Report on Consolidated Status

Hi Guys,
I am looking for a report which can be generated for all the NC in consolidated status for which Request are waiting in PRD buffer and not imported to PRD yet.
scenario
Whenever we consolidate a NC all the request goes to PRD buffer and waiting for import to PRD status
A background job runs and move the request to PRD.
Request is now implemented in PRD
and even after it is moved to PRD the NC status remain the same Consolidated as earlier.
So we need to differentiate between the ticket that have changes getting moved to PRD and already moved to PRD.
I hope i clarify my requirement.
Thanks
Prakhar

Can anyone help please
Edited by: Prakhar Saxena on Apr 19, 2010 10:26 AM

Similar Messages

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Report for PO status

Hello Experts ,
Can you tell me the standard report for the status of PO as in GR qty , value , in voiced qty & value etc & open qty & value ??
Regards

hi,
There is no direct report, but for a single material you can check the PO history from ME2N etc reports...
After executing the report there is the PO history tab...in it can see it individually...
But from the table you can see collectively...
Hope it helps..
Regards
Priyanka.P

Report for Consolidation

Hi,
I need to create a report for consolidation purpose.
The report should contain the same information as the FBL3N sum for several GL accounts for all company codes, one line per account and for eaxh company code one row.
I would like to use the report painter to create such a report, but I do not know the correct library for that.
Or does anybody know a better way to create such a report?
Thanx for any help!
Britta

Sorry for being blind: I took the GLT0 table...

CJE0 - Reports to be able to report on 'system status'

Hi there,
Is there already an ability in CJE0 reports, or other reports, to be able to report on 'system status' (Project status) in the dynamic selections by another name? If not can we get it added as a field choice in the dynamic selections list?
Thank you,
Barbara

Hi,
This thread will help you.
/message/5463977#5463977 [original link is broken]
Regards

PC - Generating a 'Dashboard' report on the status of the controls already planned for the 1st quarter of 2014, shows the control with status Submitted.

Hi;
I have a problem in GRC-PC I can't solve. My User is generating a 'Dashboard' report on the status of planned for the 1st quarter of 2014 (compliance controls), this controls not planned, but presented the control with status Submitted.
I appreciate any help...
Thanks all....
Regards....

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Need a report on delivery status and response status for capaign recipients

hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
thanks

Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
Response status - This shows message opened, click-thru's, opt outs etc
Delivery status - Hard bounce, soft bounce etc
To get more details from the above results add the following.
Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
Address Moved or Unknown Address only.

Trend Report and Consolidation Trend Report

Hi HFR Gurus,
I have a requirement to develop Trend Reports. Could you please explain about Trend Reports? How to Develop a Trend report and what are the requirements should meet? What are the columns and rows should consider to develop? What is difference between Trend Report and Consolidation Trend Report?
Thanks
Challenger

This is a common discussin here. Have a read of this: Re: Very Urgent FR Report
But also I would ask the business/client for a template. Each business could have a different understanding of a Trend Report. There are no set rules for having certain dimensions on rows/columns/pages.
Cheers,
Mehmet

Consolidation Status

Hi,
We have an application in HFM (Ver. 9.3) which is completely consolidated. We copied the application using the copy application utility and created a new application.
When we see the consolidation status in new application, the highest level shows "OK". Where as the lower levels shows CN and some show CN ND. Isnt it that all should show only OK as it was copied from an application which was completely consolidated??
Please let me know.
Thanks,
Sathish
Edited by: user6389045 on Oct 1, 2008 6:50 PM
Edited by: user6389045 on Oct 1, 2008 6:52 PM

Hi,
Thanks for your reply. But my understanding is that, when we copy a application which is completely consolidated, the new application is a replica of it including the consolidated data.
Isn't it that one of the logical reasons for copying a app to another one is to save the consolidation time for new app??
Please let me know.
Thanks,
Sathish

I want to use spiceworks to report on the status of bitlocker across multiple

I want to use spiceworks to report on the status of bitlocker across multiple customer sites and domains, I didn't want to use MBAM as it is complicated and I just wanted to report if bitlocker was enabled or not.
There have been a lot of discussions but I was looking for some thoughts and experiences that were concise on the whole process ie how to implement spiceworks across multiple sites, and then into the reporting. Or is that too much to ask in one discussion?
Thanks!
This topic first appeared in the Spiceworks Community

