REPORT ON PO AND GR DATE, and VENDOR REJECTIONS

Hi Experts,
is there any standard report which shows purchase order date and goods receipt date.Also a report which shows rejections per vendor
Regards,
Sri.......

Hi
There no such report available.
you need to develop report.
MKPF- here you will get material documents with date (BUDAT)
EKPF- here you will get  Pur doc's  with date .
Allign po no(ebelp-ebeln) with MKPF.
Then for rejection you will sort pur doc's with document type RLor RLN (Return delivary).
Hope this will help you.
Regards
S B H

Similar Messages

  • Report of  GR no,GR date,qty,Vendor for a list of PO

    Dear all
          Kindly let me know the T.code to get report of GR no,GR date,qty,Vendor for a list of PO
    regards
    M.Chandra mohan

    Hi chandra
    i agree with karthik
    U can get field <b>Purchase order in MB51</b> but u need to do configuration for this
    goto Spro>Materials Management>Inventory Management and Physical Inventory>Reporting>Define Field Selection for Material Document List-->here select <b>Purchase order number</b> (prog. name RM07DOCS table MSEG field EBELN then tick selection field
    Now u can view purchase order number in MB51
    Vishal...

  • HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    See this -> http://support.apple.com/kb/HT2727

  • I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

    I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

    Restore it using the computer you normally sync with.

  • Get-Content and add Date and Time in a new file

    Hello,
    in a existing file I have data like:
    1;Idle
    5;chrome
    1;spoolsv
    Now I need to grab the content and add date and time in front of each line and save it to another file like:
    07.04.2015;10:18;1;Idle
    07.04.2015;10:18;5;chrome
    07.04.2015;10:18;1;spoolsv
    But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
    Greetings

    Hello,
    If you need a new file with the desired output try this
    get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
    regards,
    V
    Venu

  • Keychain problem and "Set date and time automatically"

    Something very strange appened to me today. I spent a few hours to get it through.
    All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
    Sorry for my English (I'm from Italy).
    Someone got the same issue?

    That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
    Would you mind double-checking the following setting, using the AirPort Admin Utility?
    AirPort Tab - Base Station Options: Logging/NTP
    - Set Date & Time Automatically: time.apple.com (checked)
    Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router?

  • I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    Have you went to Settings>General Time&Date and correct the time.  Make sure the time zone is correct too.  Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

  • When attempting to format region and set date and time the busy icon appears and seems to stay like this?

    when attempting to format region and set date and time the busy icon appears and seems to stay like this?

    Click on DU's Partition tab when you have the raw drive name selected, then set it to one partition, Mac OS Extended. If it crashes or freezes, it is finding a bad block and can't write.
    In any event, if you want to use the drive, and have not zeroed it before, you should now.
    Click on Erase -> Security Options -> Zero out data. Still with the full drive selected and not any partition(s).
    Then repartition the drive if needed.
    Boot from the DVD if that doesn't work. And no, TTPro has never mapped out bad blocks let alone create partitions.
    Disk Utility in 10.4.8 is quite good, excellent in fact. No need for an alternative.
    Your eMac drive may need to touch of Disk Utility itself. FSCK from the command line, clear the caches with Applejack along with check for corrupt plists. Between Disk Utilty and Applejack (free/shareware) never had to use TechTool Pro - or at least there weren't any errors after those two got done. But if you want a good 3rd party, pick up Disk Warrior 4.

  • I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

    I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

    Hi,
    Which operating system are you running on?
    The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
    The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
    Brian

  • I can't activate my apple Tv and set date and hour. Why?

    I bought my apple Tv and when i's trying getting started It, the message "Ativation" and "seting date and time" never desapear.
    If I try to force to go to menu, I can't activate my itunes account...
    Anybody could help me?

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.

    I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.

    No, but if the answer was yes it's a little late to start getting freaked out about it.

  • Difference between a starting date and time and ending date and time

    Hi All,
    I need to bring out the difference between a starting data and time and ending date and time. Difference should be in time I mean it should be in hours or minus or seconds.
    I am sure there must be a Function module for this, Has anyone of you been in search of this kind of FM, Kindly suggest me. It is urgent.
    Thanks
    Mahen

    Hi,
    Check this out.
    data : date1 type dats ,   " System data type for Date (sy-datum)
           date2 type dats,
           time1 type tims,      " System data type for time (sy-timlo)
           time2 type tims,
           days  type i,
           scd   type i,
           t_mt  type i.
    days = date1 - date2. " Diference in days.
    Scd  = time1 - time2. " diference in seconds.
    t_mt =  ( days * 24 * 60 ) + ( scd / 60 ).
    total diference in minute
    <b>Reward Points & Mark Helpful Answers</b>

  • I am confused by the layout of the I tunes Store...recently the entire graphics on the i tunes store pages are a complete mess, not downloading, creating odd layover and jumbled data and making it virtually impossible to access or read. Help!?

    I am confused by the layout of the I tunes Store...Ive had no problems or troubel for YEARS with the I Tunes store, but recently the entire graphics on the i tunes store pages are a complete mess, not downloading, creating odd layover and jumbled data and making it virtually impossible to access or read. I am looking for information or guidance on how to re-boot or fix this - Help?!

