Report on all CO Master Data Record changes

Hi everyone,
I am looking to have a report to display all CO master data (cost elements, profit center, costs centers changes (what, when, by).
Does it exist a standard report for this? Or do I have to user a query to do so?
There is the T-Code KS13 for the costs centers and KS13 for cost elements but I did not see anything about profit center master data reports.. and anyway they are on different report. I would like everything on the same report.
Thanks.

Hi,
Please find the following tables which will provide CO master information.
You can check the GL balances using the T code: S_PL0_86000030
Which will provide profit center wise report.
Regards,
Pavan Kumar Arvapally

Similar Messages

  • How to get master data records that do not have transaction data in a query

    Hi,
    How to get master data records that do not have transaction data in a query output. Can we create a query or any other way to get the master data records that do not have transaction data?

    Hi,
    Create a multiprovider which includes transactional data target and master data info object. Make sure that identification for this master data info object is ticked on both the provider.
    Create report on this multiprovider , keep the master data info object in rows , and now you should able to see all the values which are there in master data info object irrespective of transaction happened or not .
    Next you may create condition showing only zero keyfigure values , ie. master data without any transaction.
    Hope that helps.
    Regards
    Mr Kapadia

  • Incident management and Critical Master data table change management.

    Dears,
    I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
    I want to know how many days should be required for this activity and please share documents.
    Shivam

    Hi,
    I faced a similar situation,
    I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
    Also ran RSRV check which was showing no negative results.
    I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
    I ask you to wait till the next process chian run, and try all possible ways to activate.
    If it is not corrected then raise an oss to SAP.
    Thanks & Regards,
    Vishnu

  • Error while realigning aggregates through master data attr. change run

    Hi all,
    We are using Sales Overview cube (SD_C03) on which we have built aggregates. now during the master data attribute change run it tries to realign the aggregate once the master data is loaded via Process chain. In this step we are facing an error:
    "Error while procesing aggregate <aggregate technical name>"
    From ST22 we can find
    Database error text........: "ORA-14400: inserted partition key does not map to any partition"
    Internal call code.........: "[RSQL/INSR//BIC/F200009 ]".
    Whereas from SM21 we can find out:
    Database error 14400 at INS access to table /BIC/F200009.
    /BIC/F200009 is the fact table of one of the aggreates we have. really looking forward to your valuable suggestion.
    Thnaks,
    Abhishek.

    Hi Jogeswara Rao Kavala,
    When I am pressing back or NO option  it is showing error like this
    What is this OK- Code means?
    how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
    Sunil Boya

  • Identifing duplicate master data records using the MDM Import Manager

    hi all
    I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
    i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
    when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
    My Question is :
    I am getting vendor data from SAP R/3.
    In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

    Hi Sheetal
      Here we go when do you Import any data (vendor master) please follow the following steps;
    1. First of all apply the map to the source data
    2. In the Match Record tab there are 3 possiblities
       a.[Remote Key] : Checks the current source rec with
         repository along with all the fields - This is
         default
       b.Remove [Remote key] - by double click the same; and
         choose any single fields like Vendor Number or
         name - Then the current record will be matched
         with the repository based on the field.
       c.Instead of single field you can choose combination
         also.
    3. Based on the Match results, match class will be set
       automatically;
       a. None
       b. Single
       c. Multiple
    4. Then Match Type
        a.Exact-All the individual value matches are Equal.
        b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
        c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
    5. then chek the Import status and Execute the import.
    Hope this helps you.
    cheers
    Alexander
    Note: Pls dont forget reward points.

  • How to find all the Master data extract structures and Extractors

    I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
    Question: How to get a complete list of all Master data extract structures and corresponding extractors?
    Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
    How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
    Regards
    Sasanka

    Hi,
    try the table ROOSOURCE and search the data source with string in astrick attr  for master data and for text with text
    This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
    Thanks
    Ajeet

  • Standard method to archive/delete all vendor master data

    Hi every abap expert
    Does anyone know how to archive all vendor master data
    in a client?
    If use T-code : SARA . The vendor master data is required to mark deletion flag before archiving.
    Any standard T-code can set all vendor master data with  marked deletion flag ?

    Hi Boris!
    Give XK99 a try. With XK06 a single change is possible and in FI also FK06 is available.
    When XK99 has problems with field LFA1-LOEVM, then you can make easily a CATT for XK06.
    Regards,
    Christian

  • Master data records with one key

    Hello All,
    I have scenario that I need to load the master data records with one key.
    For ex--
    Cluster            Dcode               version
    5000                 DC1                  2008
    5000                 DC1                  2008
    5001                  DC1                  2009
    Could you please let me know possible ways.
    Thanks

    In your case if Cluster is the key then the underlying attributes data will be overwritten when the same cluster key comes.
    as per you example data finally it loads only two records in to the target, since first two records key is same.
    Hope this helps.
    Veerendra.

  • How to UPDATE MASTER DATA RECORD PA0377 using FM HR_INFOTYPE_OPERATION

    How to UPDATE MASTER DATA RECORD IN INFOTYPE 0377 DIRECTLY using function module HR_INFOTYPE_OPERATION ? When i use operation = 'MOD'  im getting an ERROR as NO DATA STORED FOR 0377 IN SELECTION PERIOD.
           Can anyone please help me how to use HR_INFOTYPE_OPERATION to UPDATE MASTER DATA RECORD.
    Thanks,
    Karthi.

