Report of posted Deprecation with ASSET CLASS

Hi Gurus,
We require a depreciation simuation report with Asset class as mandatory one.
Could you please tell me path and t-code for the above said report.
Regards,
Praveen.

Hi Praveen,
You mentined before you wanted to view depreciation simulation, for this RASIMU02 is the report to use.
However, if you want to see depreciation planned /and or posted you can use the Asset Balance RABEST_ALV01. If you click on the indicator  "current book value" you will see the actually posted depreciation and current Netbook Value. Also in this report you can enter the Asset Class in the selection parameters.
Regarding viewing the note I forwarded to you previously: you can view it via the SAP Portal - http://help.sap.com/. If you go to SAP ERP tab, you will see on the right hand side pannel a link to SAP Notes. Here you can view any note.
I hope this helps further.
Kind regards,
Brigitte

Similar Messages

  • Report for equipment list with asset number

    Hi
    I want report where i can get equipment number with asset number. I hecked information system. But id din't got

    Follow these steps in the IH08 ALV screen (Output)
    - Press Ctrl+F8
    - In the pop-up, select Asset field from the Right hand side menu (Column Set) and bring it to Left hand side menu (Displyed Columns) by clicking on the arrow towards left.
    - Arrange the position of the field Asset next to the Equipment field (as you desire) by upward/downward arrows.
    - Press Enter
    Now your Asset column is seen at the place you have arranged.
    Regards
    Jogeswara Rao

  • Problem with asset class

    Dear Experts:
                           I have a query.Its regarding Asset master data. When i open an asset in class of Motor vehicle, in input data i also input Quantity (mostly 1) But after creation asset master data of the asset created shows its quantity as 3. Please note that i do not use any reference while creating it. Please guide what possible problem can be.
    Regards

    Hi,
    As per the SAP standard setting, we are not suppose to enter the quantity value in the qty field at the time of asset master creation.
    Since qty value will be updated automatically while doing MIGO / F-90 only.
    If you enter 1 earlier, then if you do MIGO / F-90 or 1 qty, then after posting of your acq entry, your asset will have 2 qty altogether. Prerequisite for this is that,  the unit of measure in asset master and purchase order should match.
    Coming to your issue, please make sure that, you have not posted any MIGO / F-90 entries to those 2 questioned assets.
    Please check.
    Regards,
    Srinu

  • Report: Statistical WBS elements with assets assigned to them - actual cost

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Hi
    There is not a standard report which can cater to your requirements. You need to develop one.
    You can take the refernece from CNS41 report for development. Some of the fields you need are PRPS-XSTAT for statistical WBS and will have to use tables ANLA and ANLC to fetch asset master data.
    Regards

  • Posting parameters with Webservice class

    HI,
    I'm trying to use the mx.services.webservice class to
    interrogate and use my .net services. Everything seems to work as
    documented with the exception of passing parameters. There is
    little documentation on how to pass parameters, but a few examples
    seem to indicate passing an ordered list as parameters to the
    method name. So my web service - GetTableOfContents expects a
    string parameter - SectionName. I assumed
    WS.GetTableOfContents("TheSectionName") would
    accomplish this, but on inspection of the request xml
    TheSectionName is not included in the xml. Below I've attached the
    webservices debug/info output so you can see what I mean. Note at
    the end the trace of the xml the webservice class builds for the
    request and note the request bit -
    <request><SectionName
    /></request> with a blank parameter tag.
    The parameter is being interpreted in some way by the
    webservices class as you can see at 2/4 10:34:7 SOAP : parameter -
    value - MySectionName, but it's not being in cluded in the xml
    immediately after. Anyone seen this behaviour and know what might
    be going wrong?

    Thankyou very much for your reply, Eric (both here and in the web services forum).
    The way I generate the web service is just to right click on the java file and say 'generate web service'. I can't seem to get at the code that is generated, but it appears that there is nothing in there that I can change to rename the classes.
    I may just live with it and refactor the existing client code to match the class names that are given.
    Tim

  • Depreciation Posting for Asset Class

    Hi SAP Guru's
    While running depreciation through AFAB, i am not able to post the depreciation for 17 & 18  classes of assets (for April'08), and it is posting for remainig assets classes.
    it showing an Error Message as follows
    Message(s) when checking document ERROR00001
    Message no. AAPO511
    Diagnosis
    Messages were issued when document ERROR00001 was checked. The related lines in the error list are from 1 to 579.
    The next lines in the error log provide more information on the errors that occurred, or information or warnings that were issued.
    *System response*
    *Information messages are intended to give the user information on certain actions of the program during document creation.*
    *Serious errors during processing can prevent the document from being posted. However, in that case the system still continues to process other documents.*
    *Procedure*
    *Information messages do not cause processing to terminate. No further action is required.*
    *For serious errors that cause processing to terminate, try to find the cause of the error. After you correct the error, you have to restart the posting program.*
    please give me an immediate solution .
    Kind regards
    Praveen Kumar

