Report on OA target value and net value

Hi all,
Is there any standard report that can list out the target value and net value of a number of OA? The values are similar to ME33K -> Header -> Statistics -> General. Thanks.

Thanks all. I had found the answer. It should be transaction ME3L, change layout to select "Released value" and mark the column to show total value.

Similar Messages

No Target values and Ratiings displayeed in SL report

Hi ,
I have configured Service level reporting for R3 system in solution manager, in Key perfromance indicatiors node->target KPI TAb->i have provided teh target values for the KPI's.
The report is generating every week, but in the report for KPI section, i m missing the target values and the ratings in my generated report.
Area Indicator Actual Value Target value Rating Trend
In the above columns i dont see any data/values under target value and rating , though i have already maintained this in set up SL reporting
Anand

Hi Solman Gurus,
Can anyone provide any inputs please
Anand

Open Target Quantity and Open Target Value in Contract

Hi,
When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value' of contract.
Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
Thanks,
Siddhi

Hi,
Thank you for the reply.
I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
Can anybody please help me with getting this logic?
Thanks,
Siddhi

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

Report for total IR value total GR value and Total P.O value

Is there is any report to get IR value GR value and P.O value as well............?
i don't need balance i want completed P.O and GR IR value with quantity.......
Please help me to get this kind of report in SAP
Thanks
Neha

Hi,
You can find change view option in ME80FN by executing the report and its available near by print and change layout button.
Click on the change view > select purchase order history.
You will get the required report then.
Also you can make the Z enhancement with the help of abapor.
Thanks & Regards,
Sandesh Sawant

Report with goods receipt value and invoice posting value

Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

Hi
Please check MC$4 transaction, mey be helpful.
regards
Srinivas

How to get line item net price and net value?

I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?

Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty

Entering Source and Target Values in Value Mapping

Hi,
Is there any auomative way of entering source and target values in Value Mapping or FixValues instead of manually entering the values.
I have around 400 values to be entered on both sides.....just thinking of an easy way to do it....
Thanks for suggestions.
Regards,
Bharani

Hi,
Use value mapping replication
chk this link as to what SAP docs say on value mapping replication
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
Value Mapping replication - Value Mapping replication
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
ValueMapping using the Graphical Mapping Tool
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards,
Swathi

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

Modify target value in contract to be more than 1 000 000 000 LE

I am working in ECC6, MM module,
i want ask some quistions,
1-modify target value in contract to be more than 1 000 000 000 LE.
2-printing all un released documents.
3-all available reports detailed in MM.
4-modify percentage in fields to be 3 digits instead of 2 digits.
BR,
Amr Awad

Hi,
if you need to create an appropriate content structure, you have to consider many aspects. If the amount of content is small, many of these aspects are not that important, but if the number of elements/pages are getting larger, they will get important.
One aspect to know is the way how this content is accessed. Is your primary access pattern search or browse? In the search case the location of an element can be quite random, but when you browse you will follow an (intuitive) pattern.
Another aspect is the the kind of access. Do you have many create/delete operations? Only read?
Then: Are these content elements maintained by the system itself (for example by an automatic importer) or are editors required to work on these elements?
The better you can answer such questions, the better it's possible to model a content structure. In practice of CQ5/CRX a few patterns have established like
Natural Hierarchy (like: continent/country/state or brand/branch/product/)
A total ordering of all elements can be established (like postal codes: There you can structure by the orders of the numbers: 5368 could become /5/3/6/8)
A total ordering of elements is being created artificially by hashing methods. This approach cannot/should not be used for content which is maintained by humans.
(and probably more)
In any way I would recommend you to check David's model at http://wiki.apache.org/jackrabbit/DavidsModel
kind regards,
Jörg

Quotation with target value (field ZWERT)

