Report of Servers

Is there a way to create a custom report to show all the servers we have deployed?

jwdesselle,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Clustered Reports 9i Servers

Hi,
Trying to setup two reports 9i servers in a cluster (NodeA.repserv and NodeB.repserv) but having some problems getting them to sync.
The servers are installed on seperate mid-tiers on the same subnet.
Having problems with one server creating a job and the other trying to present it, but because they are using their own caches either a wrong report or an error results.
Getting some confusing information researching MetaLink.
Wondering if anyone knows:
Do I need a central cache for the servers?
How do I get both reports servers in sync as far as job_id generation?
TIA,
Jim

Hi,
Trying to setup two reports 9i servers in a cluster (NodeA.repserv and NodeB.repserv) but having some problems getting them to sync.
The servers are installed on seperate mid-tiers on the same subnet.
Having problems with one server creating a job and the other trying to present it, but because they are using their own caches either a wrong report or an error results.
Getting some confusing information researching MetaLink.
Wondering if anyone knows:
Do I need a central cache for the servers?
How do I get both reports servers in sync as far as job_id generation?
TIA,
Jim

I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?

Hi,
I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
So and idea of way I dont get data from or servers? Missing client setting for servers?
/SaiTech

Hi,
I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
/SaiTech

Error starting forms and reports manageed servers on windows server 2008

Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
[2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
[] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
[APP: em] Falta la configuraciÃ³n de registro o no es vÃ¡lida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
any suggestions?
weblogic 10.3.4
forms 11.1.1.4
windows server 2008 x64
JDK :java 6u30 x64

delete all, re-install all... ok

One Report, Two Servers, Debugging

I have a report that uses multi-select parameters.
It is deployed on two SSRS 2008 R2 Report Servers.
It will run on one but not other.
Are there any kinds of SSRS 2008 R2 debugging tools to find out what is the difference between the two servers?
It may be an ODBC driver but I am not sure.
Thank you.

First we need to identify what is generating the error on the one server. This error occurs when you pass too much for a given data type. For instance, on one server an int parameter value that is generated from a SQL query might result in a bigint value
that overflows the int data type. Or a string passed to a char(10) might exceed 10 characters while it does not on the other server.
What is the query text where these 2 parameters are used?
If you remove these parameters from the data set filter, will the report run without the error?
If so, what are the values for these 2 parameters? (add 2 text boxes to the report to display the parameter values using Join(Parameters!Parameter1.Value,"; "))
Then we need to determine why it is not happening on the other.
Why is it deployed to 2 servers? Is it connecting to different data sources?
What is the difference between the two servers where it is deployed.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Custom reports for servers managed by administrators

Hi,
I'm trying to create a report using the report builder but I need some helps. First I have added the attribute "Managedby" in my system discovery method.
Now i want to create a report that display the server name, the OS, and the managed by attribute. How can I do that ?
any helps ?

Here are few links that should get you started with reporting:
http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
https://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Basically you need to find out where the ManagedBy -data is stored, probably in v_R_System like noted here:
http://www.systemcenterdudes.com/add-custom-active-directory-attribute-sccm-inventory/

FIM Reporting, 3 servers needed?

Hi all,
Very short question. For FIM 2010R2 reporting you need 2 additional components:
-SCSM Dataware house server
-SCSM Management
I know we can't install SCSM & Dataware house on the same server. Is the following topology supported:?
Server1: SCSM Dataware house
Server2: FIM Service, Portal and SCSM Management
Or do I need another server(let's say Server3) dedicated for SCSM Management?
Kind regards.
Find me on linkedin: http://nl.linkedin.com/in/tranet

Never mind.. Found my own answer, should be possible:
http://technet.microsoft.com/en-us/library/jj133853(v=ws.10).aspx
Find me on linkedin: http://nl.linkedin.com/in/tranet

