Report on fast moving materials.
I am looking for a report of the u201Cfast movingu201D materials. (it should reflect the mat number; description; unit of issue; unit price; SOH value per mat and the date of the last issue.)
Thank you.
Check the reports MB5B and MB51
Check the Table MVER
Thanks
Krishna Mohan
Similar Messages
-
Report for slow moving material.
Hi friends
I want to create report for slow & fast moving materials..
I have to add following fields in the report
Material, Unit of Measure, Current Stock, Value, Last consumption date, Last movement date...
Now I dont have all these fields toghether in any of the datasources..
What I need to do? Should I create new Datasource with all these fileds..
Has anyone done this kind of report before?
Please suggest..
Regards
SwatiHello,
For slow moving materials , use can use InfoSet to design the same.The infoset will have 0Material on the left hand side and the DSO which holds the transcation data.
or
u can install the standard content 'slow moving material' query and multiprovider 0ic_mc01.
You can get some help from there.
or
try searching in forums with the messgae "slow moving items".you will get useful info.
Regards,
Dhanya -
Depreciation of Slow Moving Materials (MRN2)
Dear all,
I'm currently analyzing the way to create a custom report formed by two sheets:
1. Report with slow moving materials and with the correspondet devaluated value
2. Repot that show the overstock of the materials
Regaring point 1, I've found transaction MRN2 and it seems ok, but there is no possibility to input the stogare location, do you know if there is a way to do it or customize it ?
Thanks and Regards,
FabrizioHi,
Welcome you post on the forum.
You can check through these links to find out something you may not aware of:
http://forums.sdn.sap.com/search.jspa?threadID=&q=%22SlowMovingMaterials%22&objID=f245&dateRange=all&numResults=15&rankBy=10001
Thanks,
Gordon -
Custom Report for slow and fast moving items
Dear Xperts,
My client wants to develop a new report for slow and fast moving items, I checked the std report MC46 however as per std SAP design this report does not consider the special stock like project stock (Q)...could you please help me to know how can develop this new report with following input and output fields?
Input fields:
Plant
Material
Material Group
MRP Area
Special Stock Indicator
Special Stock (Type)
Output Fields:
Material
Material type
Material group
MRP Controller
MRP Area
ABC indicator
Material price
Category field – Slow, Fast, Non-moving
Current Stock
Last Issue Date
Thanks in Advance
Regards
RahulDear Rahul,
If you required project stock and consignment stock with valuated stock report in same place you need to generate new info structure as given below link. Or you can go with customized report with abaper.
Info structure validation
Regards
Sanjeet Kumar -
i would like to get fast moving stock items for monthly random checking ,please if you know any transaction code for that, i used the T-code MC46 for slow moving items but i couldn't generate any good report from it,please advice for tutorial how to get good result through it ,and i need to know if the T-code MC46 give you when last time the stock item was used but i need the movements of stock
please adviceHi,
In SAP there is no standard report to get fat moving items. On what basis you want to identify the material as fast moving. Lets say consumption or sales. Iwant to share one solution regarding this. You can use ABC analysis as a determinant.Using OMCO, you can define cycle counting indicators such that "A" materials might be the top 40% of your inventory (by turnover), "B" the next 30%, and so on. You can then run transaction MIBC which automatically updates the CC indicator on selected materials. The advantage of this approach is that - even if you don't use the cycle counting method for phys inv - you can regularly set and update the indicator on the material master. That way, it is very easy to write a query (SQ01) that lists only "A" items. Note also that ABC indicators exist in other areas (eg PM) but these generally need to be maintained manually. Also, if it's sales you want to focus on (as opposed to consumption/turnover), then sales specific reports MCQ+1 might give good results. Thanking you.. -
Slow Moving Materials with qty
Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish JainPlease check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM -
Hi champs,
i Just want a report on fast,medium and slow moving items... in query reports
regards,
Vignesh.Rhi
if u want the reports in the query report then please tell have u already categorized the items under the three bracket or they would be categorized on the number of sales however please look at sales analyzes report individual and group display hope that would suffice your concern
Regards
Manish -
Hi guys,
is it possible to get non-moving materials for certain material movements report out of oic_c03 since 36 months onwards.
Your help is greatly appreciated,
Thanks
VijayHi,
MC46 & MC50 is the SAP standard Transaction codes for seeing the details about Non moving materials.
Kindly go through that one. U can find all the details about Non moving materials.
Thanks,
Sankar M -
Dear Sap Gurus,
I would like to know how to get the list of Non Moving materials for last six Months with valuation class ...? kindly let me know.Thank you.Dead Stock MC50 looks at the stock level for a material over a period of time and identifies the lowest level that the material reached. That lowest level is the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain zero stock sitting in the warehouse because you were able to plan such that every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you met all demand over a 3 month period and the stock level i that time never dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all requirements.
Slow Moving Stock MC46 simply counts the number of days since the last issue against each material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need addressing - such as excessive stock or unpopular lines - but the results they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an achievable target if there is daily demand and the warehouse works on a FIFO basis with a 2 day minimum to receive and then pick, and in MC46 materials that are very seasonal will obviously show unfavourably at other times of
the year.
In Simple Terms :
MC50: Based on you date range selected, The logic here is "No Consumption" below certain Stock Level.