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • To display "modified" by and "modifed date" and the end of every sharepoint page

    Hi there,
    I want to display
    "modified" by and "modifed date" and the end of every sharepoint page and I have as many as 2000 pages
    I have the code for it as below which I have placed in my master page
    <SharePointWebControls:DateTimeField FieldName="Modified" EnableViewState="true" Visible="true" runat="server" ControlMode="Display"/>by
    <SharePointWebControls:UserField FieldName="Modified By" Visible="true" runat="server" ControlMode="Display"/>
    The problem is I am not understanding under which div should I place it to be able to see it at the end of the page.
    Please suggest.

    Hi,
    According to your description, my understanding is that you want to insert the two fields at the end of the page by inserting the corresponding controls into the master
    page.
    The figure below will show how to insert code into master page:
    At the end of the page, it will be:
    Thanks,
    Dean Wang

  • Crystal Reports 2008 failed to retrive data, and instead deleted it.

    I have been using crystal reports 2008 for the past year or so with our billing software through an OBDC data source. I was using xp pro sp3. However I recently upgraded to a new computer running xp pro sp3 as well, and now I am having some serious issues.
    When I try to connect to a data source in the database expert, it shows all the tables, and then the field explorer shows the fields, but when I actually try to brows the data, view a preview, verify the database, or refresh an old report it gives me an error and DELETES the .dat file that the field was located in. I am so glad I have regular backups to restore too, because pulling a report nuked 5 .dat files.
    The errors I am getting are as follows:
    "Failed to retrieve data from database."
    Clicked ok
    "Failed to retrieve data from database."
    Clicked ok
    "Database Connector Error: 'HY000:[Pervasive][ODBC Client Interface][LNA][Pervasive][ODBC Engine Interface][Data Record Manager]The file cannot be created with Variable-trail Allocation Tables (VATs)(Btrieve Error 105)'"
    Clicked ok
    "Failed to retrieve  data from database.
    Details:HY000:[Pervasive][ODBC Client Interface][LNA][Pervasive][ODBC Engine Interface]Unable to open table: <nameoftable>"
    Click ok
    and Crystal stays open but has just deleted the .dat file that the table was located in. It will still show the fields but  no data. Trying to open the other software leads to an error "missing <name of table>.dat" It then has to be restored from a backup.
    I have tried updating crystal as well as fully uninstalling it and reinstalling it, we have created a new ODBC connection, and cloned the database for testing purposes. The same thing occurs with the new database and ODBC data source.
    We have no other computers, except my old one that has crystal reports on it. I have tried the old computer again and it is working fine.
    Does anyone have an suggestions? This is pretty critical. Thanks in advance.
    Edited by: Russellk on Jan 13, 2010 8:27 PM

    Hello, you could try turning on ODBC tracing to see if it logs anything. It's a pain to get going but here's how.
    Go to ODBC Admin, Click on the Tracing tab and create a log file and save. Don't start tracing yet. Close the ODBC admin and then re-open it and then turn tracing on. You may have to do this a few times to get it working.
    Once it's tracing then open CR and try the demo data. Then close the report, log off, log onto the real data and do the same with a new report. You'll see a bunch of ODBC API's but there may be one or 2 that don't look right or errors may be logged compared to the DEMODATA.
    Another suggestion is it may not be your PC doing the deleting. Maybe the Server thinks you have infected the data files and it's deleting them. Have a look in anti-virus quarantine logs on the server to see if it's doing the nasty....
    Check the trust between your PC and the server.
    I've also seen this type of odd behaviour with corrupted Profiles. Check with your IT guys on creating a new one for you, it's apain because you loose everything on your work station.
    What happens if you log on from another PC using your account? Does that also delete the files? Or get someone else who it does work for log into your PC, does that work? If so it may be your Profile is either not trusted or it's been corrupted.
    Good luck
    Don

Maybe you are looking for

  • Assign a dynamic value to a field in HTTP receiver header without IR part

    hi experts,     I am doing a scenario in which i am to add a header  field in http receiver, whose value will vary for each transaction. and the value will be same as sender file name. But this all I am to do without doing Repository part.(i.e. No me

  • Creative cloud desktop tool trying to update

    Setup: Running Win7 64bit on Sager NP8760 laptop - cpu: older i7 M820 1.73 ghz - 8GB ram I get a notice from the task bar that `creative cloud' has an update.... ok start the process. I see a dialog that the update is downloading .... I see a dialog

  • Help understanding itunes and sync, itunes 10.5.0.142 does not import

    ok, first, im an old phart at a veterans home, so keep that in mind! Lol. Im not sure I understand Itunes. I thought it was supposed to sync, or keep on your ipod what you have in itunes library. In other words, if I have a play list and I delete a f

  • Why does my website scroll across?

    I can't seem to work out why it is scrolling across I am using the Church Template on BC and the screen width doesn't seem to sit right. Home - Website with issues Home- Testing site that I'm using to compare against I need the Alpha header to be 60p

  • Grid Control Agent on Mac OS

    Has anyone been successful in installing the Oracle Grid Control Agent Only on a Mac OS X? I have used the agent_download script and the software installs. But I cannot get the agent to start. When I execute emctl start agent I get Starting agent ...