECT SINGLE LIFNR
FROM LFB1
INTO V_LIFNR
WHERE BUKRS EQ V_BUKRS.
CALL FUNCTION 'VENDOR_READ'
    EXPORTING
      i_bukrs         = V_BUKRS
      i_lifnr         = V_LIFNR
    EXCEPTIONS
     NOT_FOUND       = 1
     OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the code i have written...
but my problem is there no table in the Function module....
for Example...
CALL FUNCTION 'QPAX_PLMKB_READ_FROM_PLKO'
    EXPORTING
      i_plnty            = 'Q'
      i_plnnr            = V_PLNNR
      I_PLNAL            = V_PLNAL
      i_sttag            = V_DATUV
   TABLES
    T_PLMKB_TAB        = IT_TAB
i want the function modules with tables and proper input...

How to remove vendor address from T. Code S_ALR_87012103 - List of Vendor

Hi Guru's
There is one report called S_ALR_87012103 - List of Vendor Line Items, after executing this report it will give Vendors line item with vendors name & address with it.
But I dont want to show the address of the vendors address in the out put?
How can one remove this?
Please help me.
Thanks & Regds,
Santosh Rothe

Hii
need to go for ABAPER help...
or else u can try out by changing the layout try if it works
sejal

Vendor address not updated in Scheduling Agreement

I have a peculiar problem where the vendor address is not being updated in all scheduling agreements. I have multiple SAs against a vendor. When i change the name of the vendor, the name changes only in one of the SA. All the remaining SA carry the old name of the vendor. I tested with another vendor on the test system and the names on all the agreements change as soon as I make the change in the vendor master.
Does anyone have any explanation on why the system is behaving strangely?
Thanks

Hi,
I am more surprised that the name changed automatically on the ones that DID change.
I would not have expected this to update in this way. The main idea is that outline agrements can have different data to the master records because they are specific agreements and often relate to very specific data.
If you wanted to change the address of a vendor it should NOT change the address of existinmg VSAs etc. automatically because the document is a =fixed contract that is agreed between you and the vendor and should ONLY be changed manually.
We had a similar question earlier today asking why the system does not change the short description on a contract when the short description on the material master changes. My reply was basically the same, it SHOULDN'T change it automatically because the agreement is a legal document and cannot be changed by just ONE of the parties involved.
So I would be asking why the one VSA changed automatically (and the ones in the test syste) not why the others didn't change.
Just trying to lok at this from all angles.
Steve B

Report to view vendor payment status

Dear GURUS
Is there any Report to view vendor payment status against purchase order.
Please give me transaction code if any.
SANTOSH KADAM

check report
FBL1N
u will get the report u can creat ur own lay out also to satisfy u r need
hope this helps

Reports to display vendor open items by payment methods

Hi Gurus,
Is there any reports to display vendor open items by payment methods?
Thanks i

Hi,
Use FBl1N or F.41
Goto Dynamic selections, Select payment method give that and execute. It will give you the report payment methd wise.
Regards,
Radhika.

Report for inactive vendors from past 2 years

Hi,
We have a request to create a report for the vendors who are not active for last 2 years. Can anyone please advise me the points I should keep in mind to consider a particular vendor inactive. eg. if a vendor has 0 balance in table LFC1 for last 2 years, will be considered as inactive but, that vendor could have some PO's activity on it in these 2 years, which are not appearing on FI side.
Please also tell me if there is a table to find open and close POs for vendors for last 2 years.
If anyone please advise, the points to keep in mind and important tables to refer for create this report.
Quick response will be appreciated.
Thanks & Regards

Hi,
Thanks for your prompt reply, Can you please tell me where is the parameter SALDO0 in report RFKSLD00.
Quick response will be appreciated.
Thanks & Regards

I Need Interactive Report for displaying vendor information. Based on the s

Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.

hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b>

ALE: how do I use dependent distribution for customer and vendor addresses?

Hello SDN'ers
Hopefully someone can help me with an ALE question.
We have two ERP systems connected with ERP - Retail and AFS.
Customers and Vendors may be created in Retail, and are distributed to AFS using DEBMAS, CREMAS and ADRMAS messages.
Not all customers and vendors are required in AFS, so we have various filters set up in the Retail distribution model (BD64).
However with the filters in place, addresses were still being distributed for customers and vendors that had been filtered out.
To try and avoid this for vendors, we created a filter group for AddressOrg.SaveReplica in receiver determination. In the filter group we selected Dependent Distribution for CREMAS (Address owner object).
This works perfectly for vendors - vendor addresses are now only distributed if the vendor itself is distributed.
However I've now discovered it is preventing any customer addresses from being sent! I was surprised about this: I expected CREMAS dependency to only affect vendor addresses. Can someone tell me:
- is this how dependent distribution is designed to work? In which case can anyone offer any suffestions to achieve the filtering some other way?
- or are we doing something wrong to be getting this result?
Thanks for any help!
regards, Roger

