Report of Seniority employee

Is there a report standard that permit get the seniority in year, month, day, or i have that do a report of customer?
Regards,
Wilman

Good Morning,
I have the following issue,
At the moment of the output of informacion of the Seniority employee ,
the system in the adhoc query display the field days with 00.
The information of the field days, months, years, I'm getting from the
fields of the infotype 0000(Additional fields):
Length of Service (Number of Days)
Employment Period (Number of Months)
Length of Employment Period (Number of Year)
Regards,

Similar Messages

Calling infotype 0002 in ALV report for showing employee photo

Hi all,
The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
Thaks.
JAY

Hi Jay,
It is possible. Please refer the syntax for the CALL TRANSACTION
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                    | [USING bdc_tab [bdc_options]] }.
You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
For example, I just had a solution to go to the roles tab in the user profile and I did as below:
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0050'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_CURSOR'.
    wa_bdcdata-fval   = 'USR02-BNAME'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'USR02-BNAME'.
    wa_bdcdata-fval   = g_value.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = 'SHOW'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0100'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = '=ACTG'.
    APPEND wa_bdcdata TO it_bdcdata.
    g_opt-dismode = 'E'.
    g_opt-defsize = k_ok.
*** if user click on the User Name, call SU01
    CALL TRANSACTION 'SU01' USING it_bdcdata
                OPTIONS FROM g_opt.
Regards,
Selva K.

MSS reports launch pad - Employee selection

Hi,
I have configured the reporting launch pad and I can run a report on MSS launch pad. I am on ECC 6 ehp 4.
When manager runs a report, he can not select employees and then run a report.
In the ITS version of report launchpad, manager could select an employee or set of employees reporting to him and then run a report for selected employees. I want to use similar functionality in ECC6 ehp4.
The Reporting launchpad does not allow me to select an employee and then run a report. Is there any configuration for this or the new reporting launch pad does not support this functionality?
Many Thanks
Ashutosh

Hi,
I have configured the reporting launch pad and I can run a report on MSS launch pad. I am on ECC 6 ehp 4.
When manager runs a report, he can not select employees and then run a report.
In the ITS version of report launchpad, manager could select an employee or set of employees reporting to him and then run a report for selected employees. I want to use similar functionality in ECC6 ehp4.
The Reporting launchpad does not allow me to select an employee and then run a report. Is there any configuration for this or the new reporting launch pad does not support this functionality?
Many Thanks
Ashutosh

Please could anybody has a sol, to bring images to the report for all employees which has no reference with images stored in some path

Hi Obiee experts,
I have placed the images in below locations and these images are independent and has no reference to the employee id column in dimension table.but my client requires report with all the employees,with respect to the images.Could anybody can give me a solution for this.
    1) root: \apps\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
   2) root: \apps\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
   3) root: \apps\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes
Thanks in Advance
kumar

Hi Sreeni,
The images are stored with employee ids reference like 1234.jpg in the image location path, so will it be possible to call those images into the report with no relation at database level.
as you said in above mail even if if we cld try to store the images in oracle database with format like CLOB format the rpd will not support the datatype to bring to that report level.
Please let me know if you have any solution
Thanks in Advance
kumar

Report to find employees hired in HR

Hi All,
Do u have any report in HR to find how many employees have been hired?

check the tcode PAR2
let me know if there is anyhting else
Edited by: Sikindar on Dec 8, 2008 10:28 AM
Edited by: Sikindar on Dec 8, 2008 10:55 AM

Customer Report with Sales Employee and Due date

Hi,
I need to configure a report for Customers with Sales Employee & Due date.is there any standard report for this combination in SAP or Do i need to Configure separate report for this.If i need to configure this -kindly help me with some guide lines to prepare this.It would be a great help if you provide some steps to configure this Report.
Thanks in advance
Suvarna

Have you tried the txn code MC-Q or the report program RMCV0500.

Customised Garnishment Report missing few employees

Hey guys...
Am caught up with this issue. A customised Garnishment report that run every pay period (bi weekly) fails to pick up few employees. The processing has happened and the checks have been printed. But the employees do not appear on the report.
Moreover, the same employee is found against the same vendor account for a different period, but gets dropped of for another period.
Any thought son what I need to check?

Please check if employee is active now or garnishment is displayed in GRDOC/GRORD tables ....not sure may be because of some conditions imposed in custom interface to not display I guess.
Please check with developer on rules set in interface.
Thanks,
Ameet

Report RPUFIXDS deleting employee data

Dear Experts,
I have a scenario wherein the report RPUFIXDS is deleting data for employees linked to the same CP.
As per the standard documentation,
Personnel numbers 1 and 2 have Molga 10 (USA) and belong to the same person (CP). Therefore, certain infotypes (0002, 0006, 0009) are grouped for these personnel numbers. If data exists in these infotypes for pernr 1 but not for pernr 2, there is an inconsistency. This inconsistency is repaired by report RPUFIXDS as follows:
1. If the personnel numbers are repaired in the sequence 1, 2, the data from the grouped infotypes of pernr 1 is copied to the grouped infotypes of pernr 2.
2. If the personnel numbers are repaired in the sequence 2, 1, the grouped infotypes of pernr 1 are deleted.
My scenario involves a personnel being converted from a contractor to an employee wherein the contractor and employee assignments are separate, within the same country and are linked to each other via the same CP. When I try to process employee pernr which has IT0002, IT0006 and IT0009 data maintained, through the report, it should, as per the above logic, update the contractor pernr with the relevant data for the grouped infotypes. However, the report deletes the data in IT0002, IT0006 and IT0009 for the employee pernr instead of updating the contractor pernr details. I've observed many such cases wherein data is being deleted when it should actually be updated as per report logic.
I have checked the standard documentation thoroughly and notes 783499, 1822293 and 1447867 and was unable to find any information pertaining to my case.
I would be very greatful if you could shed some light on this scenario and the behaviour of the report herein.
Thank you,
Mayank