MC46: Based on the date range selected, if there was no movements (Consumption), the system would classify them as Slow Movers.
Your selection criteria is VERY IMPORTANT, to review your results.
Documentation :
Try using this Menu Path: SAP R/3 Library --> Logistics --> Logistics
General --> Logistics Information System --> Document Evaluations -->
Dead/Slow Movers
Regards,
Ashok -
Scenario:
Slow moving material: When a material is lying in a storage location for 1 month afte the date of GR, it is declared as slow moving.
I wnat to track the movement and its value. Shall I create a new St Loc for Slow moving materials?
Please detail.
Regards
VSHi VS,
An ABC analysis divides items into three categories:
A: Important
B: Less important
C: Relatively unimportant
Just go thru the link provided:
http://help.sap.com/saphelp_47x200/helpdata/en/c1/375b7e449a11d188fe0000e8322f96/frameset.htm
Hope this helps.
thanks,
Viswanath -
Hello gurus,
I would like to creat a report on slow-moving items in LIS, similar to report RMCBLH30 (TAC MC46).
But in 'my' report I would like to see only those slow-moving items in stock. RMCBLH30 unfortunatelly gives my all slow-moving items, even those with quantity = 0.
Could someone please give me a hint on how to do this? Are there any good tutorials in building LIS-reports?
Thanks in advance
AliciaHi,
Please check the last date when any of your stock movement had an accounting impact like GR, GI etc and see whether the data tallies
In MC46 try for double line display tab. It shows last movement date.
Also, check for Detailed Display for each material. It will show the details based on which it is picking last movement date and No movement since days.
From this details you can make out the date which it is taking as last movement......
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock
If you want to generate a Z-report please take the help of technical consultant...
regards,
Patil -
How to develop a report for display unused materials
how to develop a report for display unused materials? where can i find them?
Hi Phani,
I didnt get what u acually mean by unsued material. These are some sample materail types which u can find in table 'Mara' field 'Mtart'.
ABF Waste
AEM Samples
BLG BLG Empties External
BLGA BLGAEmpties Fixed assets
CH00 CH Contract Handling
COMP Prod. alloc., purchased
CONT KANBAN Container
COUP Coupons
DIEN Service
DOCU documentary batch
ERSA Spare parts
FERT Finished product(fert)
FGTR Drinks
FHMI Prod. resources/tools
FOOD Foods (excl. perishables)
FRIP Perishables
GR01 material type 01
GR02 material type 02
HALB Semi-finished product
HAWA Trading goods
HERS Manufacturer parts
HIBE Operating supplies
IBAU Maintenance assembly
INTR Intra material
KMAT Configurable material
LEER Empties
LEIH Returnable packaging
LGUT Empties (retail)
MODE Apparel (seasonal)
NLAG Non-stock material
NOF1 Nonfoods
PIPE Pipeline material
PLAN Trading goods (planned)
etc.
ex:
select * from mara where mtart = 'ABF'.
Regards,
Kiran B -
Hi Experts,
Do you have any query on fast moving items based on A/R Reserve Invoice? Also this should have date parameters.
Thanks,
DonHi Gordon,
The condition is quite vague. But can we generate a query on the no. of transactions of the items based on A/R Invoices and based on a from/to date parameters?
Thanks.
Don -
Reporting on Slow Moving / Non Moving Stock
Morning,
can anyone help on the above please.
How would i run a report on slow moving / non moving stock?
Regards
PMC46 you can get the slow moving items.
-
Report to know the Materials not yet costed
Hi Experts,
Can anyone suggest a standard Report to know the Materials not yet costed in ECC.5
Thanks and RegardsDear Pradeep,
There are 2 ways of addresing this issue,
1.Either create a new material status in T Code OMS4 which throws an error message related to production order,purchase order
creation and assign it to the materials(products) which does not have any released cost estimate.
Once after taking the cost estimate you can remove this setting from the material master.
2.The other way is using user exitrs which checks whether the material has a released cost estimate or not.
Check and revert back.
Regards
Mangalraj.S
Maybe you are looking for
-
Once I open a book in my library there is no option to close it and return to the library. I must leave the app, stop the app and then restart it. How do I exit an opened book to return to my library without having to exit, stop, and restart the app?
-
Error 500 when trying to upload PAR file from NWDS
Since few weeks now, I'm not able to directly upload a par file from NWDS. I'm always getting a operation failed error. In the sap-plugin.log file I've found the following trace: [21.04.09 / 17:51] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpe
-
ITunes error message 7 - Windows error 126
I keep getting the error 7 - Windows error 126 message, and another message about MSCVR80.dll. I have followed all instructions and ITunes still won't open. I have Windows Vista.
-
How to create own Java launcher
Hi, I need to create native launcher for Java in C, C++ or Objective-C. It doesn't matter, but C++ is preferred. I have Java application which access Keychain and I need to have my own process - not java or JavaStubApplication. I have this code: Java
-
Does somebody know how to parse an external XML document in some JSP page? I`ve tried to use the folowing: <%@ taglib uri="http://java.sun.com/jstl/xml_rt" prefix="x" %> <x:parse uri="some.xml" var="xmlSrc"/> ...but it don`t work! Says that uri attri