Report on Packing
Hi all,
I am looking for a way to report on Handling Units pe shipmnet, and material lines per handling unit along with the User ID that created the handling unit. Seems all other aspects of LE there is some way to determine a line/hour effeciency rate by user ID, but I have yet to find a solution for packing, which is also our biggest bottleneck in the process.
Thanks
dw
Thanks. We are able to extract the data we need from the 2 tables and are working on a broadcast reeport.
dw
Similar Messages
-
Crystal Report Service Pack Question
Hi,
I have some question regarding Crystal Report Service Pack for different version respectively :-
Crystal Report 9
1. I have SP5 and SP7. Can I just install SP7 without installing SP5 ?
Crystal Report XI R2
1. I have install a distribution of Crystal Report X1 R2 in a non-development server.
Can I install the latest SP6 into that non-development server ? Which SP6 I should install, preferably a link to that SP would be great.
NOTE: I am a VS.NET 2003 and 2005 developer.
Best regards
JosephCrystal Report 9
1. I have SP5 and SP7. Can I just install SP7 without installing SP5 ?
- Yes
Crystal Report XI R2
1. I have install a distribution of Crystal Report X1 R2 in a non-development server.
Can I install the latest SP6 into that non-development server ?
- no. From CR XI on, SPs are only meant to be used on development computers. E.g.; a computer that has the CR designer installed. To update your runtime computer, you will have to uninstall the current runtime and install the SP6 runtime:
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Crystal Reports Service Pack 2
Do I need to install Crystal Reports Service Pack 1 and all the hotfixes before I install SP2 or is it all inclusive?
Hi,
It is not mandatory to install service pack and hot fixes for SP 2.
If we have the set up with crystal reports XI R2 with SP2 then we can install them directly.
Try to run the set up which we have and check with the version number 11.5.3.417 is with SP1.
Then we can install SP2 directly on SP1.
If we have only crystal reports installed on our machine then we have 11.5.0.883 version.
If we have SP2 installed on our machine then version no is 11.5.8.826.
Thanks,
Naveen. -
Report for Packing Particulars
hi,
We need a report for the Stock Transfer Advice Value Particulars based on the Packing Code [from MARC table], Plant, Material, Distribution Channel, Sales Org [almost from 5 tables like MARC, LIKP, LIPS, A820, KONP] basing on the delivery date between the start and end dates of price in a820.
The format Should be as Below:
PACKINDCODE- BASIC VALUE - No of C/S - TOTAL BASIC VALUE - Material Requirement Planning .
Please Provide an Idea and Steps to Proceed further.
Thanx in Advance,
Regards,
KAMAL KPDear Goutam
Through <b>FBL5N</b>, you have to select "<b>Cleared items</b>" with "from to date" and execute.
You will get a list which can then be downloaded as excel by selecting "List" on top left followed by "export" and "spreadsheet".
Thanks
G. Lakshmipathi -
Crystal Report Service Pack and Fix Pack
Dear coleagues,
I have crystal reports with sp3 client, i would like to know if i have install fix pack 3.1 until 3.5 ??
Thanks in advance.
FabrícioHi Fabrício,
You can apply just FP 3.5, all previous Fix Packs are inclusive.
Thank you
Don -
Crystal Reports Service Pack 1 installation
I am trying to install service pack one for crystal reports 2008. It downloads, and starts the install, but says it cannot find crystal_reports.msi, which is not in the dowload folder. I have to cancel, and it backs everything out. How do I get around this?
I first installed SP0, and now SP1 installs correctly
-
Hi,
I have developed an application that uses CR Basic for Visual Studio 2008. This application use the CRRedist2008_x64.msi / x86.msi.
On the Page https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm i found different Language Pack but there is no language pack for Italian.
Can someone tell me where i can find the language pack for Italian?
Thanks in advance.See KB [1493664 - Where is the LanguageResourceFiles.zip file?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433393333333633363334%7D.do]
At the bottom of the above KB, there is a link to an attachment that contains all the language resource files.
- Ludek -
Crystal Reports Service Pack and Fix Pack documentation
I've been maintaining a wiki that documents fixed issues, specifically targeted at the .NET developer. The link to that wiki:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=163843498
For now, I'll keep maintaining the wiki, but if it is a duplication of effort and not used, I'll take it down.
LudekUmm......thanks for the feedback Ludek. You've obviously taken the time to read the documentation.