Dsadm reports running servers as stopped

We were recently migrating an old setup onto somewhat newer platform, and found a piece of strange behavior: "dsadm info" reports both "dsins1" and "ads" instances as stopped, even though they are running. This happens both when they are integrated into SMF and not, 32-bit and 64-bit mode.
Platform: DSEE 6.3.1_sec, Solaris 10u8 x86_64
Because of this:
1) DSCC refuses to work (thinks ADS is down); likewise "dsccsetup status" returns incorrect "stopped" result (no surprise - I trussed that it calls dsadm for the status query).
2) SMF refuses to start - "dsadm start" quits instantly, though it spawns a working LDAP instance. It is however possible to force SMF to work properly by setting it up to call $INSTANCE_PATH/start-slapd and stop-slapd as SMF methods.
3) subsequent calls to "dsadm start" while the server is running don't detect that it exists, and the program removes the "invalid" pid file from the instance's logs directory. This makes further stop/restarts more tricky.
Also found that the start/stop scripts rely too much on pid files and don't inspect SMF_FMRI (or the service instance mentioned in $INSTANCE_PATH/config/state), so absent pid-files lead to misdiagnozed errors with default scripts. That is not difficult to fix, however...
Access rights seem normal, as compared to other similar systems. Old installation (cloned onto new VM and live-updated) did not show such behaviour...
So far I failed to truss anything reasonable out of this... any ideas, short of re-installation (which I'll try in another zone of the same box soon anyway)?
Thanks,
//Jim Klimov
Edited by: JimKlimov on Feb 14, 2013 11:36 PM

It seems that the problem was somehow because the server was installed in a 32-bit VM, and migrated onto a newer host capable of running the 64-bit VMs, so Solaris switched to that. While there were no actual problems with database files, source architecture seems to have got recorded there and confused some verifier routines?
I tested that a newly-made DS instance works as expected. Its start/stop scripts referenced "amd64" in the paths, but changing original dsins scripts accordingly did not help.
Ultimately, data and configs were exported from original instance, which was then destroyed. New instance remade in its place and data reimported again and replications reconfigured and customizations (plugins, acls) reapplied, and all works like it should now. Rinse and repeat for siblings in the MMR cluster.

Report to return all servers under DPM

Hi,
I'm tying to create a report to return all servers currently under DPM protection. I have a number of DPM servers and need to report which servers are backed-up by which dpm server.
I'm joining the following tables together [tbl_AM_Server], [tbl_AM_InstalledAgent], [tbl_AM_Agent] but i'm getting more servers coming back than the interface is showing. They may have been servers that were previously removed. This is what my query looks
like:
select distinct s.NetbiosName
from [dbo].[tbl_AM_Server] s
inner join [dbo].[tbl_AM_InstalledAgent] ia
on s.ServerId = ia.ServerId
inner join [dbo].[tbl_AM_Agent] a
on ia.AgentID = a.AgentID
where ia.Deleted = 0
and ia.Enabled = 1
and s.NetbiosName <> (select @@SERVERNAME)
Any help is appreciated.
Paul

Hi,
This should work better.
select distinct s.NetbiosName
from [dbo].[tbl_AM_Server] s
inner join tbl_JM_JobDefinition jd
on s.ServerId = jd.ServerId
where jd.IsDeleted = 0
and s.IsDPM = 0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

SCCM 2012 - Reports display No Servers

Hi Guys
Im having a issue with getting reports from System Center 2012, after selecting the the required fields and adding the servers to run a report on, it generates the report with servers listed as 0.
any advice would be greatly appreciated.
Thanks

http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?forum=operationsmanagergeneral
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Crystal Report scheduling error in 3.0, intermittently!

Has anyone gotten this error while scheduling reports on 3.0? My client is experiencing very frustrating issue with cr2008 and xi3.0
When reports are schedule, sometimes they would get errors such as:
An error has occurred: The object with ID 234211, Title "Test Report", Kind "CrystalReport" has changed since last query (FWM 02050)
To replicate this, locate a report that has prompts (LOV). Go to InfoView and View the report on demand (or click on schedule) so it brings up the prompt page. Leave the prmopt page up, open another instance of InfOView or go to CMC, and schedule this report to run now. let it finish. the implication of this is that it will update the parent's last runtime property.
Then return back to the original browser (the one with the prompt page opened), click to select some of the prompts. it will error out while you are selectin the prompt
When we receive this error in Infoview, the java error when i "view source" is as follow;


