Report on Change in Condition Record effects which all Sales Orders

Hello Gurus,
Thanks in advance. My customer requires a report which gives him list of Sales Orders effected due to Change in Condition Record.
Proper input to this will be greatly rewarded.
Regards,
Vishvesh Kamdar

hi,
whenever u change the condition record it will fall under the validility date, ie.,
example:
Condition record for cond type PR00 is
valid from 01/05/2007 to 31/99/9999 is Rs.1000
but suddenly when u change prices on 01/10/2007 then system will display has below
vaild from 01/05/2007 to 31/09/2007 is Rs.1000
vaild from 01/10/2007 to 31/99/999 is Rs.1500
hence u take all the sale orders & billing document which are created from 01/10/2007, this will slove ur purpose
SE16-->vbak--->enter -
> here u will find created on enter the date & execute
hope this heklps u
regards,
Arunprasad

Similar Messages

Condition records wrongly populated in sales order instead of billing doc.

condition records are maintained billing wise to populate in the billing document for pricing condition where as while creating the sales order itself i am getting the condition records populated in the sales order which is not correct as it needs to populated in the billing document only

yes after looking at pricing analysis itself we have concluded that these condition type has the key combination billing document F2 and displays the condition record within the sales order itself, but this condition record with key combination billing doc. F2 should be populated in billing doc only what is the reason behind this

Condition record is missing in sales order

can u please help me on my issue,my issue is in my sales order there are the different types of materials are there,on which the tax is applicable as12.5% on few materials,20% on few materials,on service materials tax is 10%, 2%, 1%,depending on this i have mapped the conditions and it is calculating accordingly,but when i see in sales order by selecting one material,when i go to conditions,analysis of that particular line item,it shows 10% 2% 1% condition records are missing,same wise verse when i select another condition and see the analysis it shows 12.5% condition record is missing,when i go and select the another condition,if i check the analysis it shows 20% tax condition record is missing,but its not throwing any error,and showing document is complete,can any one suggest is it the right procedure or i have to make any changes in to it.

Hi
I see no issue in this. It is correct system behaviour.
When you have different tax rates for different materials, obviously the condition records will be accessed based on the entries maintained for each material.
E.g For material with 12.5% tax rate when you check in vk13, you will find only that entry and no entries for 20% and 10%, 2% and 1%.
So the access sequence fetches only what has been maintained in VK11 for each material.
This is absolutely fine. Go ahead and save the order.
Regards
Madhu

Mass change for condition record

I try to change the condition record for material with validity period of one year starting next year Jan 1st. Since that material is already exists in the system with validity period of current date to 12/31/9999, it is not saving my changes. When increase price by 5%, it is not giving any problem but when I display to see the changes "Environment-Changes-Per condition record", it is giving an popup box saying "Change documents for conditions not yet save are not possible"
I try to delete material condition with longer period. It is deleting at that moment but when I come back and see still that material exists with longer period.
how do I deal with this problem to solve?
Fully rewarded for solution.
Thanks,
Manu.

Hi Manu;
At any given point in time you can have only one valid condition record with a validity period.
1. Create a condition record with validity from today to 12/31/2007
2. Create a condition record with validity from 01/01/2008 to ....
You issue would be solved.
Regards.

IDOC trigger for changes in condition records

Hi Guru's,
I want to trigger IDOC every time I create a condition record and every change in condition record. can you suggest me how to trigger IDOC COND_A01 in above scenarios.
Thanks in advance.
Suresh

Oh, price condition.
In Vk13, there is a icon "Condition Information", narrow your results in the selction criteria. In output, there is a 'Send Condition" icon. then enter your message type and logical system. After that, you can use WE02 to view the idocs.
Please revert if answered.

Report for the List of Vendor for which no Purchase order has been created

Hi ALL
Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
regards,

Hi Prateksha Vaid ,
Go to transaction S_ALR_87012093
Select accounts with no purchases checkbox and execute
Diwakar
reward if useful

HT5620 I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.

I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.
How can I change it when I cannot view it on my account. I am not even sure how this got setup.

If you mean your rescue email address, it's in the Passwords and Security section, after you answer the two security questions.

Condition type not coming in sales order

Hi,
we have a condition type Z026. The issue is that it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
what could be the issue.
regds

Hi,
Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
If the behaviour is different, pls lemme know

Condition Types display in a Sales Order

Dear Gurus,
In our Pricing Procedure we have 2 condition types ZFR1 (Freight) and ZINS (Insurance) which are always Header type and should be entered manually. So according to normal procedure, I inserted them in the pricing procedure and maintained them as 'Manual' and selected them as Header conditions in Details of condition types with no Access Sequence and also selected them as 'No Limitations'.
Now my requirement is that these condition types ZFR1 & ZINS should be available by default in a Sales Order under 'Conditions' tab and under 'CnTy' column and their values should be in Editable mode under 'Amount' column, when we go to the Header data view, but should be greyed out in Item data view, since they are Header conditions belonging to the whole document.
Here my problem is that what ever combination I do in V/06 or V/08, system is not displaying the condition types by default. That is, I have to or the end user has to remember to enter the condition types and enter the values. But if I can display them as default when we go the Header view, Conditions tab,. end user will see them and will remember to enter values in them.
The one problem I have is, I cannot make them as 'Mandatory, as they are not always required in all Sales Orders, so there are times when we dont have to enter any values there.
I went through the search forum but didnt find any useful material, kindly help me out here.
Regards
Venkat - Hyd