My question:
Why doesn't the "CR2008 FixPack 2.8 Fixed Issues" document list any issues fixed in FP2.8. The last I heard Jason was asking about this.........
Also where is the documentation for Fix Pack 2.9?
Thanks,
Peter. -
Reporting Tab is not showing in SCSM 2012 SP1 Console
I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre. -
Crystal Report Integration Problem with VS 2012 Ultimate
I installed Crystal Report (Support Pack 13 v.13.0.13.1597) for VS 2012 Ultimate. When I create a crystal report, the Crystal Reports Gallery didn't pop up. Instead it just jump to *.rpt file and shows one hell of a hex codes
Did anyone faced the same issue, like mine?
Pliz, help me out.Hi MisterEpic,
Welcome to the MSDN forum!
First,
I recommend you verify the ISO checksum for Visual studio 2012. You can download the File Checksum Integrity Verifier (fciv.exe) described at
following locations.
http://support.microsoft.com/kb/841290/en-us
The CRC and SHA1 hash values of the ISO should match these:
CRC: 68068922
SHA-1: 4F1E90E5FDE85AD636233A812A140E89E11A7DEA
Detail from:
http://www.microsoft.com/en-in/download/details.aspx?id=30678
Then, you can use the .NET Framework Setup Verification Tool to verify the installation state of one or more versions of the .NET Framework
Download from :
http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-99-90-04/netfx_5F00_setupverifier_5F00_new.zip
If the verification tool finds any issues, there is a .NET Framework Repair Tool that can be found at the following locations:
http://support.microsoft.com/kb/2698555
More information is in the blog at the following locations.
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
Best regards.
Samson sun
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Error: 'bobj' is undefined - crystal report for VS2013 - please help ASAP
Currently we are trying to migrate from VS2008 to VS2013 and we installed Microsoft Visual Studio Ultimate 2013 on a windows 7 laptop. All our crystal report programs are migrated to VS2013. I downloaded Crystal report Support Pack 10 (v. 13.0.10.1385) executable version and installed it. Then opened our old project (from vs2008) in VS2013 and it went through the conversion process. Later I opened each .rpt file and saved in VS2013 so that the crystal report files will be saved in the new format.
I am getting the Error: 'bobj' is undefined when I try to run the report. Am I using the correct service pack 10, or should I use service pack 9. I have read through all the posts related to this error in earlier version of VS. Is there any correct fixes for VS2013?
This is urgent, I am stuck with this error. please help??? Thank you.
JSDon,
I followed Adil Siddiqui's Blog and it worked!!!!
Add Following code to web.config file
<configSections>
<sectionGroup name=“businessObjects“>
<sectionGroup name=“crystalReports“>
<section name=“rptBuildProvider” type=“CrystalDecisions.Shared.RptBuildProviderHandler,
CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral,PublicKeyToken=692fbea5521e1304, Custom=null“ />
<section name=“crystalReportViewer” type=“System.Configuration.NameValueSectionHandler“ />
</sectionGroup>
</sectionGroup>
</configSections>
<businessObjects>
<crystalReports>
<rptBuildProvider>
<add embedRptInResource=“true“ />
</rptBuildProvider>
<crystalReportViewer>
<add key=“ResourceUri” value=“~/crystalreportviewers13“ />
</crystalReportViewer>
</crystalReports>
</businessObjects>
NOTE: “<add key=“ResourceUri” value=“/crystalreportviewers13“ />” worked without the ~ sign.
Click the link below for the complete post:
Visual Studio 2012 Crystal Report not working on Windows Server 2012/ 0x800a1391 &#8211; JavaScript runtime error: &…
Thank you Don for your help.
JS -
Please also see attachment (same info as below).
Background
This code works in windows XP (32 bit), using/complied VS2005 with no problems.
Please contact:
Hamid Deljoo at work 416-867-8977 (8am to 4pm EST)
Problem is:
We are migrating this code from XP to windows 7 (using win7 64bit for development to be deployed on win7 PCs 64bit).
When trying to display a crystal report (.rpt) an exception is raised.
Exception info is:
CrystalDecisions.CrystalReports.Engine.DataSourceException was unhandled by user code
Message=Failed to load database information.
Error in File wbstats {CC56070D-0873-4815-BAD5-0DA0FBAEDCB6}.rpt:
Failed to load database information.