    Hi Praveen,
    Your not mentioned which version followed by you Either ECC 6.0 or 4.7.
    If your following ECC 6.0 version Here you can deselect the external check box for document type AF. (OBA7)
    Then you can execute depreciation under TC AFAB .
    You can see the planned or unplanned depreciation.
    The Above information it might be resolved your issue.
    Thanks
    Venkatesh
    Thanks,
    Cheers,
    Venkatesh
    Edited by: vdd08381 on Oct 17, 2011 5:19 PM

  • Asset Settlement You cannot use this transaction type to post to this asset

    Hi All,
    A CAPEX is created. An Asset is created. The asset is assigned to CAPEX under settlement rule. Out of several purchases made against the CAPEX, settlement for 2 months are carried out and the value of CAPEX was transferred to Asset.
    However, during the current month, while doing the settlement, the system is giving the following error :-
    "You cannot use this transaction type to post to this asset"
    Message no. AA 834
    The details diagnosis of the error message is
    "The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class PM-501 (chart of depreciation DEIL). You cannot post to this asset class using the transaction type entered"
    Request to please let me know what could be the possible reasons for system giving such message adn how to rectify it.
    Regards
    Santosh

    Hi Santosh,
    I would suggest that you Check the <b>asset number</b> you entered. You may want to allow posting to this asset class using this transaction type group. If this is not the case, then, you may have to ask the business to reverse the initial posting causing this error and re-post with the correct transaction type that is allowed for this asset class.
    I hope the above helps.
    Do not forget to award the points please.
    Regards,
    Jacob

  • Wrong assignment of Balance sheet accounts for Asset Classes...

    dear all,
    there is wrongly assignment of acquisition balance sheet account in asset class in t code is AO85 that is, Acquisition:Acquis. and production costs an Accumulated Depreciation Balance sheet account have been assigned. Also in t code  AO93 for ordinary depreciation same correct accumulated depreciation Balance sheet account have been assigned.
    Now i can say that Acquisition balance sheet account and accumulated depreciation balance sheet account are assigned with same GL (i.e. accumulated depreciation account). 
    The transactions data have been posted for the asset class with different tcodes i.e. 
    ABAVN Enter asset transaction: Asset Retirement
    OASV Enter Transfer Posting
    AIBU   AUC Settlement
    ABUM Enter asset transaction: Transfer in company code
    AB08 Documents from asset
    I wanted to post transaction data with correct acquisition account. What should i do to correct posted transactions..
    Waiting for positive response.
    regards
    saqib usman

    The best way is to create a new asset class and to transfer the existing assets.
    An other option is to change the G/l account in the development system and transport to production. In development it is only possible to this when there are no posting in this asset class. When there are posting you have the option to reset in development asset accounting. Then you can change the G/L account. Have a look to SAP-notes with your error there is a note for.
    When the changes are in production you can make a manual correction with the transaction ABF1 (SAP note 69225).
    With this option you have the problem that the original postings are no longer in line with the asset account assignment. When you want to do a currency conversion in the future you have to make correction posting again in the old fiscal year

  • Depreciation area set in Asset Class does not appear in asset master data

    Depreciation area does not appear in the asset master data however it is set in the Asset class. If other asset is created in the same Asset class that depreciation area is automatically set  in the asset master (it proofs that it is not a problem with Asset class).
    I tried to set that deprecition area directly in the asset master data but all the fields are blocked for changing (is it possible to change that?).
    What should I do as I need to post on that area ?
    Thank you,
    Jean

    Ok Zaid!  thanks,
    But what treatment should I give to that asset? Because now it is not being evaluated in that area but we need to do it.
    The asset was created in the prior exercise (year).
    Regards,
    Jean

  • Asset Evaluation Group Link to Asset Class

    Hi
    I have a requirement of Linking Asset Evalaution Group with Asset Class.
    For Exapmpe;
    Assetc Class is                Vehicle
    Evaluation group 1            Light, Heavy Medium
    Evaluation Group2             Two, Four,
    Etc.
    At the time of Master creation, Under allocation Tab, i am getting all evaluation groups, I mean, in 1st Group i have more than 50 entries.
    Now the requirement is to get the evaluation group based on the Asset class.
    I do understand, evaluation group creation time,. we don't have option to link with Asset Class.
    Also, there is an option to default Evaluation group for Classes.
    But our requirement is to get filter based on Class, so that at the time of mater data creation, to avoid mistakes..
    Can we meet this requirement ??
    Thanks in advance
    Shinas

    Hi Ajay,
    Thanks for the response..
    You are right, Validation is the only Option.
    But i have lots of evaluation group in each category.
    I dont think client is going to accept it...
    how about AIST0002
    Can we do something on this...

