Report on Opening and Closing WIP

Hi Gurus,
Please tell me how can we get any report on Opening or closing WIP on daily basis.
Please tell me asap.
Thank You

Hi,
Please check the following reports. It may help you
S_ALR_87013151 - Actual/WIP: Cumulative
S_ALR_87013152 - Actual/WIP: Periodic
S_ALR_87013092 - Work in Process
Regards,
Jigar

Similar Messages

  • COPA reporting with open and closed projects

    Dear All,
    I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
    Any ideas will be greatly appreciated.
    Thanks,
    Maddy

    Dear Satya,
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
    An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
    You can also set an item to Closed manually. <b>This item will then not be taken into account by the materials planning and control system.</b>
    You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
    When changing a purchase requisition, on the item detail screen
    When creating a purchase order referencing a requisition, on the item detail screen of the PO
    You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
    The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
    Analyses of Purchase Requisitions:
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
    Hope this will help.
    Regards,
    Naveen.

  • Material wise reciept and Issue report with Opening and Closing Stock

    Hi
    I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
    Or we have to go for Customised Report.
    Please reply

    Hi,
    MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
    Regards,
    Laxmi

  • Valuation class wise stock report for opening and closing stock

    Dear all,
       My Clint is asking the report for the opening stock and closing stock with respect to valuation class is there any standard report is available please guide me
    regards
    pramod

    Dear sir,
    in my case matarial is split valuated matarial, matarial is maintained with two valuation classes
    when  seeing the report  MB5B its not showing the price valuation class vise, its showing combined together only, again i am using the MC.9 there also same problem its not showing both the valuation class vise price its showing only one valuation class price, if we check for another valuation class price for that particular matarial its telling no data is availabel for the valuation class
    regards
    pramod

  • Reports of opening and closing balnaces (Date Wise)

    Hi all
              Here my ques is that
    i am not able to get opening balance of item day wise with  closing balance in excel reporting?
    Thanks & Regards
    Amit

    Hi,
          try inventory Audit report in SAP B1 Inventory Module. You will get some idea.
             inventory -> inventory reports -->  inventory audit report

  • Functional Specification For Opening And closing stock On Particular Date

    Dear Gurus,
    I am creating report for opening and closing stock on particular date in which batch and storage location should also be included. I want to know the tables and fields for the same.I have searched the forum and got report on month basis but I want this report on posting day basis.kindly suggest tables and fields. Thanks in Advance

    Dear sir,
    There are many other colums that client wants to add which are not present in MB5B transaction.columns which client wants to add are as follows...
    Material Number                                                   
    Material Description                                       
    Material Type                                                                        
    Material Group                                                                     
    External material Group                                                            
    Movement Type     
    Plant     
    Storage Location     
    Customer Number     
    Customer Name     
    Vendor Number     
    Vendor Name     
    Posting Date     Receipt Doc. Number
    Issue Doc. Number     
    Reference Issue Document Number     
    Opening Stock Quanity     
    Material Receipt Quantity     
    Material Issue Quantity     
    Material Closing Stock Quantity      
    Value Of Closing Stock
    And for this I want  tables and logic for the same. kindly provide the solution for the same.

  • Opening and Closing balance of a material

    How to check the opening and closing balance of a material in a given period?
    GL account /Plant/material number is known
    Can we see along with the PO/reservations made  in this period?
    Is there any report or Tcode?

    In mbew and mbewh table u will get the value and stock of material at plant level  for each period( if plant is valuation level ) . GL account u will get from valuation class attched to material master.
    Else use fi tcodefbl3n .
    if u want closing balance for period 6 then you  goto fbl3n and run the report for the GL ACC of stock till period 5. In that go to menu and in that special fields add bseg-matnr and bseg-plant and then sort the report on material/plant level. this will opening balance for period 6.
    then run same report till period 6 and this will give closing balance for period 6.
    this two report give opening and closing balace for period 6.

  • Query for Opening And  Closing Stock

    Hi Experts...
    I need a report for Opening and Closing stocks and Goods Receipt and Goods Issue for Raw Materials and Finished Goods and Consumbles ..instead of going for different reports for each we need a combined report which can display for all Raw Materials, Finished Goods and Consumbles and we need it for a specific date range Material type(Raw MAterials,Finished Goods, Consumbales)
    and below is the format i needed.
                                                                           RAW MATERIALS /FINISHED GOODS/CONSUMBALES
                            Opening Stock                      Closing Stock         Goods Receipt                  Goods Issue
                             Qty   Value                             Qty   Value                     Qty   Value                      Qty   Value
    Item Name
    Regards,
    Vamsi.