Hello
the requirement is to create a sd quotation, which is not based on target qty or order qty!! furthermore I need to have a sd quotation which is based on target value. Is there any way to have this? I tried all the standard quotation types (AG, AV, AS, ...)! All of them are qty based not value based! What can I change in customizing to have it value based? could it be solved by change the field "Screen sequence grp." from AG to WK1 without change any logic for standard quotation reports??
please help...
thx
deniz

For me, it does not make sense. Just from practical approach point of view, a seller would decide his selling price to his end customer based on what off-take they are going to lift. Having said this, to decide the final selling price, you need to know what quantity you are going to sell. You cannot fix the selling price for who orders 10 nos. and sell at the same price for those who orders 1000 nos.
G. Lakshmipathi

How to get message Target value exceeded for value contract in consignment

Hi Gurus,
I have created a value contract in consignment process.
When the TOTAL VALUE of the release orders exceed the TARGET value of the value contract, system is NOT alerting me with message "Target Value Exceedded".
In normal value contracts, system throws error message while creating release order if target value is exceeded.
How such message can be generated in case of consignment process?
Is there is any configuration involved for item category 'K' for this requirement?
Thanks in advance,
Regards,
Sastry

Hi,
Thanks for the reply.
Those messages are already configured and they are working fine for my normal contracts.
I need such messages for value contracts in consignment process (item category 'K').
As there is no net price in consignment PO, such messages are not generated even though required messages are already configured.
Is there any other thing I need to do for CONSIGNMENT process
Regards,
Sastry

Set Target Values-Disabled

Hi,
I am trying to run a load in iSetup 11.5.10.2. I tried to upload snapshots for Accounting Calender and Suppliers but in Load Request: Review and Edit Data the Set Target values is disabled/Greyed out.
I understand that Set Target values is available for certain setup's only. In the user guide I had seen an exaple for Accounting Calender hence tried that.
Any inputs by this is disable would be very helpful.
Regards
Vikas

Hi,
I dont think there are is any seeded setup which can set the KPI at the WIP level and run reports on them. But there are standard reports which will give you the trend
i.e. Capture WIP Inventory Trend, Capture Production Indicators, Capture Production Performance. These are only based on the transaction date ranges and they dont look at any setups but only at the transacted data (move transactions, material transactions and resource transactions).
Thanks
Karthik.

SSAS SSRS Report Action on Cell Value w/ Embedded Single Quote Not Executing

I have configured an SSAS 2008 R2 cube SSRS ReportAction. I'm having problems when the member value for a cell has an embedded single quote, e.g. abc's. The action displays on the context menu appropriately, but when I click on the action, nothing happens.
For member values that do not have the single quote, the action works as designed. I've added a calculated ember to escape the embedded single quote by adding another single quote, e.g. abc''s, with no luck. Is there a resolution or workaround for this?

Hi Mdccuber,
According to your description, you create a reporting action in you cube, and it works fine except the members that have embedded single quote, right? In your scenario, it seems that you pass this value to the report as the parameter.
In SQL Server Analysis Services (SSAS), when pass values to a report, multi-select parameters have to be placed into IN statement and SQL Server Reporting Services (SSRS) will do single-quote wrapping for string values automatically. In this case, the original
value that have embedded single quote will be damaged. So this action not work. You can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product.
Regards,
Charlie Liao
TechNet Community Support

How to get parameter value from report in event of value-request?

Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
Jack

You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10)           type c obligatory, "field with F4
p_desc(40)            type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*&      Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
    l_desc             like p_desc,
    l_dyname           like d020s-prog,
    l_dynumb           like d020s-dnum,
    ls_dynpfields      like dynpread,
    lt_dynpfields      like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
    with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
    into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 0.
endform.                                                    "f4_field
*&      Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
    if screen-name = 'P_DESC'.
      screen-input = '0'.
      modify screen.
      exit.
    endif.
endloop.
endform.                    "lock_p_desc_field

Report on OA target value and net value

Similar Messages

Maybe you are looking for