If you are talking abount the ID is Settings>iCloud you will have to get the persions to give you the ID andpassword or get them to remove the iPod from their account
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
also see:
iCloud: Find My iPhone Activation Lock in iOS 7

SPA112 / SPA122 Report Rule - Delta / Status outputs

Hi,
I've been playing with the Report Rule and the documentation is not very clear when it comes to the two report options: --delta and --status
If I set the Report Rule to [--status]http://myserver/posthandler.php, I see the request coming in but the content of the POST is the actual config file (flat-profile) instead of the status (flat-status). Same goes when using the --delta
I am using 1.3.1 to test but I am sure 1.3.2 is probably not working as well.
Have anyone ever been able to generate a delta and/or get the content of the ATA status.xml file? I can get it from the URL (http://my_ata_ip/admin/status.xml) but would be neat to get it remotely too.
Thanks,
Benoit

I assume you are following Cisco SPA112, SPA122, SPA232D Analog Telephone Adapters Provisioning Guide
I see no --status nor --delta modifiers mentioned in Report_Rule option description. Just --key modifier is described here.
It seems that neither --status nor --delta modifiers are supported on SPA1[12]2.
As far as I know, status and delta reports are supported on SPA IP Phones (e.g. SPA[35]xx) only. The --delta is supported from 7.4.9c firmware onward, the --status has been introduced with 7.5.3 version. See Cisco Small Business IP Telephony Provisioning Guide for more information related to provisioning of this product line devices..
Rate useful responses. It will help others to found solutions.

Consolidated status overview for all test plan

Hi all,
We are performing our Integration test from SolMan. I would like to generate a consolidated report which will give me data same way as the status overview gives for individual test plan.
This will help me to track the progress at the test package level, which inturn is my IT scenario.
Any quick help will be highly appreciated.
Regards,
Smita

Thanks Prabhakar,
I am aware of this, but this gives me details for one test plan. Even when I use STWB_2, it gives me summary of all the test plans, and for status overview I have to go in each and every test plan.
I am looking for some way out to generate the status overview of multiple test plans together in same screen, for reporting purpose.
Any suggestions?
Thanks,
Smita

Reporting Services Point status message errors.

My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
"The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager. It will be rebuilt based on the RSP configuration."
Here's what I think is causing the issue, but I don't know how to solve it.
The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
\\DBServer01 - component server, site database server, site system
\\DBServer01.contoso.com - component server, reporting services point, site system
Any thoughts on how to stop these errors?

Yes, I know this is an old post, but I’m trying to clean them up.
In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Aging Report for consolidating Business Partners

I have a customer that is using consolidation functionality for its vendors. The BP parent it is set as multicurrency, the childrenu2019s for this parent are set with a different currency (USD, CAD, RMB etc). My question is how I can obtain a proper aging report for this consolidated BP (by BP children currency) as for now all the transactions are automatically converted in local currency even when Iu2019m selecting the BP currency to display.
Thank you,
Alex Corbu

Hi Alex
The best would be a query on JDT1 table linked to OINV for example. The problem as you mentioned is that although the document is against the sub account, it is automatically posted against the head account for balance and payment purposes. In the journal file it only keeps the Head account and not the sub accounts. In OINV (and other marketing documents) you can use the FatherCard field to identify the Head account and the CardCode the sub account. These will of course be linked by the Document number from OINV and the Ref1 from JDT1.
The above is assuming you need the information exactly the same as the ageing, as the ageing is by default pulled from the Journal tables. You could simplify this by using just the OINV table. Remember that the balance is made up of Invoices less Credit Notes, so in this instance it would be OINV minus ORIN entries.
Hope the above all makes sense, if not just ask.
Kind regards
Peter Juby

Does anyone have a daily report for system status?

Basically, I am looking for an automated daily report to give me the status of jobs and workflows. I am having a hard time finding the talbes and relationships for all the jobs, workflows, and tasks in the CMDB.
Once I know where to find all the pieces, I can take it from there.

Sounds like a job for OpsMgr.
- Get on the floor, do that dinosaur

Report on Consolidated Status

Similar Messages

Maybe you are looking for