  • Checking balances with asset register and Trial balance

    Hi ,
    Need to develop a report for checking balance with asset register  and Trial balance. Now asset balances and TB is not matching. We need report at Plant level. pls suggest
    Regards

    Hi,
    In the most reports you can select current book value (you first have to select ALL SELSECTIONS)
    These values are the same as on FI on your G/L accounts

  • Asset class Reports and the G/L accounts balances are not tallying

    Hi
    As per the G/L account (Recon) Furniture is showing 952428.18 and the furniture asset class report is showing 916186.25.
    Kindly tell me how to reconcile, the way to find out the differences.
    With regars
    Siva

    Hi
    As per the suggestions given i verified
    1. Asset transactions might have posted after posting depreciation for the period
    I verified this. there are no postings
    2. Depreciation terms (depreciation key, useful life ) might have changed.
    The depreciation terms are not changed
    3, Manual transactions might have posted directly to GL Accounts.
    No manual transactions are there.
    Correct the differences by
    1. Repeat the depreciation posting program (AFAB)
    2. Execute Recalculate (AFAR) and Repeat the depreciation posting program.
    I executed AFAR it is updating the G/L accounts only not the FI-AA
    3. Check the Manual entries posted in GL Account of Furniture asset class and reverse
    manual entries are not posted.
    I executed ABST. There are no errors.
    i verified the SAP Note. it is basically explaining about AUC(We don't have) reconciliation and this is the first year (3months completed after go-live)
    any other possible reconciliation is appreciable
    with regards
    Siva

  • Report - asset balances by asset class

    dear all ;
    when i run report asset balances by asset class (S_ALR_87011946) , it tips error message "fiscal year change not yet made for company code1000"
    what's wrong with it ,how can i do ?
    thanks.

    Hi
    if you want close posting period you have post depreiciation completely then only system will allow close posting period
    Thanks & regards
    Phaneendra

  • Diff. GL balance (FBL3N) with asset report (s_alr_87011963).

    Dear Experts,
    There is a certain asset class (Computer) which is not tally to the GL balance. What is the possible reason to check?
    I am verifying the GL balance (FBL3N) with asset report (s_alr_87011963).  please refer below table.
                               furniture
    Particulars
    2014
    As per F.01 (BS)
               1,098,675.23
    As per Report S_ALR_87011963
               1,097,045.98
    Furniture
               1,098,675.23
    Difference
                     (1,629.25)
    Please help me to resolve this difference issue.
    Thanks in Advance.

    Thanks for your valuable reply,
    i have found two line items in GL balance that are not showing in asset report (which is difference amt Rs. 1629).
    The document Type is "AA" of below entries.
    1. Vat retention @4% for Rs. 1000/-
              asset ac  - Dr             1000
                    Input vat capital Cr -
    2. Vat retention @4% for Rs. 629/-
              asset ac  - Dr             629
                    Input vat capital Cr -
    Report is showing all documents(entries) of Doc type "AA"

  • Asset Report by Location wise with address & other details

    Hi,
    Can any one guide me any reports are available for Asset Report by location wise, address and
    other details.
    Thanks in advance.
    Regards,
    GB

    Hi Govind,
    I have solution for your requirement.
    Go to Tcode OAVI
    Create new entries.
    Difine a name for the sort version and enter description for the same.
    Choose fields for display in standard SAP asset reports.
    For your case enter table name ANLAV field names MENGE, STORT, and KOSTL. etc
    Here you can choose various other fields also.
    Then use this sort version while runnnig the SAP standard asset reports.
    By using this sort version you can able to to see the quantity, location and cost center fields available during any any asset balances report. So take a printout of the asset balances report S_ALR_87011964 - Asset Balances by Asset Class along with the above fields and go for physical verification
    Note: This development you can directly do it in your production system
    This will defenetely fix your requirement.
    Add Point*s, if problem resolved.
    Thanks,
    Srinu

Maybe you are looking for