Dear Lakshmipathijee,
Thanks for your answer, I have indeed maintained both the condition types at Header level. Normally when we do this kind of settings, the conditions screen is like the following:
10....0....PR00....Basic Price...........1000.....(this 1000 is from condition record)
Now if the end user needs to add values for ZFR1 or ZINS, he needs to remember the Condition types and enter them to be able to enter values in the document.
But suppose there is a way of displaying the Condition Types with out values as shown below, then the end user will not have to remember to fill them up, he can simply come to the conditions screen and they are visible there and he will just fill them up with values. The following is how I would like the conditions screen to be seen:
10....0....PR00....Basic Price...........1000.....(this 1000 is from condition record)
20....0....ZFR1....Total Freight.........._____...(this should be a blank field)
30....0....ZINS.....Total Insurance......_____...(this should be a blank field)
In these editable fields of Freight and Insurance, the end user will enter the values in case they are neccessary or leave them blank.
If I maintain the condition types as mandatory and manual, header condition screen is not displaying the Condition types??!!!!
If I maintain the Header conditions as Item conditions also in V/06, then the header conditions screen is displaying the conditions in grey mode, without any value (as they are manual conditions) and in the item screen, they are in editable mode, but system is not allowing me to input any value, saying these condition types are not item level condition types and they are to be maintained at header level, but like I said, at Header level, the fields are greyed out !!!!
So, any help plz..
Regards
Venkat - Hyd

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

Report of all sales orders for a business unit

I am analyzing revenue, and I would like to run a report that would list all sales orders and the value of those orders in a particular business unit.
I require the value of each and every sales contract during a certain period. Can I run a report that lists all sales contracts opened during a particular period?

Hello,
from the standard SAP menu, under: "Logistics --> Sales and Distribution --> Sales --> Information System --> Orders" you can find some transactions reporting sales orders lists, such as VA05 or SDO1, which perhaps could fit your requirements. Otherwise you can create a query to merge the tables containing the information that you need. As of my knowledge there's not an organizational level called "Business unit" in SAP, so you should check if in the transaction mentioned above the field you use to identify the "Business unit" is available.
Hope to be useful.
Best regards,
Andrea

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

New condition in pricing procedure in Sales Order

Dear SAP Gurus,
I want to add one new condition in pricing procedure in Sales Order.
Earlier we were having following conditions.
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU    (Education tax)             3%(on ZSER)
ZEDT                                        100% sub cond on ZEDU
Now I want the structure to be
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU (Education tax)               2% (on ZSER)
ZEDT                                        100% sub cond on ZEDU
ZHED (Higher Edu. Tax)             1% (on ZSER)
ZHET                                        100% sub cond on ZHED
For this I have Done following Customizings
Created new Condition Types (ZHED & ZHET ) by Coping from ZEDU and ZHET respectively.
Maintained pricing procedure with these conditions.
Made condition Record for ZHET through VK11.
But I am not able to set ZHED as 1 %
Please guide where to configure this and how ?
Thanks & Regards
Rajesh

Hello,
Have you maintined the calculation type of the condition type ZHED as A - Percentage ? If no, then maintain the same. If it is already maintained, then let us the error when you are trying to maintain the condition record as 1%.
Prase

User Exit to change the Ship-to party address at Sales Order headder level

Hi,
I have requirement like this......
I need to change the ship-to party address at Sales Order headder level. for that which user exit i need to use and which structure i need to use to update the transaction.
I used : userexit_save_document_prepare, in that i passed data to 'xvbpa' and 'xvbadr' structures. even though it is not update the transaction.
Please let me know the answer.
Thanks,
Satish.

Hi Satish,
Step1. Create new Data Copy Routine using Tcode VOFM.
Step2. *-----------------------------------Ship to Party from contract
 IF CVBPA-PARVW = 'WE' OR
 CVBPA-PARVW = 'SH'.
 REFRESH IT_STP.
 SELECT KTOKD
 A~KUNNR
 NAME1
 NAME2
 A~ADRNR
 FROM VBPA AS A INNER JOIN KNA1 AS B ON A~KUNNR = B~KUNNR
 INTO CORRESPONDING FIELDS OF TABLE IT_STP
 WHERE VBELN = CVBPA-VBELN .
Step3.
 CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
 EXPORTING
 ENDPOS_COL = 80
 ENDPOS_ROW = 10
 STARTPOS_COL = 10
 STARTPOS_ROW = 5
 TITLETEXT = 'Your Title'
 IMPORTING
 CHOISE = T_SELIDX<=====Index No of selection
 TABLES
 VALUETAB = IT_STP
 EXCEPTIONS
 BREAK_OFF = 1
 OTHERS = 2.
Step4.
 READ TABLE IT_STP INTO WA_STP INDEX T_SELIDX.
 IF SY-SUBRC = 0.
 CLEAR:CVBPA-KUNNR, CVBPA-ADRNR.
 MOVE WA_STP-KUNNR TO CVBPA-KUNNR.
 MOVE WA_STP-ADRNR TO CVBPA-ADRNR. <========Address ID (Change Here).
 ENDIF.
Regards,
Amrendra
Moderator Message - Please do not reply to old, dormant threads.
Message was edited by: Suhas Saha

New Condition Table not working in Sales order

Dear All,
I am facing problem in pricing procedure. I have created new condition table(LIFNR & ROUTE), included Vendor(Fwd Agent) and Route in condition table with sales area. I have added that condition table in access sequence and assigned access sequence to condition type. Then Condition type added into pricing procedure and assigned pricing procedure to document type.
In sales order I've added route and fwd agent but while checking in analysis system does not determine route and fwd agent.
Thanks and Regards,
Kaushal

hi,
i have a query to ask why you need LIFNR in condition table creation.
where in sales order it will trigger automatically.
please check the config settings for route determiantion automatically.
so that if route comes automatically into the sales order then from where you will trigger LIFNR.
please clarify.
regards,
balajia.

Report on Change in Condition Record effects which all Sales Orders

Similar Messages

Maybe you are looking for