Once the above issue happens a few times, the CrystalReportProcessing Server would lock up and users will start to experience this error:
Error - Unable to create report page
Once this happens no one is able to view the report again unless we restart the Crystal Report Processing Servers
has anyone experienced this?
thanks
Simon

Morning Simon,
The source doesn't seem to be showing any error message or explaining anything however the error FWM 02050 might say something. Have you searched the Wiki or Articles about this?
Personally I have not seen this type of error before however it seems that either the source or the layout of the report gets changed and hence it errors out as it does not match with the source.
For example, in the report maybe there is a dynamic parameter which gets changed occasionally or any other report object which has a source linked gets changed.
Does this happen only with one report or all the reports?
Does anyone change the reports?
How many dynamic or static params are there in the report?
How is the report connected (odbc or any other means?)
Does the server react like this with other reports as well?
Here is the list for error message from BO you might it find handy
[help.sap.com/businessobject/product_guides/boexir3/en/xi3_error_message_guide_en.pdf]
I think we need to investigate first where the problem is generating from and then find out about this error.
Regards
Jehanzeb
Edited by: Jehanzeb Navid on Oct 15, 2008 8:48 AM
Here what error given above says
The object with ID , Title "", Kind "" has changed since last query
(FWM 02050)
Cause
The required object has changed since the last query.
Action
Query the InfoObject again.
Maybe the end user is not query the report properly?

Creation of Report Job Server

I've just installed a new copy of XI R2 running parallel with Crystal Enterprise 10. My Enterprise 10 has 4 report job servers and I need to have XI R2 configured with 4 too before I start migrating the reports from CE10 to XI - How is this accomplished?

On the server, launch the CCM (central configuration manager) from the program files\business objects.
one of the icons looks to be a plus sign, holding the mouse over it would indicate "add server" Do this to add additional job servers. Since there are multiple jop servers insure that you select the crystal reports job server.
Regards,
Tim
Edited by: Tim Ziemba on Jul 15, 2008 10:56 AM

Forms and Reports 6i to web migration

Hello,
Is there any white paper that describes about how to migrate from client server architecture to a web running on UNIX?
We are migrating from forms and reports 6i running on windows to web running on UNIX with the versions of products.
Thanks in advance.

check this out:
http://otn.oracle.com/products/forms/htdocs/upgrade/content.html
I have tried running Forms/Reports 6i servers on Solaris 8. It was different than using the 9iAS EE forms/reports services - but the concept is similar. I also used whitepapers that I downloaded from Metalink which were explaining the client/server and the web form design differences (such as when-mouse tringgers won't work in web forms, etc).
regards

Number of rows returned for a report

I want to create reports on serveral tables, the number of rows in these tables varies a lot (5, 5000, and the other one can have 10000+ rows).
In the Reports Attributes page, is there a way to set the max number of rows return to the number of rows of the table? For example, for a table that has 10000 rows now, may grow to 20000 rows in the near future. If I specify the "Max Row Count" to 20000, the number may be outgrown yet again soon. If I can specify "Max Row Count" to "Current number of rows in the table" then this problem will not happen. Can it be done?

that "Max Row Count" attribute is used to limit the number of rows returned by a htmldb report region. in your case it sounds as if you want to show all available rows all the time. in that case you'd be fine to just put a very large number into that field like 4million. that way you'd always show all your rows.
hope this helps,
raj

In Solution Landscape Application Servers are not displaying

Dear All,
We are integrated SOLMAN (7.0 Ehp1) server with R/3 Dev,Qua,Prd servers but in DSWP >Operations>Solution Monitoring-->System monitoring / Administration .We can see the Dev,Qua,Prd servers but our requirement is under Dev server we have 4 application servers but those servers are not displaying.
Please suggest....
Regards,
Pavan.

Are these showing in SMSY
Please check SM51 in CI to ensure these are visible and reporting app servers
Please check in RZ20 in CI to ensure these are visbile and reporting data
Please check RFC connections to Solution Manager
Best wishes
Stuart

Report of Servers

Similar Messages

Maybe you are looking for