Hi all,
as Robert suggested, I've written an exit to get round this, although I'm surprised I should need to!
What I did was to code an enhancement in function group BDBF, at the start of subroutine COMPUTE_LOGIC_EXPRESSION.
* In the case of addresses, dependencies should only be applied for the appropriate type of address
data: lwa_tbd14 type tbd14.
if P_MODEL_DATA-FTYPE = C_FTYPE_DEPENDENCY_FROM_MESTYP.
*   Dependency from Message Type.
*   Read the Address Object type
    READ TABLE P_FILTER_VALUES
                     WITH KEY OBJTYPE = 'AD_OBJTYPE'
                     BINARY SEARCH.
    if sy-subrc = 0.
*     Check if the Message Type is linked to the Address Owner Object Type
*     (Table is buffered on DB)
      select single *
        from TBD14
        into lwa_tbd14
       where MESTYP = P_MODEL_DATA-FMESTYP
         and OBJTYP = P_FILTER_VALUES-OBJVALUE.
      if sy-subrc <> 0.
*       Wrong type of address for this dependency - stop here
        P_REPLICATE = c_true.
        exit.
      else.
*       Correct address type. Standard processing continues, checking any
*       filter values set up against the Address Owner Object Type.
      endif.
    else.
*     It isn't an address - continue with standard processing
    endif.
endif.
Let me know if this helps you, or if you know of a better way to achieve the same result.
Roger

"Error in Process" for POs after changing Tax codes and Vendor address

All,
We are in extended classic scenario and we have 2 POs with status "Error in Process"
PO 1:
The PO was ordered with 3 line items, Confirmed, Inovoiced. Later our accoutnig team realized there should not be tax for one of the line item in the PO. So they created Credit memo and asked our purchasing dept. to change PO from Taxable to Tax except.
Now the porblem is, when PO chages to tax except in SRM, it is going to "Error in Process".
What could be the reason?
PO 2:
The PO have 10 line items and Confirmed, No invoice is generated.
Now the Purchsing want to change vendor address in the PO, they changed the vendor address in the PO.
Now the porblem is, when PO changes in SRM, it is going to "Error in Process".
I checked the RZ20 Traansaction in SRM, both POs have same errors:
Backend application errors "Indicator for GR-based invoice verification used not allowed"*
We removed 'Confirm Performance of Service/Goods Receipt' tick mark for the PO in SRM under follow on documents and it is throwing error saying it must be checked.
Did any one got this error, what i need to check for this errors?. any help?
Thanks
Rams

Hi,
Once the PO is created . Confirmation made and invoice .Tax change will not be allowed.
First reverse the Invoice.
Cancel the confirmation
then change in the P.O
Do the Confirmation and invoice it will allow
Regards
G.Ganesh Kumar

Vendor address not appearing in PO

Hi All,
For particular vendor address is not appearing in PO preview and printout.
Partner function (VN,OA,PI & CR) also maintained in vendor master against this vendor code.
Also checked the SPRO(partner determination) settings ,found everything is maintained correctly.
I anaysed, if you put manually the vendor code and particular purchase organisation in PO and hit enter, maintained partner functions are appearing in partners tab in PO.
When vendor code and purchase organisation are automatically picked up from purchase requisition, partner functions are not appearing in partners tab in PO. (default only VN is appearing.Other functions OA,PI & CR are not appearing)
I did not understand,why these functions are not coming.
*The same vendor code with other purchase organisation is working correctly.
Kindly help me on this issue.
Regards
Sam
Edited by: samraj444 on Apr 15, 2010 11:23 AM

Dear All,
Now this issue has been idendified and rectified with the help of abaper.
Thanks for your valuable reply.
Regards
Sam

Vendor Address not displayed in Payment list RFZALI20 (F110)

Dear All,
One country users are not able to see the vendor address/bank details in payment list RFZALI20 in F110 transaction. However, this information is displayed when I run the payment list as shown below:
I could find that this information is controlled by the field "Max No. of lines for Address" field on selection screen of program RFZALI20. If I set it to 0, these details disappear for me as well.
User is running the program with a variant which uses 5 No. of lines for address but still doesn't see these details.
Any inputs on the matter will be greatly appreciated.
Thanks & Regards,
Vishal Ahuja
P.S. : I already checked for authorization by creating a test user(with same parameters) copying users' ID in production but issue could not be replicated.

Hi,
which output type u used for print preview? is it NEU?
Regards,
Pavan

Vendor Address not getting printed properly in cheque printing.

Hi
While printing the vendor address for the cheque printing, for certain vendors the street no. is not getting printed & for certain vendors PO Box is not getting printed.
In the program we are fetching vendor address from REGUH table & then passing onto the global variables which are being used in the script & data is there in the database table for both street & PO Box number.
The code in the script is as follows:
/:           ADDRESS PARAGRAPH UH TYPE '3'
/:             TITLE    &W_ANRED&
/:             NAME     &W_ZNAME1&,&W_ZNAME2&,&W_ZNAME3&,&W_ZNAME4&
/:             STREET   &W_ZSTRA&
/:             POBOX    &W_ZPFAC& CODE &W_ZPST2& CITY &W_ZPFOR&
/:             POSTCODE &W_ZPSTL&
/:             CITY     &W_ZORT1(28)&
/:             COUNTRY &W_ZLAND&
/:             FROMCOUNTRY &W_LAND1&
/:             ADDRESSNUMBER &W_ZADNR&
/:           ENDADDRESS
Can anyone please let me know, what could be the possible reason for this?

you can tyr with TYPE '1' or TYPE '2'
: ADDRESS PARAGRAPH UH TYPE '3'

Vendor address not displayed fully in ME23n

Hi All,
The vendor address in ME23n is not displayed fully during print preview. May I know the cause for this problem and how can I correct it.
Thanks and Regards,
John

Hi,
which output type u used for print preview? is it NEU?
Regards,
Pavan

Report of full vendor addresses

Similar Messages

Maybe you are looking for