    Hi,
    please check this code
    it is very useful
    infotypes: 0105.
    parameters: p_pernr type p0105-pernr,
                p_subty type p0105-subty,
                p_begda type p0105-begda,
                p_endda type p0105-endda,
                p_opera type pspar-actio,
                p_usrid type p0105-usrid,
                p_commt as checkbox.    "Useful only when NO_COMMIT is 'X'
    data: w_return type bapireturn1,    "Error handling data
          w_key type bapipakey,         "If record has been created or changed the created/ changed
                                        "record's key (PSKEY) will be populated
          v_message type string.        "For printing returned messages
    call function 'BAPI_EMPLOYEE_ENQUEUE'
      exporting
        number = p_pernr
      importing
        return = w_return.
    if w_return is initial. "Employee is not locked
      p0105-pernr = p_pernr.
      p0105-subty =
      p0105-usrty = p_subty.
      p0105-begda = p_begda.
      p0105-endda = p_endda.
      p0105-usrid = p_usrid.
    *Calls Internally HR_MAINTAIN_MASTERDATA
      call function 'HR_INFOTYPE_OPERATION'
        exporting
          infty         = '0105'
          number        = p_pernr
          subtype       = p_subty
          validityend   = p_endda
          validitybegin = p_begda
          record        = p0105
          operation     = p_opera
          dialog_mode   = '0'
          nocommit      = 'X'
        importing
          return        = w_return
          key           = w_key.
    endif.
    if w_return is not initial.
      message id w_return-id type w_return-type number w_return-number
              with w_return-message_v1 w_return-message_v2 w_return-message_v3
              w_return-message_v4 into v_message.
      case w_return-type.
        when 'A' or 'E'.
          format color col_negative. write:/ v_message.
        when others.
          format color col_heading. write:/ v_message.
      endcase.
      call function 'BAPI_EMPLOYEE_DEQUEUE'
        exporting
          number = p_pernr.
    else.
      format color col_positive. write:/ 'Record Updated Successfully.'.
      if w_key is not initial.
        write:/ 'Key contains',
              / 'Personnel Number:', w_key-employeeno,
              / 'Subtype (absence type):', w_key-subtype,
              / 'Start date of Absence:', w_key-validbegin,
              / 'End date of Absence:', w_key-validend.
      endif.
      commit work.
    endif.
    Thanks and regards
    durga.K

  • Insert new Master Data Record for an InfoObject using a Function Module

    Hi @ all,
    is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
    I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
    Thanks!
    Regards,
    Johannes

    use this
    RSNDI_MD_ATTRIBUTES_UPDATE

  • How to check the master data records in using SE16 transaction?

    Hi,
    Can you please help me to check the master data records using SE16 transaction?
    Loaded master data for Characteristic and want to check the records in the master data tables.
    Thank you for your help!
    Lakshmi

    Hi!
    Welcome to SDN.
    you have to check the master data tables.
    soo in Se16 you have to select the appropriate master data table and view the data.
    following thread explains about masterdata tables
    MasterData table?
    regards
    mohan
    Message was edited by:
            Mohan Krishna

  • Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

    Hi,
    Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
    The changes basically consist of adding several new MDS members which can be accessed via Excel.
    Thanks in advance,
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    In MDS terminology an Entity is metadata, and Entity Members are the data. 
    Typically changes to an Entity (ie model design changes) are promoted to different environments.  Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
    Adding, editing and deleting entity members is performed directly in each environment.
    If you want to selectively import data from a Dev environment, you can use staging.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • IDOC:Master Data Records are not going to be updated after posting the IDOC

    I need to create employee Master data records in R/3 .I am using the IDOC HRMD_A07, though the IDOC posting is successful no tables, corresponding to employee master Data are getting  updated,
    Can anybody plz Let me know the possible reasons and solutions for this?
    Thanks in Advance,
    Sandhya

    hi i hecked the job log entries in SM37 in source system, the idocs were returned with '0' records. i took the Idoc number and checked in BD87 it displays some logs in that one node shows the red status with the detail as follow  IDoc entries in tRFC queue      3383
    the next one is green                Data passed to port OK                    1
    i selected the red staus node and clicked 'process'  button but it displays as
    The operation cannot be carried out with this node type
    wht should i do now, wht may be the reason for the datasource not pulling the data from R/3 to BI?

  • Copy All Employee Master Data

    Dear All,
    In Human Recource module I have a list of Employees, Now I create new database and want to copy all Employee Master data from old database to new database . Please give me the solution for this problem.
    Thanks & Regards

    HI All,
    Option
    1) you may write a querry and get desired data what you need for SAP's standard template of DTW and then export that template in the excel and again with the help of DTW you can migrate that in your new database.
    2) select required tables from SQL Server Management which is OHEM and HEM6 copy it and paste in the desired database. But be carefull you have to have knowledge of SQL.
    i still think the second option is quiet easy will take just 10 -15 min.
    Ashish Gupte

  • Report to display material master data changes

    Hi,
    Is there a standard report available to display all changes to material master data over a specified time frame i.e all changes made alst week,all chnages made today.
    Please suggest.
    Thanks in advance.

    Hi!
    Appart from MM04, you can also have a look at MM03 or MM02:
    1. Goto MM02 or MM03 transactions and enter the material.
    2. Select the relevant views for which you want to have the details.
         In the Bar menu follow the path Environment -> Display changes.
    Here you will get the list of changes done to the fields with Old and
    New values.
    Appart from these two tools, there is not any other report provided in the standard for this target.
    I hope this helps!
    Esther.

Maybe you are looking for