Source=CrystalDecisions.ReportAppServer.DataSetConversion
StackTrace:
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export(ExportOptions options)
at net.bmogc.cas.ui.ReportViewer.LoadStatsReport(String warmBodyCode) in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\ReportViewer.cs:line 739
at net.bmogc.cas.ui.WarmBodyManage.Stats() in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\WarmBodyManage.cs:line 873
at net.bmogc.cas.ui.WarmBodyManage.CASAuthgation_ToolStripItem_Click(Object sender, EventArgs e) in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\WarmBodyManage.cs:line 593
at net.bmogc.cas.ui.CASAuthgation.<>c__DisplayClass15.<CreateToolStripItem>b__14(Object sender, EventArgs e) in c:\Projects\Juniper\CAS_.NET2.0_Win7_64bit\CASApplication\CASNet\Common\CASAuthgation.cs:line 1242
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
InnerException: System.Runtime.InteropServices.COMException
Message=Failed to load database information.
Error in File wbstats {CC56070D-0873-4815-BAD5-0DA0FBAEDCB6}.rpt:
Failed to load database information.
Source=""
ErrorCode=-2147482931
StackTrace:
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
InnerException:
Background info is:
Vs2013 (update 3, latest version) is used.
Installed: Crystal Reports, Support Pack 10 (v. 13.0.10.1385), using 64 bit
VS2013 build settings.What database are you using?
What database client?
How are you connecting to the database (ODBC, OLE DB, etc.)?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.
I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue?? -
How to schedule reporting agent job?
Hi,
I have start a reporting agent pack after changing the
variant. Now i have changed the variant.
Then how to schedule the reporting agent pack?
could any one help me out....
Thanks
SrinivasHi,
Check this.
http://help.sap.com/saphelp_nw04/helpdata/en/45/67bd3cad649f5ce10000000a114084/content.htm
Regards. -
Notification: "The report deployment process in in progress"
Hi All,
We're implementing Service manager and we have an issue with the reporting management packs.
Upon opening the Service manager console we're getting the error:
"The report deployment process in in progress. To determine when management pack deployment is complete, see the procedure in the service manager deployment guide. You can view reports after management packs have been deployed."
I've consulted the guide and the MPsyncjobs tasks runs and completes in under 1 minute, the Get-SCDWJob command returns the following:
BatchId Name Status CategoryName StartTime
6490 MPSyncJob Not Started Synchronization
6482 DWMaintenance Not Started Maintenance
6488 Load.Common Not Started Load
6484 Load.OMDWDataMart Not Started Load
6485 Load.CMDWDataMart Not Started Load
6492 Extract_DW_SBCSMDW Not Started Extract
6486 Transform.Common Not Started Transform
In the GUI under "data warehouse jobs" the job MPSyncJob is Not started but in the details section under Job Progress it's stuck at 48/48 and looks like it's running.
I'm new to System Center so if anyone could point me into the right direction to work out how to get reporting working that would be great.
Thanks.Modified the required files as per the specifiacation in both xml and properties files .
Deployed the service successfully.
But problem is it's not picking the file from the source server.
Please guide me how to test the service...in the bpel after deploying the service...
how the check the service log ?
Maybe you are looking for
-
How do I display my results in dynamic text.
I need to show the results in my flash program. The results are working great in a trace. I get the text to show, but not the results from high1.lab, high2.lab and high3.lab. status_txt.text = '\nAnd here are the top 3 from those categories:';
-
How to reinstall bootable system 9 in a PowerPC G4/1.25 DP (Mirrored Drive)
Hi all, I have two machines bootable with OSX and OS9 PowerPC G4/1.25 DP (Mirrored Drive Doors) dual 1.25 GHz PowerPC 7455 (G4) and iBook G3/900 900 MHz PowerPC 750fx (G3) I have some MACOS9 software which just doesn't work in classic mode with any O
-
I have just transferred all my iphone videos into my macbook, now I would like to put these videos onto a dvd for playing on any dvd; how would I do that with my usb Superdrive dvd/cd drive. I don't see a option to burn. Please help and responses is
-
Curve 8310: How can I secure a picture folder?
I want to set a password to access selected picture folders on my media card, is there a way to do this?
-
I'm new to the whole plugin field and don't know what to do. Most of T-Rack seems to be working. Does anybody know how to fix this?