    Hi Guys.
    I need an Inventory stock report with Item name, Opening Stock,Goods issue Quantity,Goods Received ,Item Price,Location ,(Closing Stock)Total Value.
    We need the input by Date Range and Item Group and Location(if Possible) Below is the Code i used to run the report.
    Pls Update the Query...
    Declare @FromDate Datetime
    Declare @ToDate Datetime
    Declare @Group nvarchar(10)
    Declare @Whse nvarchar(10)
    Set @FromDate = (Select min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]')
    Set @ToDate = (Select max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]')
    Set @Group = (Select Max(s2.ItmsGrpCod) from dbo.OITB S2 Where S2.ItmsGrpNam = '[%2]')
    Set @Whse = (Select Max(s3.Warehouse) from dbo.OINM S3 Where S3.Warehouse = '[%3]')
    Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription), sum(a.[Opening Balance]) as [Opening Balance], sum(a.[IN]) as [IN], sum(a.OUT) as OUT,max(a.Price) as 'Price', ((sum(a.[Opening Balance]) + sum(a.[IN])) - Sum(a.OUT)) as Closing from dbo.OITM I1
    Left JOIN (Select N1.Warehouse, N1.Itemcode, N1.Dscription,N1.Price, (sum(N1.inqty)-sum(n1.outqty)) as [Opening Balance], 0 as [IN], 0 as OUT
    From dbo.OINM N1
    Where N1.DocDate < @FromDate and N1.Warehouse = @Whse
    Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.Price
    Union All
    select N1.Warehouse, N1.Itemcode, N1.Dscription,N1.price, 0 as [Opening Balance], sum(N1.inqty) as [IN], 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <= @ToDate and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.price
    Union All
    select N1.Warehouse, N1.Itemcode, N1.Dscription,N1.price, 0 as [Opening Balance], 0 as [IN], sum(N1.outqty) as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and N1.OutQty > 0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.price) a ON a.ItemCode=I1.ItemCode
    where  I1.ItmsGrpCod = @Group
    Group By a.Itemcode
    Order By a.Itemcode
    Regards,
    Vamsi.

  • MB5B Report table for Open and Closing stock on date wise

    Hi Frds,
    I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
    Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
    Thanks
    Mohan M

    Hi,
    Please check the below links...
    Query for Opening And  Closing Stock
    Inventory Opening and Closing Stock
    open stock and closing stock
    Kuber

  • Open and closing balances std report

    Dear All,
    please suggest me open and closing balances std report and can i suggest my user below t.code for viewing open and closing balnces for India scenarion T.code:J3RFLVMOBVED
    Regards
    Gopal.S

    hi
    kindly chk MB5B it will fullfill your requirement
    regards
    praveen.k

  • Vendor Line item with Opening and Closing Balances report regarding

    Dear All,
    I need a report for vendor line items with Opening and Closing balances.
    Thanks in advance
    Sateesh

    Hi
    Try S_ALR_87012082 - Vendor Balances in Local Currency
    Regards
    Sanil Bhandari

  • Opening and closing stock report

    Hi,
    i have to develop  a report in abap of stock (Opening and closing stock) with each material, plant, business area & monthly date wise. I got some fields from mseg like material number, plant, business area but i didnt get fileds like opening stock, purchase, consumption & closing stock
    in report fileds should be like
    material number
    plant
    business area
    posting date
    opening stock
    purchase
    consumption
    closing stock
    kinldy help <removed by moderator>
    Moderator message: Welcome to SCN!
    Moderator message: please search for available information, ask a functional consultant near you.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 21, 2011 3:35 PM

    Yes umesh from external 99% of your stock from mvt 101, 501 is very rare case & 561 is not from external source it is initial stock updation which will be done only once when you are going live & later 561 mvt will be normally blocked for use.
    You can also sort in MB5B more than one movement type click on multiple selection (that is on yellow arrow icon) & in single value tab enter mvt 101 below that 501.
    This will give you report for mvt types 101 & 501 in this way you can also sort reports for more than one mvt type.
    Regards
    Rang
    Message was edited by:
            Ranganath Mysore

  • Opening and closing Stock report at Storage location level- date wise

    Dear all
    Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
    Thanks
    Sam

    Do  I have the option of  selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
    pls gudie
    sam

  • Inventory opening and closing stock with value report

    Hi All,
    Is it possible to get details of both opening and closing stock with value of each items of last financial year (2009-10) in inventory report?
    Mizan