The note given by stuart will explain this in detail to add further, Please read the reports documentation in Se38, as it does list why it deletes the data and its no way knowing in report output to prevent BADI needs to be implemented mentioned again in reports doc check here http://scn.sap.com/thread/3326684 - recommend solution is to implement a customer-own BADI implementation of BADI HRPA_SHARING_REPOR in order to determine the correct repair sequence (i.e. determine the leading PERNR with consistent data) and to avoid that a PERNR without data is chosen as leading PERNR You can use the BADI HRPA_SHARING_REPOR to change the sequence of personnel numbers that should be repaired by the report, ie give the preference to the contractors, we had a similar issue and did it by ordering them correctly. Hope it helps/

Report of the employees with no photo

Dear friends
We have uploaded some employees photos only, I want to know the list of employees whos photos are not uploaded in the R/3, please let me know how to take a report the employee wth no photo uploaded
Regards
Kiran

Hi Kiran,
Run report OAADMILI via SE38 for the relevant content repository.
There restrict the output to PREL object.
There you'll see all the personnel numbers who have a photo in the SAP Object ID column (along with the infotype number e.g. XXXXXXXXYYYY where XXXXXXXX is the personnel number and YYYY is the infotype)
Then you can get the list of all the employees via Employee List.
Then you can make a comparison between two lists via Excel's VLookup functionality -or any other way-
Regards,
Dilek

Report to the employee list under an org unit for a specific PSA

Hello Experts,
Is there any standard report to see the list of employees belonging to a particular sub org unit under a particular personnel sub area?
For eg: There is a company X, and it has got 3 plants in blore, mumbai and chennai.
Blore , chennai amd mumbai represent the personnel sub area for the company X.
to see the list of employees working under operational sub org unit , under the org unit of company X in blore, is there any standard report in SAP??
Helpful answers will be awarded
thanks and regards,
Pooja Dev

Hi Pooja,
Use Report RPLMIT00.
Choose Org structure on it.
Let me know.
Arti

Bookings Per Participant Report - Need Active Employees Only

When I run the standard Bookings Per Participant LSO_RHXBUCH0 report, it gives me everyone who ever completed the selected Course or Course Type within the search parameters (completion within a date range, for a specific organizational unit, etc.). I need to get the report to find only employees who are currently Active, but have not been able to do so. The Selection options screen with the status field seems to only allow limiting the Planning status of objects like the org unit or course type, but not the employee's status.
Does anyone know of any course history report by participant in SAP that will allow me to specify the report should show only Active employees in the results?
Thank you.

I had to get ABAP to add custom checkboxes with filters for Active, Inactive and Terminated employees. It needed to be done at the programming level. No points for anyone but me on this one.

Flexible employee report - too many employees in output

Hi,
We are running on ECC 6. while running flexible employee report (t-code S_AHR_61016362 ) using the organizational structure button on selection screen too many employees are getting selected.
When I select a single org.unit and not the underlying ones, the employees from underlying org.units are also being displayed in the output.
I tried searching for an SAP note but invain. Appreciate your help.
Thanks for your time,
Kumar.

Hi Kumar,
perhaps you could use S_AHR_61016533 instead. There you coudl change the
Evaluation Path to select the persons.
Regards
Bernd

Delivers iBots - one report run individual employees activities

Hi I am trying to setup an iBot to do the following.
We have a report that runs all employees activities that are to do or overdue. This is prompted on a dashboard at team level.
We want to "cache" the report on a morning so it runs quickly. Is there a way for iBots to run all the employees names beginning with "a", then "b" then "c" by using one report. When we run everything it fails due to a cube generation error as the pivot can't hold all the informaton in one go.
Currently we have had to create about 15 reports that run "a" to "g" employees etc. Then create 15 iBots to run them.

Hi,
You should post as "Write document" or "Write a blog post" option not as discussion.
Thanks & Regards,
Nagarajan

Standard report excludes an employee without processing

Hi all,
I've a scenario where a standard report doesnt include a person in the process and processes for the rest of the employees. The concerned employee has all the payroll results and inspite of that he doesnt get processed.
I've been working in Great Britan payroll. I've need to include an employee in EOY reports (end of year reports) where various forms like P14, P35 (just like form 16 in indian context) etc gets generated.
The log displays that employee is selected but timeframes are rejected. what should i do ?

hi
check these links
Rebate
Rebate Agreement
Rebate agreement in SAP -SD
regards
ankit

Reported by and employee responsible is taking the same user

Hi all,
*While creating a new issue from solution_manager through a user consultant1 ,ReportedBy is coming consultant1 but Employee Responsible is also coming consultant1,but it shud be empty. How to make Employee responsible field empty.*
I'm automatically getting the employee responsible same as reported by.
function category of reported by is 'contact person' and that of empolyee responsbble is 'person responsible'.

Dhiraj,
Check the access sequence assigned for the Partner function in the determination procedure, Make it as empty for Message Processor function.
Hope this solves the porblem,
regards
Naveen

Report of Seniority employee

Similar Messages

Maybe you are looking for