    Hi..
    you can  try this query
    Declare @FromDate Datetime
    Declare @ToDate Datetime
    set @FromDate =
        (Select min(S0.Docdate) from OINM S0 where S0.Docdate >='[%0]')
    set @ToDate =
        (Select max(S1.Docdate) from OINM S1 where S1.Docdate <='[%1]')
    select * from
        SELECT T0.itemcode,
        min(T0.Dscription) as 'Item Description',
        min(B1.ItmsGrpNam) as 'Item Group', W1.Whscode, C1.Location,
        (isnull((
            Select sum(isnull(inqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode
            and O1.Warehouse=W1.Whscode
            and O1.docdate<@FromDate ),0)-
        isnull((
            Select sum(isnull(outqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode
            and O1.Warehouse=W1.Whscode
            and O1.docdate<@FromDate),0)
        ) as [Opening Stock],
        isnull((
            Select sum(isnull(inqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode
            and O1.Warehouse=W1.Whscode
            and O1.docdate>=@FromDate
            and O1.docdate<=@ToDate and O1.inqty>0
            and O1.transtype in (20,18)),0
        ) as [Purchase Quantity],
        isnull((
            Select sum(isnull(outqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
            and O1.docdate>=@FromDate and O1.docdate<=@ToDate
            and O1.outqty>0 and O1.transtype in (21,19)),0
        ) as [Purchase Return Quantity],
       isnull((
            Select sum(isnull(outqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
            and O1.docdate>=@FromDate and O1.docdate<=@ToDate and O1.outqty>0
            and O1.transtype in (13,15)),0
        ) as [sale Quatity],
        (isnull
            Select sum(isnull(inqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
            and O1.docdate<=@ToDate),0
            isnull((
                Select sum(isnull(outqty,0))
                from OINM O1
                where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
                and O1.docdate<=@ToDate),0)
        ) as [Closing Stock]
        FROM OINM T0
        INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode
        INNER JOIN OITW T2 ON T1.ItemCode = T2.ItemCode
        INNER JOIN OITB B1 ON T1.ItmsGrpCod=B1.ItmsGrpCod
        INNER JOIN OWHS W1 ON T2.WhsCode = W1.WhsCode
        INNER JOIN OLCT C1 ON W1.Location=C1.Code
        Group by T1.itemcode, T0.Itemcode, W1.WhsCode, C1.Location
    ) a
    where (a.[Opening Stock]
            +a.[Purchase Quantity]
            + a.[Purchase Return Quantity]
            +a.[sale Quatity]+a.[Closing Stock]
           ) !=0
    Regards,
    Bhavank

  • Open and closed invoices

    hi experts,
    I have to capture the parked, open and closed invoices in a report in reference to vendor...
    I got the parked invoice condition from the table BSTAT either v or w.
    But i am not getting the idea how to capture the open and closed invoices...
    Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
    SIRI

    Hi,
    you can use the same query...Also check the new code after the select..
    SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
    FROM BKPF
    INTO TABLE T_BKPF
    WHERE BUKRS = P_BUKRS
    AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
    AND BLART = P_BLART
    AND CPUDT IN SO_CPUDT " Selection screen input.
    IF NOT T_BKPF[] IS INITIAL.
    SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
    INTO TABLE T_BSEG
    FOR ALL ENTRIES IN T_BKPF
    WHERE BUKRS = T_BKPF-BUKRS
    AND BELNR = T_BKPF-BELNR
    AND GJAHR = T_BKPF-GJAHR
    AND EBELN IN SO_EBELN " selection-screen input
    ENDIF.
    LOOP AT T_BKPF.
    Parked
      IF T_BKPF-BSTAT = 'A'.
        WRITE: / T_BKPF-BELNR , ' - Parked'.
    process the next record.
        CONTINUE.
      ENDIF.
    Check for Open / Closed.
      LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                                   AND      BUKRS = T_BKPF-BUKRS
                                   AND      GJAHR = T_BKPF-GJAHR
                                   AND      AUGBL <> ' '.
        EXIT.
      ENDLOOP.
    If the return code is 0 then the document is cleared..
      IF sy-subrc = 0.
        WRITE: / T_BKPF-BELNR , ' - Closed'.
    Else the document is not cleared.
      ELSE.
        WRITE: / T_BKPF-BELNR , ' - Open'.
      ENDIF.
    ENDLOOP.
    Thanks,
    Naren

Maybe you are looking for